Uploaded May 2026 | Updated November 2026, 5 days ago
The Makita HS013G is the biggest cordless circular saw money can buy, a 270mm XGT beam saw built to take structural timber in a single pass.
Is it worth it? If you're a chippy who spends half his life flipping heavy beams over to finish a cut, it'll pay for itself in time saved. For anyone else it's far more saw than the job needs.
Sam runs the HS013G through deep cross cuts on big structural beams, a 45 degree bevel at full depth, a 150mm rip cut and a plunge cut, then finishes on a lump of mahogany salvaged from an old ship. It's paired with Makita's VC006GM M-class cordless dust extractor, which shows what proper extraction does for visibility on a cut line.
MENTIONED IN THIS EPISODE π
Makita HS013G Cordless Circular Saw go.skill-builder.uk/makitahs013g
Makita VC006GM M-Class Dust Extractor go.skill-builder.uk/makitavc006gm
KEY TAKEAWAYS
- The 270mm blade goes straight through a big structural beam in one pass, so there's no flipping the timber over and no nib left in the middle of the cut
- The weight works in your favour on a saw this size, because it lets the blade glide through instead of tempting you to push it the way you would with a small saw
- The magnesium base kept the cut square straight out of the box, which isn't a given at this blade diameter
- A 45 degree bevel at full depth is something a 165mm saw simply can't reach
- A 150mm deep rip cut is achievable, but the big blade behaves like a ruler and won't let you micro adjust once you're on the line
- Soft start, an electronic brake and anti-stall all matter more at this size, and the exit side of the cut is where the real danger sits
- The VC006GM runs on two 40V XGT batteries for 80V of extraction, close to a mains machine, though it'll get through batteries on all day use
- AWS Bluetooth fires the extractor off the saw trigger, so it only runs while you're cutting and saves battery
- With extraction hooked up you can see the cut line properly, which on a saw this big is the difference between following your line and hoping
WATCH NEXT
Makita's Best Kept Secret: The DCE090 Cut-Off Saw youtu.be/gfoT7ywbkWk
Milwaukee Rear Handle Circular Saw for Wood youtu.be/G-TZmppFD-k
Makita DSP600 36v Cordless Plunge Saw youtu.be/JriRMW9jEao
CHAPTERS
00:00 The world's biggest cordless circular saw
00:40 Build quality, magnesium base and depth adjustment
01:20 XGT batteries, AWS and the safety features
02:20 First deep cross cut through a structural beam
03:20 Checking it for square
03:50 45 degree bevel at full depth
04:30 The 150mm deep rip cut
05:30 Plunge cut and a slice of ship's mahogany
06:20 The VC006GM M-class cordless dust extractor
07:40 Power modes and battery life
08:30 Cutting with extraction and seeing the line
09:40 Who this saw is actually for
Which tool would you like us to put through its paces next? Let us know in the comments.
#MakitaXGT #CircularSaw #Carpentry #SkillBuilder
The Makita HS013G is the biggest cordless circular saw money can buy, a 270mm XGT beam saw built to take structural timber in a single pass.
Is it worth it? If you're a chippy who spends half his life flipping heavy beams over to finish a cut, it'll pay for itself in time saved. For anyone else it's far more saw than the job needs.
Sam runs the HS013G through deep cross cuts on big structural beams, a 45 degree bevel at full depth, a 150mm rip cut and a plunge cut, then finishes on a lump of mahogany salvaged from an old ship. It's paired with Makita's VC006GM M-class cordless dust extractor, which shows what proper extraction does for visibility on a cut line.
MENTIONED IN THIS EPISODE π
Makita HS013G Cordless Circular Saw go.skill-builder.uk/makitahs013g
Makita VC006GM M-Class Dust Extractor go.skill-builder.uk/makitavc006gm
KEY TAKEAWAYS
- The 270mm blade goes straight through a big structural beam in one pass, so there's no flipping the timber over and no nib left in the middle of the cut
- The weight works in your favour on a saw this size, because it lets the blade glide through instead of tempting you to push it the way you would with a small saw
- The magnesium base kept the cut square straight out of the box, which isn't a given at this blade diameter
- A 45 degree bevel at full depth is something a 165mm saw simply can't reach
- A 150mm deep rip cut is achievable, but the big blade behaves like a ruler and won't let you micro adjust once you're on the line
- Soft start, an electronic brake and anti-stall all matter more at this size, and the exit side of the cut is where the real danger sits
- The VC006GM runs on two 40V XGT batteries for 80V of extraction, close to a mains machine, though it'll get through batteries on all day use
- AWS Bluetooth fires the extractor off the saw trigger, so it only runs while you're cutting and saves battery
- With extraction hooked up you can see the cut line properly, which on a saw this big is the difference between following your line and hoping
WATCH NEXT
Makita's Best Kept Secret: The DCE090 Cut-Off Saw youtu.be/gfoT7ywbkWk
Milwaukee Rear Handle Circular Saw for Wood youtu.be/G-TZmppFD-k
Makita DSP600 36v Cordless Plunge Saw youtu.be/JriRMW9jEao
CHAPTERS
00:00 The world's biggest cordless circular saw
00:40 Build quality, magnesium base and depth adjustment
01:20 XGT batteries, AWS and the safety features
02:20 First deep cross cut through a structural beam
03:20 Checking it for square
03:50 45 degree bevel at full depth
04:30 The 150mm deep rip cut
05:30 Plunge cut and a slice of ship's mahogany
06:20 The VC006GM M-class cordless dust extractor
07:40 Power modes and battery life
08:30 Cutting with extraction and seeing the line
09:40 Who this saw is actually for
Which tool would you like us to put through its paces next? Let us know in the comments.
#MakitaXGT #CircularSaw #Carpentry #SkillBuilder










