Uploaded June 2022 | Updated November 2026, 3 hours ago
We did what the people wanted to see, we turbo’d the Rotary-powered ATV! We used a draw through setup with a 34mm Mikuni from GoPowerSports, and a VZ21 small turbo. The end results speak for itself, the turbo made a big difference! Next up we need to make this thing look good cosmetically and then take it for a proper on and off-road test.
Thanks for watching and stay tuned for the next video!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only**
PARTS LINKS BELOW! | Build Break Repeat is Proudly Sponsored by GoPowerSports and Hobart Welders
TURBO CHARGER – Affiliate Link
amzn.to/3aWkZSB
GPS PARTS:
34MM MIKUNI – gopowersports.com/34mm-mikuni-carburetor/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Oil Reservoir - gopowersports.com/aluminum-catch-tank/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Battery – gopowersports.com/12-volt-9-amp-sealed-battery-chrome-7l-bs-yb9l-b-sealed/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driven pulley - gopowersports.com/780-driven-pulley-3-4-bore-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driver pulley - gopowersports.com/780-driver-clutch-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft Brackets - gopowersports.com/adjustable-jackshaft-brackets-weld-on/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft - gopowersports.com/3-4-jackshaft-not-threaded-19-long/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Sprocket - gopowersports.com/jackshaft-sprocket-type-b-420-3-4-bore/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Locking Collar - gopowersports.com/jackshaft-lock-collar-3-4/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
1” Lock Collars - gopowersports.com/bearing-3-4-1-3-8od/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
¼” Keystock - gopowersports.com/key-1-4-x-1-1-4-long-6123/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
AMAZON AFFILIATE PARTS:
TURBO CHARGER - amzn.to/3aWkZSB
Oil pump - amzn.to/3xIDYZI
Turbo Flanges - amzn.to/3xu2FIe
Exhaust Bend (1.5”) - amzn.to/3MDbiFK
Jets - amzn.to/3tv7Mq2, amzn.to/39e4znZ, amzn.to/3aPyeV0
Comet 94C 30mm 1:10 taper driver pulley - amzn.to/3GSmU6l
Brake Master Cylinder - amzn.to/3x5tLFf
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
--------------TOOLS -------------
Tools we use and have received from sponsors:
HOBART Welding Equipment
hobartwelders.com
Texas Metalworks 40x80 Welding Table
texasmetalworks.com/product/fully-fabricated-welding-table
RogueFab Tubing Bender
roguefab.com/product/metal-tube-bender-m601-1-die/#bender
RogueFab Tubing Notcher
roguefab.com/product/versanotcher-universal-tubing-notcher
SWAG Offroad PortaBand Table
swagoffroad.com/products/swag-portaband-pro-table
Optrel Crystal 2.0 Welding Mask
usa.optrel.com/en/eye_protection_helmets/products/show/crystal20
Optrel Grinding Mask
usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx
----------MUSIC ---------
Intro and Outro Song - Jimmi by Andrew Applepie
youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
----SOCIAL MEDIA-----
CHECK OUT OUR INSTAGRAM! instagram.com/build.break.repeat?igshid=ulwwhmio96an
---------MERCH----------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/stores/build-break-repeat
We did what the people wanted to see, we turbo’d the Rotary-powered ATV! We used a draw through setup with a 34mm Mikuni from GoPowerSports, and a VZ21 small turbo. The end results speak for itself, the turbo made a big difference! Next up we need to make this thing look good cosmetically and then take it for a proper on and off-road test.
Thanks for watching and stay tuned for the next video!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only**
PARTS LINKS BELOW! | Build Break Repeat is Proudly Sponsored by GoPowerSports and Hobart Welders
TURBO CHARGER – Affiliate Link
amzn.to/3aWkZSB
GPS PARTS:
34MM MIKUNI – gopowersports.com/34mm-mikuni-carburetor/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Oil Reservoir - gopowersports.com/aluminum-catch-tank/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Battery – gopowersports.com/12-volt-9-amp-sealed-battery-chrome-7l-bs-yb9l-b-sealed/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driven pulley - gopowersports.com/780-driven-pulley-3-4-bore-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driver pulley - gopowersports.com/780-driver-clutch-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft Brackets - gopowersports.com/adjustable-jackshaft-brackets-weld-on/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft - gopowersports.com/3-4-jackshaft-not-threaded-19-long/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Sprocket - gopowersports.com/jackshaft-sprocket-type-b-420-3-4-bore/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Locking Collar - gopowersports.com/jackshaft-lock-collar-3-4/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
1” Lock Collars - gopowersports.com/bearing-3-4-1-3-8od/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
¼” Keystock - gopowersports.com/key-1-4-x-1-1-4-long-6123/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
AMAZON AFFILIATE PARTS:
TURBO CHARGER - amzn.to/3aWkZSB
Oil pump - amzn.to/3xIDYZI
Turbo Flanges - amzn.to/3xu2FIe
Exhaust Bend (1.5”) - amzn.to/3MDbiFK
Jets - amzn.to/3tv7Mq2, amzn.to/39e4znZ, amzn.to/3aPyeV0
Comet 94C 30mm 1:10 taper driver pulley - amzn.to/3GSmU6l
Brake Master Cylinder - amzn.to/3x5tLFf
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
--------------TOOLS -------------
Tools we use and have received from sponsors:
HOBART Welding Equipment
hobartwelders.com
Texas Metalworks 40x80 Welding Table
texasmetalworks.com/product/fully-fabricated-welding-table
RogueFab Tubing Bender
roguefab.com/product/metal-tube-bender-m601-1-die/#bender
RogueFab Tubing Notcher
roguefab.com/product/versanotcher-universal-tubing-notcher
SWAG Offroad PortaBand Table
swagoffroad.com/products/swag-portaband-pro-table
Optrel Crystal 2.0 Welding Mask
usa.optrel.com/en/eye_protection_helmets/products/show/crystal20
Optrel Grinding Mask
usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx
----------MUSIC ---------
Intro and Outro Song - Jimmi by Andrew Applepie
youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
----SOCIAL MEDIA-----
CHECK OUT OUR INSTAGRAM! instagram.com/build.break.repeat?igshid=ulwwhmio96an
---------MERCH----------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/stores/build-break-repeat










