We 3D printed a WORKING 1800s Lighthouse ⚓️✨ #3dprinting #engineering @Formlabs
We 3D printed a WORKING 1800s Lighthouse ⚓️✨ #3dprinting #engineering  @Formlabs
Uploaded August 2026 | Updated November 2026, 5 days ago
We made an 1800s lighthouse lantern, and it works.

This is a functional 6th-order Fresnel lens replica, the smallest size used in real 19th and 20th century lighthouses. The entire design was 3D printed on the Formlabs Form 4 print ecosystem.

The lenses and catadioptric prisms are printed in Formlabs Clear V5. To get the optical clarity required to properly refract light, we wet-sanded every part to remove layer lines and finished them with a buffing process to achieve a glass-like finish.

The structural frame is printed in Formlabs Black V5, and the gears are printed in Tough 2000 V2, chosen for its high stiffness and creep resistance to support the weight of the solid resin lenses.

Everything is entirely custom-designed in CAD (Onshape). The refraction angles were manually calculated and ray traced for each individual prism so the light perfectly collimates into a horizontal beam.

Because a 6th-order lens is still quite large, the frame was designed to print in several pieces and assemble with dovetail joints.

It actually spins using a 12V DC gear motor with a 6:1 gear reduction system, rotating the lens at around 6 RPM on a lazy susan bearing. The mechanism is friction-driven, so the center of the base stays completely hollow, letting a stationary 12W dimmable vintage Edison bulb sit inside.

The lens takes the expanding light from the bulb and compresses it into a highly focused horizontal beam, creating that classic lighthouse "loom" sweeping across the room.
We 3D printed a WORKING 1800s Lighthouse ⚓️✨ #3dprinting #engineeringSUPER LONG 3D Printed Chain Fountain 50M LONG!Custom Textures & Displacement Maps for 3D PrintsCreating a silicone mold with SLA 3D printing.Silicone Casting with SLA Molds and Formlabs Form 4Material Scientist Answers Most Asked Resin Safety Questions3D printing of a patient-specific aortic dissection modelThis is How Lightcraft Changed The Way To Build Drones3D Printing for Automotive Production: How Brose Leverages SLA and SLS TechnologySLS 3D Printing: Intricate Designs & Sustainable Material Recycling!Strong, Flexible 3D Printing ResinHow They Recreated Jaws Most Famous Prop in 30 Days
Formlabs |

We 3D printed a WORKING 1800s Lighthouse ⚓️✨ #3dprinting #engineering

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER