Uploaded May 2026 | Updated November 2026, 3 hours ago
In today’s video, we’ll be using the Monport Effi9s 90W CO2 Laser Engraver to create a custom laser cut layered lantern. In order to create this LED lit lantern, we’ll be using opaque, transparent, and glow-in the dark acrylic as well as chipboard. Also, to create the design for this decorative project, we’ll be using LightBurn. I hope you enjoy the video! #monportlaser #co2laserengraving #lasercutting
⚡️FOR 10% OFF your purchase of this machine and Monport Lasers USE DISCOUNT CODE: Anonymous10 ⚡️
Link to the Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
⭐️Details on the Laser⭐️
Monport Effi9S Upgraded 90W CO2 Laser Engraver & Cutter with Autofocus and Built-in Water Chiller
Rated Power: 90W
Max. Engraving Speed: 1400mm/s(55.1ips)
Engraving Area: 900 x 600mm(36 x 24 in.)
Focus Mode: Autofocus
Compatible Operating Systems: Windows / macOS
Compatible Software: LightBurn & RDworks
Cooling system: Built in CW5200 water chiller
Fume Exhaust: 550W Duct Fan,1125 m³/h
🎬 PRODUCT LINKS🎬
Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
LightBurn Camera: youtube.com/watch?v=meQNmb6nCNc&list=PLtQ8IvTMaEGILLP4LmQQXAzrfMQZgdu2g&index=3
Monport Effi9s 90W Videos: youtube.com/playlist?list=PLtQ8IvTMaEGILLP4LmQQXAzrfMQZgdu2g
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
⏱TIMESTAMPS⏱
0:00 Intro
0:23 Materials
0:44 Creating Design
6:25 Laser Cutting Plywood
7:13 Laser Cutting Acrylic
8:09 Painting the Chipboard
8:46 Gluing the Lid
9:16 Adding Lights
11:51 Assembling
15:10 Results
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2026 - All Rights Reserved
🎶MUSIC🎶
Far Away - MK2
Special - The Grey Room _ Clark Sims
The Current Blues - Freedom Trail Studio
Standoff - Density & Time
Reasons - Anno Domini Beats
Defying Gravity - Density & Time
Boomin' - Dan
In today’s video, we’ll be using the Monport Effi9s 90W CO2 Laser Engraver to create a custom laser cut layered lantern. In order to create this LED lit lantern, we’ll be using opaque, transparent, and glow-in the dark acrylic as well as chipboard. Also, to create the design for this decorative project, we’ll be using LightBurn. I hope you enjoy the video! #monportlaser #co2laserengraving #lasercutting
⚡️FOR 10% OFF your purchase of this machine and Monport Lasers USE DISCOUNT CODE: Anonymous10 ⚡️
Link to the Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
⭐️Details on the Laser⭐️
Monport Effi9S Upgraded 90W CO2 Laser Engraver & Cutter with Autofocus and Built-in Water Chiller
Rated Power: 90W
Max. Engraving Speed: 1400mm/s(55.1ips)
Engraving Area: 900 x 600mm(36 x 24 in.)
Focus Mode: Autofocus
Compatible Operating Systems: Windows / macOS
Compatible Software: LightBurn & RDworks
Cooling system: Built in CW5200 water chiller
Fume Exhaust: 550W Duct Fan,1125 m³/h
🎬 PRODUCT LINKS🎬
Monport Effi9S 90w Laser Engraver: bit.ly/3Tk827Z
💻SOFTWARE💻
LightBurn
🎬VIDEO LINKS🎬
LightBurn Camera: youtube.com/watch?v=meQNmb6nCNc&list=PLtQ8IvTMaEGILLP4LmQQXAzrfMQZgdu2g&index=3
Monport Effi9s 90W Videos: youtube.com/playlist?list=PLtQ8IvTMaEGILLP4LmQQXAzrfMQZgdu2g
Laser Engraving Playlist: youtube.com/playlist?list=PLtQ8IvTMaEGJFCRSP4pdpbl_FxbjcTa7g
⏱TIMESTAMPS⏱
0:00 Intro
0:23 Materials
0:44 Creating Design
6:25 Laser Cutting Plywood
7:13 Laser Cutting Acrylic
8:09 Painting the Chipboard
8:46 Gluing the Lid
9:16 Adding Lights
11:51 Assembling
15:10 Results
⚠️Disclaimer: We receive some products at no cost from brands/advertisers, however, the review, experiences and opinions reflected in our content are our own. Our description may contain affiliate links and codes that may help us earn a small commission from qualifying purchases. We appreciate the support of our channel to continue to bring our viewers new content. The projects/products included on this channel come with potential risks and you are solely responsible for your safety, risk assessment and property. The content and information provided by this channel is for general information and entertainment purposes only and should not be treated as professional advice. Your use of the site is solely at your own risk. ©Project Anonymous 2026 - All Rights Reserved
🎶MUSIC🎶
Far Away - MK2
Special - The Grey Room _ Clark Sims
The Current Blues - Freedom Trail Studio
Standoff - Density & Time
Reasons - Anno Domini Beats
Defying Gravity - Density & Time
Boomin' - Dan










