Uploaded November 2021 | Updated September 2026, 2 weeks ago
The new Control Pro 130 Power Tank is ideal for big interior and exterior jobs and can be used with a wide range of unthinned paints and stains. It takes the intimidation out of airless spraying with fast and easy set up and unmatched control, all while delivering continuous painting and fast coverage. The Control Pro 130 is perfect for painting the exterior of your home, staining a large deck, and more.
It is gravity fed for fast, no mess priming and cleaning. The spray gun also features High Efficiency Airless technology that creates soft fan pattern edges so you can achieve a smooth, consistent finish without splatter or gaps.
This Wagner airless paint sprayer produces up to 55% less overspray than traditional airless sprayers which means easier preparation, quick clean up, and less paint or stain used.
Learn more about the Control Pro 130 on our website:
wagnerspraytech.com/products/paint-sprayers/pro-130-hea
How to Clean Up & Store the Wagner Control Pro 130 Paint Sprayer
Pressure Relief Procedure:
-Turn prime/spray knob to prime position
-Power on the CP 130
-Reverse the sprayer tip, unlock the spray gun, pull trigger into an empty bucket to relieve system
-Power off the CP 130
Disassembly:
-Remove guard and sprayer tip, then place in soap & warm water
-Empty any remaining paint back into its paint bucket
-Clean the inside of the hopper with soap & water
-Do not spray the unit, or the cord connection with water
-Power on the CP 130
-Pull the trigger into a bucket until water runs clear
-Run pump and continue to flush until clean
-Power off the CP 130
-Turn prime/spray knob to spray position
Final Disassembly:
-Disconnect paint spray gun from hose
-Disconnect hose from unit
-Wipe connection points if needed
-Add a little Titan Pump Shield or household oil such as 3-in-1 oil
-Do not use cooking oils, motor oils, or solvents such as WD-40
-Coil hose and store in unit
Plan about 20 minutes for a thorough clean up
The new Control Pro 130 Power Tank is ideal for big interior and exterior jobs and can be used with a wide range of unthinned paints and stains. It takes the intimidation out of airless spraying with fast and easy set up and unmatched control, all while delivering continuous painting and fast coverage. The Control Pro 130 is perfect for painting the exterior of your home, staining a large deck, and more.
It is gravity fed for fast, no mess priming and cleaning. The spray gun also features High Efficiency Airless technology that creates soft fan pattern edges so you can achieve a smooth, consistent finish without splatter or gaps.
This Wagner airless paint sprayer produces up to 55% less overspray than traditional airless sprayers which means easier preparation, quick clean up, and less paint or stain used.
Learn more about the Control Pro 130 on our website:
wagnerspraytech.com/products/paint-sprayers/pro-130-hea
How to Clean Up & Store the Wagner Control Pro 130 Paint Sprayer
Pressure Relief Procedure:
-Turn prime/spray knob to prime position
-Power on the CP 130
-Reverse the sprayer tip, unlock the spray gun, pull trigger into an empty bucket to relieve system
-Power off the CP 130
Disassembly:
-Remove guard and sprayer tip, then place in soap & warm water
-Empty any remaining paint back into its paint bucket
-Clean the inside of the hopper with soap & water
-Do not spray the unit, or the cord connection with water
-Power on the CP 130
-Pull the trigger into a bucket until water runs clear
-Run pump and continue to flush until clean
-Power off the CP 130
-Turn prime/spray knob to spray position
Final Disassembly:
-Disconnect paint spray gun from hose
-Disconnect hose from unit
-Wipe connection points if needed
-Add a little Titan Pump Shield or household oil such as 3-in-1 oil
-Do not use cooking oils, motor oils, or solvents such as WD-40
-Coil hose and store in unit
Plan about 20 minutes for a thorough clean up
