Uploaded October 2026 | Updated November 2026, 7 hours ago
We took Paige's freshly built 1964 Chevelle to Rocky Mountain Race Week 2.0 with ZERO test passes — an untested 454 big block, a carb, and 900+ miles of drag and drive ahead of it. This is Part 1: Day 1 and Day 2.
Part 2 (Days 3, 4 & 5) — including the failure that almost ended our week: youtu.be/tveOuvTaMSA
CHAPTERS
0:00 Zero test passes and no idea if it survives
1:33 Arrival at Rocky Mountain Race Week 2.0 in Great Bend, KS
3:00 No nitrous — racing on motor only
6:06 On the scales: 3,660 lbs with driver
9:35 First pass, a 13.005, and a bottle that won't purge
10:51 Moving to the 13.0 class
17:24 Cold start in 6 degrees with no choke
18:31 12.5 MPG pulling a bigger trailer
21:01 330 miles to Thunder Valley — and no reverse
24:52 Paige runs 12.89 and breaks out
33:59 A 13.003 — near perfect for the class
34:47 First sub-2-second 60-foot
The car: 454 big block Chevy with a fresh top-end, TCI 4L80E 6X 6-speed with a Diablo Blackout shifter, custom transmission tunnel work, NOS plate kit, Tanks Inc retrofit EFI fuel tank, and our drag-and-drive trailer setup. No test passes. Nothing you could call a test mile. We drove it straight into the deep end.
Rocky Mountain Race Week 2.0 route: Day 1 SRCA Dragstrip, Great Bend, KS · Day 2 Thunder Valley Raceway Park, Noble, OK · Day 3 Tulsa Raceway Park, Tulsa, OK · Day 4 Mo-Kan Dragway, Asbury, MO · Day 5 back to SRCA, Great Bend, KS. Race all day, drive hundreds of miles, fix it yourself — that's drag and drive.
Hot rodding the old fashioned way. Low budget, my own two hands, questionable methods included.
Subscribe to OneMoreBolt for budget DIY hot rod builds, big block Chevy swaps, carb and EFI tuning, and drag and drive coverage.
We took Paige's freshly built 1964 Chevelle to Rocky Mountain Race Week 2.0 with ZERO test passes — an untested 454 big block, a carb, and 900+ miles of drag and drive ahead of it. This is Part 1: Day 1 and Day 2.
Part 2 (Days 3, 4 & 5) — including the failure that almost ended our week: youtu.be/tveOuvTaMSA
CHAPTERS
0:00 Zero test passes and no idea if it survives
1:33 Arrival at Rocky Mountain Race Week 2.0 in Great Bend, KS
3:00 No nitrous — racing on motor only
6:06 On the scales: 3,660 lbs with driver
9:35 First pass, a 13.005, and a bottle that won't purge
10:51 Moving to the 13.0 class
17:24 Cold start in 6 degrees with no choke
18:31 12.5 MPG pulling a bigger trailer
21:01 330 miles to Thunder Valley — and no reverse
24:52 Paige runs 12.89 and breaks out
33:59 A 13.003 — near perfect for the class
34:47 First sub-2-second 60-foot
The car: 454 big block Chevy with a fresh top-end, TCI 4L80E 6X 6-speed with a Diablo Blackout shifter, custom transmission tunnel work, NOS plate kit, Tanks Inc retrofit EFI fuel tank, and our drag-and-drive trailer setup. No test passes. Nothing you could call a test mile. We drove it straight into the deep end.
Rocky Mountain Race Week 2.0 route: Day 1 SRCA Dragstrip, Great Bend, KS · Day 2 Thunder Valley Raceway Park, Noble, OK · Day 3 Tulsa Raceway Park, Tulsa, OK · Day 4 Mo-Kan Dragway, Asbury, MO · Day 5 back to SRCA, Great Bend, KS. Race all day, drive hundreds of miles, fix it yourself — that's drag and drive.
Hot rodding the old fashioned way. Low budget, my own two hands, questionable methods included.
Subscribe to OneMoreBolt for budget DIY hot rod builds, big block Chevy swaps, carb and EFI tuning, and drag and drive coverage.
