Uploaded March 2023 | Updated November 2026, 3 hours ago
How to restore a steel watch case with Polished + Brushed surfaces!
1970's Heuer Dive Watch w/ stainless steel case - this is my first watch case polishing and brush matte finish restoration. The challenge on this project was how to apply a concentric circular brush pattern evenly across the top face of the watch, but keep the polished surfaces mirror-shiny. My solution is simple but may surprise you!
After giving the watch case and back as close to a mirror finish as I could, I masked the parts of the case that I wanted to remain shiny with heat-resistant tape, which has good tack but leaves no residue. Then I attached the case to a turntable and applied the ‘brush’ with a green 3M abrasive pad.
This is also the first time I used my new hobby buffer on a watch case. It worked great!
Please subscribe for lots more watch repair DIY videos.
Follow me on Instagram: @watch.with.mike
Please also check out my Auto | Home | Technology YouTube channel: @MikeFYXDT
-------------------------------------------------------------
Watchmaking tools and supplies used in this video (Amazon Associate product links):
Jewelry Mini Buffer Kit amzn.to/3WFoyyR
3'' Cotton Polishing Wheels for 3/8'' Arbor amzn.to/3ZNlAuO
Polishing Buffing Compound Kit amzn.to/44wUrgX
Magnasonic Ultrasonic Cleaner - 600 ml amzn.to/3XEp4xb
144 Clear Cabinet & Furniture Bumpers amzn.to/3YNXsGU
Heat Resistant Tape - 10mm (2 rolls) amzn.to/3JQ7DGC
Index:
00:00 Case “Before” Refinishing
02:12 Buffing & Polishing
06:58 Buffer Mods & Tips
07:51 Ultrasonic Cleaning
08:27 Mask Before Brush Finishing
11:46 Radial Pattern Secret Weapon!
13:24 Applying the Brushed Finish
16:04 Unmasking the Watch Case
16:22 Finished Watch Case Reveal
#watchrepair #watchrestoration #watchwithmike
How to restore a steel watch case with Polished + Brushed surfaces!
1970's Heuer Dive Watch w/ stainless steel case - this is my first watch case polishing and brush matte finish restoration. The challenge on this project was how to apply a concentric circular brush pattern evenly across the top face of the watch, but keep the polished surfaces mirror-shiny. My solution is simple but may surprise you!
After giving the watch case and back as close to a mirror finish as I could, I masked the parts of the case that I wanted to remain shiny with heat-resistant tape, which has good tack but leaves no residue. Then I attached the case to a turntable and applied the ‘brush’ with a green 3M abrasive pad.
This is also the first time I used my new hobby buffer on a watch case. It worked great!
Please subscribe for lots more watch repair DIY videos.
Follow me on Instagram: @watch.with.mike
Please also check out my Auto | Home | Technology YouTube channel: @MikeFYXDT
-------------------------------------------------------------
Watchmaking tools and supplies used in this video (Amazon Associate product links):
Jewelry Mini Buffer Kit amzn.to/3WFoyyR
3'' Cotton Polishing Wheels for 3/8'' Arbor amzn.to/3ZNlAuO
Polishing Buffing Compound Kit amzn.to/44wUrgX
Magnasonic Ultrasonic Cleaner - 600 ml amzn.to/3XEp4xb
144 Clear Cabinet & Furniture Bumpers amzn.to/3YNXsGU
Heat Resistant Tape - 10mm (2 rolls) amzn.to/3JQ7DGC
Index:
00:00 Case “Before” Refinishing
02:12 Buffing & Polishing
06:58 Buffer Mods & Tips
07:51 Ultrasonic Cleaning
08:27 Mask Before Brush Finishing
11:46 Radial Pattern Secret Weapon!
13:24 Applying the Brushed Finish
16:04 Unmasking the Watch Case
16:22 Finished Watch Case Reveal
#watchrepair #watchrestoration #watchwithmike

