Uploaded November 2026 | Updated November 2026, 3 hours ago
Have you ever wondered how much work goes into providing you with water? That is safe, potable water. Technically you could drink any water but that would lead to a very quick turn around time with either a surge in hospital admissions or death.
So if we are talking about safe water things are very different and somewhat complicated.
First most water is not from a contained, secure source. It is going to be an exposed source such as a lake, river, reservoir, or similar. That is a place where fish, birds and animals get in to the water. Plant matter, organic debris and water get in the water. Worst is environmental toxins and hazards.
These are the first thing you need to remove or at least filter in fresh water. In theory removing all the larger contaminants but not microbial organisms, toxins, and other small contaminants.
Now you need to remove the small inorganic contaminants. This is done with a technique called flocculation.
Now the water is filtered. This should now remove most of the remaining small contaminants. Whether it is microbial organisms, toxins, or other material. Most but not all.
Further treatment will include ozone, ultra violet light, chlorine gas and more. These treatments kill any residual micro organisms.
Last treatments may be added to the water. A common example is fluoride for dental health.
This is great if you have accesses to ample fresh water but most major cities are not so lucky or at least not lucky enough. This is where and why desalination is attractive.
Desalination is making salt water potable for human consumption. This is more often than not sea water but other sources can also be used such as overly rich spring water, other water sources with high solute concentrations.
The process is largely similar to start. Removing large contamination, Smaller contamination, Treating for microbes. After all fo this there is an extra step.
Separation of water from salt. An energy intensive process. A very energy intensive process.
It is this part that makes desalination a challenge. If you need to put more energy into the production of water than you get from selling water it is charity not a business. Fortunately 2 options exist.
Option one is a membrane. It is literally a big filter with an ultra fine structure that requires pressure top push water through. Simple in theory but complex in practice.
Option two is thermal. Simply put boiling water. At a small scale very simple. At large scale very complex. Lots energy, lots of heat, and lots very hot gas to handle.
Have you ever wondered how much work goes into providing you with water? That is safe, potable water. Technically you could drink any water but that would lead to a very quick turn around time with either a surge in hospital admissions or death.
So if we are talking about safe water things are very different and somewhat complicated.
First most water is not from a contained, secure source. It is going to be an exposed source such as a lake, river, reservoir, or similar. That is a place where fish, birds and animals get in to the water. Plant matter, organic debris and water get in the water. Worst is environmental toxins and hazards.
These are the first thing you need to remove or at least filter in fresh water. In theory removing all the larger contaminants but not microbial organisms, toxins, and other small contaminants.
Now you need to remove the small inorganic contaminants. This is done with a technique called flocculation.
Now the water is filtered. This should now remove most of the remaining small contaminants. Whether it is microbial organisms, toxins, or other material. Most but not all.
Further treatment will include ozone, ultra violet light, chlorine gas and more. These treatments kill any residual micro organisms.
Last treatments may be added to the water. A common example is fluoride for dental health.
This is great if you have accesses to ample fresh water but most major cities are not so lucky or at least not lucky enough. This is where and why desalination is attractive.
Desalination is making salt water potable for human consumption. This is more often than not sea water but other sources can also be used such as overly rich spring water, other water sources with high solute concentrations.
The process is largely similar to start. Removing large contamination, Smaller contamination, Treating for microbes. After all fo this there is an extra step.
Separation of water from salt. An energy intensive process. A very energy intensive process.
It is this part that makes desalination a challenge. If you need to put more energy into the production of water than you get from selling water it is charity not a business. Fortunately 2 options exist.
Option one is a membrane. It is literally a big filter with an ultra fine structure that requires pressure top push water through. Simple in theory but complex in practice.
Option two is thermal. Simply put boiling water. At a small scale very simple. At large scale very complex. Lots energy, lots of heat, and lots very hot gas to handle.










