Uploaded July 2024 | Updated November 2026, 5 hours ago
A work in progress that -spiraled out of control- became a proof of concept, this demonstrates just how far you can take War Thunder's stock base engine sounds when it comes to making a dynamic, authentic end result. Note that I didn't even use the actual cockpit sounds, just the four "side" sounds with the FMOD reverb effect.
I also augmented the sound at high RPM with samples from in-flight videos (linked below), and added an extra sample at low RPM. Accordingly, I showed the difference without the extra sounds at high RPM. And this is all before incorporating the actual cockpit sounds, wind noises, accounting for two engines... it's still a big improvement IMO.
One of the most significant shortcomings of the stock cockpit sounds is the lack of pitch matching and smooth transitions between the different RPM samples. Here, I'm pretty satisfied with how even the Everts video samples pitch matched quite well. The RPM parameter corresponds to actual engine RPM, at least as close as I can get it based on various R-2800 videos and my experience.
As you can see, I'm using the built-in FMOD Engine Designer script to control the RPM parameter, which automatically smooths your input and moves the "load" parameter accordingly based on "engine" acceleration. I have a simple EQ effect tied to "load," which low/high passes the sound on load and unload respectively. It's not exactly accurate, obviously, but it's not like War Thunder has a separate parameter for manifold pressure (or actual RPM) anyway.
You'll notice during the "run-up" sequence, I found that a simple EQ highshelf makes for a pretty good impression of the way the prop sound changes when the blades move to high pitch/low RPM in real life. Unfortunately, War Thunder doesn't have an FMOD parameter to represent blade angle at the moment.
And if you're wondering why War Thunder has C-46 sounds - they're used on some Japanese twin-engined aircraft, like the Ki-83.
0:00 Startup
0:32 Idle
0:53 Runup prop cycles
1:45 Runup mag check
2:30 Takeoff
3:37 Climb
3:56 Cruise
4:03 Stock sounds only
4:50 YouTube samples only
5:30 VROOM VROOM
Videos sampled:
youtube.com/watch?v=sMvV1_a9WVs
youtube.com/watch?v=kbbZaH2ZtU8
A video of the C-46 War Thunder's sounds were recorded from!
youtube.com/watch?v=HzMFOnTEXAA
A work in progress that -spiraled out of control- became a proof of concept, this demonstrates just how far you can take War Thunder's stock base engine sounds when it comes to making a dynamic, authentic end result. Note that I didn't even use the actual cockpit sounds, just the four "side" sounds with the FMOD reverb effect.
I also augmented the sound at high RPM with samples from in-flight videos (linked below), and added an extra sample at low RPM. Accordingly, I showed the difference without the extra sounds at high RPM. And this is all before incorporating the actual cockpit sounds, wind noises, accounting for two engines... it's still a big improvement IMO.
One of the most significant shortcomings of the stock cockpit sounds is the lack of pitch matching and smooth transitions between the different RPM samples. Here, I'm pretty satisfied with how even the Everts video samples pitch matched quite well. The RPM parameter corresponds to actual engine RPM, at least as close as I can get it based on various R-2800 videos and my experience.
As you can see, I'm using the built-in FMOD Engine Designer script to control the RPM parameter, which automatically smooths your input and moves the "load" parameter accordingly based on "engine" acceleration. I have a simple EQ effect tied to "load," which low/high passes the sound on load and unload respectively. It's not exactly accurate, obviously, but it's not like War Thunder has a separate parameter for manifold pressure (or actual RPM) anyway.
You'll notice during the "run-up" sequence, I found that a simple EQ highshelf makes for a pretty good impression of the way the prop sound changes when the blades move to high pitch/low RPM in real life. Unfortunately, War Thunder doesn't have an FMOD parameter to represent blade angle at the moment.
And if you're wondering why War Thunder has C-46 sounds - they're used on some Japanese twin-engined aircraft, like the Ki-83.
0:00 Startup
0:32 Idle
0:53 Runup prop cycles
1:45 Runup mag check
2:30 Takeoff
3:37 Climb
3:56 Cruise
4:03 Stock sounds only
4:50 YouTube samples only
5:30 VROOM VROOM
Videos sampled:
youtube.com/watch?v=sMvV1_a9WVs
youtube.com/watch?v=kbbZaH2ZtU8
A video of the C-46 War Thunder's sounds were recorded from!
youtube.com/watch?v=HzMFOnTEXAA










