Uploaded October 2015 | Updated November 2026, 4 days ago
This is a tutorial to show an option to save money for your standing desk's top surface. Learn how to save money building your own DIY Standing Desk.
For more info, project photos, and promotional code check out:
diypete.com/StandingDesk
Standing Desk Supplementary Video (Shows UPLIFT 900 Assembly and Interview with Stand Modern): youtu.be/KmrZl5wbPQ8
UPLIFT Desk® Features:
Maximum Weight 355 Pounds
Desktop 43" to 96" wide
26 inches of height adjustment 23.5 to 49.5
4 programmable height presets and digital desk height readout
7-year all-inclusive warranty on the entire desk base
*Tools & Supplies Needed
*Note that these are affiliate links, meaning that when you buy something that is recommended below, it helps support the Channel. Thanks in advance!
*Drill - amzn.to/1Hb6HTe
*Orbital Sander - amzn.to/1Hb6LlX
*Table Saw - amzn.to/1RBwucJ
*1 pack of 3/4 inch screws - amzn.to/1NAK9Qx
*Wood Glue - amzn.to/1Hb6SOm
*Lacquer - amzn.to/1RBwycu
*Electronic UPLIFT 900 Standing Desk Base purchased at Stand Modern - bit.ly/1P51u5X
Birch or Maple Plywood top - $75 3/4 inch sheet laminated to a 1/4 inch sheet for a total thickness of 1 inch
Need more tool recommendations or curious about the tools I trust and use in my builds? Visit my Amazon Store to find everything I recommend for DIY projects big and small! amazon.com/shop/petesveen?ref_=cm_sw_r_cp_ud_aipsfshop_2HRAJ4RJR0J89C2ST1F4
Purchase and Assemble the Base
The first step of building your DIY Standing Desk is to find decide on a base for the desk. Some of the best quality and most affordable standing desks I've found can be ordered here: bit.ly/1P51u5X I got the Uplift 900 standing desk base frame for my project. Assemble the base, refer to this extra video we put together for help assembling the base.
Make Your Cuts
Determine the width, depth, and thickness for your desktop. I'd recommend a minimum thickness of 1 inch. 3/4 of an inch may work, but adding a little extra thickness will make your table stronger. I made my table 1 inch thick by laminating a sheet of 3/4 inch birch plywood to a 1/4 inch thick piece of birch plywood. On the table saw, we cut our boards to size. The final size of my DIY standing desk ended up being 78" long by 30" wide by 1" thick.
Build Your Custom Desktop
Once all of your boards for your desktop are cut, its time to laminate the 3/4" plywood to the 1/4" piece. Add plenty of wood glue during this process, focusing special attention on the edges and corners. Screw it together from the underside using 3/4" screws. Add clamps and let the glue dry for the manufacturers recommended time.
Sand the Desktop
Give your desktop a once over with 220 grit sandpaper and your orbital sander. Take extra time to ease the edges and corners, making it as smooth as you'd like. Then work your way down through 320, 400, & 600 grit sandpaper. Prep everything for finishing and wipe any dust off with a tack cloth or a slightly damp microfiber cloth.
Finish the Desktop with Lacquer
For my DIY Standing Desk, I wanted a slightly glossy finish with a durable surface. I find that lacquer protects better than polyurethane and chose to use lacquer for this project. Apply one coat of lacquer and let it dry. Then wet-sand it with 600 grit sandpaper before the next coat. I go over a special wet-sanding technique in the video that works great for smoothing out any finish. Then add a second coat of lacquer (you could keep adding more coats if desired) and let it cure. Do a very light wet-sanding with 800 after your coats and then buff out the finish with a microfiber cloth. This method provides for a great, durable finish.
Attach the UPLIFT 900 Base
After your desktop for your DIY standing desk has finished curing, you're ready to install the sit - stand base! In the video, we go over attaching the UPLIFT 900 base, it really is an easy process. The base comes with all of the hardware you'll need to attach it to your custom desktop. Be sure to pre-drill any holes before adding screws. Attach the base and then stand the desk upright. I screwed out a 2" spot for grommet hole mounts so my computer wires would be more hidden.
----
Looking for more DIY videos? Be sure to check out our channel and subscribe for updates!
Looking for woodworking, concrete working, and other DIY projects plans to follow? You can download plans for free at gumroad.com/DIYPETE and premium plans at: diypete.com/diy-project-plans
Facebook: facebook.com/DiyProjectsWithPete
Instagram: instagram.com/diypete
DIYPETE.com
1627 W Main Street Suite 182
Bozeman, Montana 59715
#standingdesk #diydesk #desksetup
This is a tutorial to show an option to save money for your standing desk's top surface. Learn how to save money building your own DIY Standing Desk.
For more info, project photos, and promotional code check out:
diypete.com/StandingDesk
Standing Desk Supplementary Video (Shows UPLIFT 900 Assembly and Interview with Stand Modern): youtu.be/KmrZl5wbPQ8
UPLIFT Desk® Features:
Maximum Weight 355 Pounds
Desktop 43" to 96" wide
26 inches of height adjustment 23.5 to 49.5
4 programmable height presets and digital desk height readout
7-year all-inclusive warranty on the entire desk base
*Tools & Supplies Needed
*Note that these are affiliate links, meaning that when you buy something that is recommended below, it helps support the Channel. Thanks in advance!
*Drill - amzn.to/1Hb6HTe
*Orbital Sander - amzn.to/1Hb6LlX
*Table Saw - amzn.to/1RBwucJ
*1 pack of 3/4 inch screws - amzn.to/1NAK9Qx
*Wood Glue - amzn.to/1Hb6SOm
*Lacquer - amzn.to/1RBwycu
*Electronic UPLIFT 900 Standing Desk Base purchased at Stand Modern - bit.ly/1P51u5X
Birch or Maple Plywood top - $75 3/4 inch sheet laminated to a 1/4 inch sheet for a total thickness of 1 inch
Need more tool recommendations or curious about the tools I trust and use in my builds? Visit my Amazon Store to find everything I recommend for DIY projects big and small! amazon.com/shop/petesveen?ref_=cm_sw_r_cp_ud_aipsfshop_2HRAJ4RJR0J89C2ST1F4
Purchase and Assemble the Base
The first step of building your DIY Standing Desk is to find decide on a base for the desk. Some of the best quality and most affordable standing desks I've found can be ordered here: bit.ly/1P51u5X I got the Uplift 900 standing desk base frame for my project. Assemble the base, refer to this extra video we put together for help assembling the base.
Make Your Cuts
Determine the width, depth, and thickness for your desktop. I'd recommend a minimum thickness of 1 inch. 3/4 of an inch may work, but adding a little extra thickness will make your table stronger. I made my table 1 inch thick by laminating a sheet of 3/4 inch birch plywood to a 1/4 inch thick piece of birch plywood. On the table saw, we cut our boards to size. The final size of my DIY standing desk ended up being 78" long by 30" wide by 1" thick.
Build Your Custom Desktop
Once all of your boards for your desktop are cut, its time to laminate the 3/4" plywood to the 1/4" piece. Add plenty of wood glue during this process, focusing special attention on the edges and corners. Screw it together from the underside using 3/4" screws. Add clamps and let the glue dry for the manufacturers recommended time.
Sand the Desktop
Give your desktop a once over with 220 grit sandpaper and your orbital sander. Take extra time to ease the edges and corners, making it as smooth as you'd like. Then work your way down through 320, 400, & 600 grit sandpaper. Prep everything for finishing and wipe any dust off with a tack cloth or a slightly damp microfiber cloth.
Finish the Desktop with Lacquer
For my DIY Standing Desk, I wanted a slightly glossy finish with a durable surface. I find that lacquer protects better than polyurethane and chose to use lacquer for this project. Apply one coat of lacquer and let it dry. Then wet-sand it with 600 grit sandpaper before the next coat. I go over a special wet-sanding technique in the video that works great for smoothing out any finish. Then add a second coat of lacquer (you could keep adding more coats if desired) and let it cure. Do a very light wet-sanding with 800 after your coats and then buff out the finish with a microfiber cloth. This method provides for a great, durable finish.
Attach the UPLIFT 900 Base
After your desktop for your DIY standing desk has finished curing, you're ready to install the sit - stand base! In the video, we go over attaching the UPLIFT 900 base, it really is an easy process. The base comes with all of the hardware you'll need to attach it to your custom desktop. Be sure to pre-drill any holes before adding screws. Attach the base and then stand the desk upright. I screwed out a 2" spot for grommet hole mounts so my computer wires would be more hidden.
----
Looking for more DIY videos? Be sure to check out our channel and subscribe for updates!
Looking for woodworking, concrete working, and other DIY projects plans to follow? You can download plans for free at gumroad.com/DIYPETE and premium plans at: diypete.com/diy-project-plans
Facebook: facebook.com/DiyProjectsWithPete
Instagram: instagram.com/diypete
DIYPETE.com
1627 W Main Street Suite 182
Bozeman, Montana 59715
#standingdesk #diydesk #desksetup










