Weak Tube, Bad Rectifier, Mystery Faults! | Restoring a Grundig 2120WE part 2 @electronicsoldandnew
Weak Tube, Bad Rectifier, Mystery Faults! | Restoring a Grundig 2120WE part 2  @electronicsoldandnew
Uploaded May 2026 | Updated November 2026, 15 hours ago
In Part 2 of the restoration of this Grundig 2120WE, I was hoping to bring the project to a successful conclusion.

The radio had other ideas.

Although the set was showing signs of life, reception remained frustratingly intermittent. As many restorers know, intermittent faults can be some of the most time-consuming and challenging problems to track down, often requiring patience, methodical testing, and a fair bit of detective work.

Further testing revealed that the mixer/oscillator tube was weak and no longer performing reliably. Replacing it brought a significant improvement, but another issue remained. Supply voltages were still lower than expected, eventually leading me to the real culprit: a failing selenium rectifier.

Out came the selenium rectifier and in went one of my MOSFET Rectifier Dropper Boards, restoring the correct operating voltages and dramatically improving performance.

With the radio now behaving properly, I completed a full RF alignment and the results were extremely encouraging. For a radio that arrived looking neglected and troublesome, it is now performing remarkably well.

Unfortunately, the project still isn’t quite finished.

I’m currently waiting for a supply of specialist Bakelite polish to arrive from the UK before tackling the final cosmetic work. Once that’s done, I’ll complete the presentation of the restored radio and also add a Bluetooth receiver so it can be enjoyed with modern audio sources.

So the finish line is now in sight—but there’s one more episode to go.

🙏 Want to support the channel?
Patreon: patreon.com/mcaldeira
Paypal: paypal.me/macaldeira
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Grundig 2120WE restoration, selenium rectifier replacement, MOSFET rectifier board, tube radio intermittent fault, weak mixer oscillator tube, vintage radio troubleshooting, AM radio restoration, shortwave radio repair, RF alignment tube radio, Bakelite radio restoration, German valve radio repair, antique radio restoration
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

🔍 WHAT'S NEXT? On this channel you’ll find HUNDREDS of my own videos covering restorations of vintage radios, DIY test equipment builds, and practical workshop techniques — all from the bench.
Take a look through the playlists below and dive into the projects that catch your interest.

🎥 Back to Basics Playlist (Detailed Descriptions)
Learn from detailed description of tips and techniques commonly used to restore tube radios — from power supply to final alignment:
youtube.com/playlist?list=PLy5M_tA9ux7JTR9Or7wx0scWuGEnGsiDH

📘 Restoration Building Blocks (Step-by-Step Method)
Details of some of the procedures developed over the years to ensure a succesful project:
youtube.com/playlist?list=PLy5M_tA9ux7JSYx8z2mw303vx287LHpzf

🛠️ DIY Test Equipment (Build Your Own Bench Tools)
Practical test gear projects designed for real workshop use:
youtube.com/playlist?list=PLy5M_tA9ux7KkjmWX0I0zNocg6NF33EfL

📻 Full Tube Radio Restorations (Start-to-Finish Series)
Watch COMPLETE restorations of classic valve radios from teardown to final test. There are literally dozens of projects on the channel, so here are a few to get you going:
youtube.com/watch?v=i8U9Lteja5o&list=PLy5M_tA9ux7IG6XgctidGO0u0DeT3_CxF
youtube.com/watch?v=_HO2bjY5vuw&list=PLy5M_tA9ux7LhcZ9h9plfTFmjaM1mcifu
youtube.com/watch?v=cca4i60ZLw4&list=PLy5M_tA9ux7IWL18nsrSf4RnjsuPjHC-p
youtube.com/watch?v=i4J5l0fwhko&list=PLy5M_tA9ux7JgnyYPRWOK763aJ8bg3iCI
youtube.com/watch?v=RSbt7qVed78&list=PLy5M_tA9ux7IBse5G–Kl89SPS9sATXfZ
youtube.com/watch?v=7x2sK2GSYeE&list=PLy5M_tA9ux7L8e9h8lrHGREPqcgWO-YQm
youtube.com/watch?v=5IsACM0mPzs&list=PLy5M_tA9ux7K3SXDv8Hu4uAyl1O7NE5dc
youtube.com/watch?v=MhG-CH0gqm4&list=PLy5M_tA9ux7IjUykGE8neJSI6GUxMl2YG
youtube.com/playlist?list=PLy5M_tA9ux7L3k5nPRvrk1aH764QRCTqE
youtube.com/playlist?list=PLy5M_tA9ux7KhVk0KqPx0Wkh2KO_5f2fQ
youtube.com/playlist?list=PLy5M_tA9ux7IqvS-LshUGpE1D_WY6mrZe

📻 Vintage Solid-State Restorations (Start-to-Finish)
Here's a Playlist with the numerous restorations of both transistor radios and other solid-state equipment presented on the channel:
youtube.com/playlist?list=PLy5M_tA9ux7Ig10Bj7kznPmvdVFmwpsvk

⚡ Featured DIY Tool Projects
youtube.com/watch?v=0pySErvzUIY&list=PLy5M_tA9ux7KWexvEjLB0SANSxQXi0zTS
youtube.com/playlist?list=PLy5M_tA9ux7JC_5Q4A0P7VrVbuEXcTEwm
youtu.be/0c5ffSIuI-I

🧭 Explore the Channel
Browse playlists for more tube radio restorations, transistor radios, DIY electronics builds, and workshop tools. Have fun, and .... stay sane.

#TubeRadio #VintageRadio #RadioRestoration
Weak Tube, Bad Rectifier, Mystery Faults! | Restoring a Grundig 2120WE part 2Push-to-Release DIY Antenna Hack Worked Out Beautifully! Sony CRF-320 restoration Pt.7Automatic tuning leads to IF alignment, leads to frustration.  SABA Meersburg 100 restoration part 4Was It Worth Restoring? | Loewe Opta Truxa 3731W Finale – Pt 5Cleaning Up a 1966 Höfner Violin Bass – Vintage Mojo Intact #pcbway#Build an Audio Load Switcher – Workshop Speakers or Dummy Load at the Flip of a Relay! #pcbway#Is This The Ugliest Radio Youve Ever Seen? Loewe-opta Truxa 1701w pt. 1Build an AC/DC voltage multiplier that extends low range of VOM and raises input impedance #pcbway#The Audio Was Perfect… Then the Dim Bulb Glowed! | Grundig 3028 Restoration - part 2Restoring the Rare Bedini Classic 100 Class A Amplifier.Creative Fix for a Missing Tuning Condenser on a Grundig 2447 Tube Radio Restoration pt. 2 #pcbway#How to extend tuning range with an FM RF alignment - Tube Radio Restoration Back to Basics part 13
Electronics Old and New |

Weak Tube, Bad Rectifier, Mystery Faults! | Restoring a Grundig 2120WE part 2

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER