Weak Table Support? See the results... @corvetteguy50
Weak Table Support? See the results...  @corvetteguy50
Uploaded August 2026 | Updated November 2026, 3 hours ago
My goal in today's video is to warn you guys once again about being careful who you listen to online when building and buying your CNC system!

We review pieces of a few different videos I found online. The topics we cover are as follows:
- Hard end stops - guy, use soft limits!
- Using a USB controller on a PLASMA table - that's a no-go!
- Immediately inform the vendor of any damage or you might be left with a very expensive paper weight!

If you have questions or require a consultation - please email me at storm2313@gmail.com

Standalone kits:
Essentials Standalone Package - ebay.com/itm/137509672457
Standalone with ETH and G540 - ebay.com/itm/137515639170
Plasma Standalone Package with THC - ebay.com/itm/137525808956?


🔧 For vetted components, with validated support please visit my store: ebay.com/str/edealersdirect

#CNC #CNCrouter #DIYCNC #CNCfail #IndustrialAutomation #CNCmachining #Engineering

Please do your own research before making any purchase for production robotic components. When in doubt ask, and I highly recommend messaging a vendor to test their response time.

Below is a link to my CNC components that support the issues covered in this video along with other products to support your builds.

ETH-Compact Ethernet Controller & THC Sensor Module
ebay.com/itm/146755320152

SMCU motion controller driver
ebay.com/itm/146206341057

Standard Gecko G540 motion controller
ebay.com/itm/142506267150

20' 16/4 double-shielded spindle cable
ebay.com/itm/131899174942

Here's a link to my UC-400 Ethernet Turnkey Controller package ebay.com/itm/144862296429

CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
ebay.com/itm/133300288430

CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) ebay.com/itm/143650166809

CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter ebay.com/itm/134192466153
Weak Table Support? See the results...CNC Switches: Durability & Accuracy ExplainedBuilding a Custom CNC ControllerWhy My Rev2 CNC Power Supply Needs No SplittersHow to Connect Proximity SwitchesGX16 Male Panel Mount & EMI Filtration SetupSet Your Station to the Perfect Soldering TemperatureG540 System Upgrade: Router to Plasma Cutter Explained!How to Use an ATC Spindle with Mach3Save Time & Money with a G540 Controller vs IDSAvoid THIS Common Mistake when Prepping Your Spindle ConnectorUpgrade Your Setup!
Corvetteguy50 |

Weak Table Support? See the results...

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER