In this video we dive into calibrating flow per material for your 3d printer. This is an important process if you want to ensure you dont have under or overextrusion. The process is fairly simple and we go step by step how to use OrcaSlicers built in tools along with calibrating Rotation Distance.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
Tuning Material Flow For Best Quality 3d Prints (OrcaSlicer)ModBot2024-01-27 | Check out VOXELPLA and try out their new PETG here (Aff): bit.ly/3Gmd3Y8
In this video we dive into calibrating flow per material for your 3d printer. This is an important process if you want to ensure you dont have under or overextrusion. The process is fairly simple and we go step by step how to use OrcaSlicers built in tools along with calibrating Rotation Distance.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
Its been a while since we have looked at new slicer features, so today we are diving into OrcaSlicer 2.2. There are some awesome new features for everyone in this release with some exciting new compatibility for multi toolhead printers.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we take look at 9 different accessories, addons, and upgrades for Bambu Lab P1S and X1C printers. This is a great printer and many of these are quality of life improvements covering things like hotends, extruders, beds, filtration, and lighting. I've kept my X1C stock for the most part, but today we are going to change that.
TIMESTAMPS 00:00 Intro 01:34 Panda Door 03:07 Panda Fur 04:33 E3d Diamondback and Panda Claw 07:02 Panda Lux 08:05 Bento Box Filter 09:13 BLLED Controller and G11 Buildplate 12:15 Panda Jetpack 13:29 Other UpgradesLevel Up Your Creality K1 Printer! (Cyclops Extruder)ModBot2024-09-21 | FlexiSpot’s Fall Sale is here! Don’t miss your last chance to save big this season! Use my exclusive code ""YTE7P50” to get extra $50 off on E7 pro, E7 plus and E7L.
In this video we dive into the Cyclops Extruder from the D3vil Design team. I have had my eyes on this extruder since it was first teased as I have never been a big fan of the stock K1 extruder and I love the Orbiter 2. We cover what the extruder is, how to assemble and install it, and do some printing!
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In today's video we take a dive into the Takeoff toolhead. This is a beast of a toolhead made of all SLM printed parts. Paired with Beacon, Chube, FXD extruder, and the Bozzle Nozzle, this is the wildest combination of components I've ever put together. We'll cover what the toolhead is, some details on the hardware, how the assembly went, and future plans!
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video, we dive into Bambu Lab's brand new high flow PETG. This is the first high flow PETG I've tested so I was really curious to see how it compares to a standard PETG. We'll go over its specs, run through a series of test prints, and see what this material has to offer.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we take a dive into the Python mod for BambuLab's AMS system. This upgrade uses the internals of the AMS but replaces all other hardware. This allows for things like wider spool compatibility, active heating, and the ability to use each slot as an external spool for printing with abrasive. We'll go over its details, what the assembly is like, and I'll give you my overall thoughts based on my time with it so far.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we go step by step through the process of upgrading the Ender 3 V3 and V3 Plus from its stock hotend to the Micro Swiss FlowTech hotend. I've been running one of these in my K1 Max since last year and its been solid. Since then the nozzle family has expanded and I use a .8mm DiamondBack for this install.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we take a look at two of the official upgrades for the Sovol SV08. The first is the Klipper Screen upgrade and the second is the enclosure. I had really high hopes for these and it ended up being quite a let down. I'll go over what my experience was like with both in hopes it will help you make a better decision.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
This is a project that is well overdue. I have been struggling to keep track of filament and have any form of organization. Originally I had planned to make RepRacks for the new studio but after seeing FilaBilly I decided it was exactly what I needed. In this video we cover what the system is and what goes into it as we assemble three of these units.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
It's been over a year and half since we have looked at any resin printers on this channel. Ive been really curious to see what sort of new features have come out and if there was any big changes. Elegoo contacted me with interest in me testing out their Saturn 4 Ultra and after seeing some of the specs I agreed. In this video, well dive into the specifics of the printer, what setup was like, how its performed, and Ill give you my overall thoughts based on my time with it so far.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In todays video we continue with our OrcaSlicer calibration videos and look at retraction testing. This is a very simple test that only takes a short time that can be really helpful when trying to dial in a troublesome filament. We go over how the test works, run through some examples, and show how to update this setting in our filament profiles!
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
Its been a long time coming but we are finally starting to see USB toolhead boards releasing. This is awesome for anyone doing custom printer builds or looking to upgrade their printer. In this video, we look at Nitehawk SB, a 2 piece toolhead board from LDO designed specifically for the Stealthburner toolhead. We go over its specs, what included, how to install it, and I share my thoughts along the way.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we dive into the Sovol SV08, a large format corexy 3d printer thats been inspired by the voron 2.4. We cover the printer's specs, what setup was like, how it has performed, and I give you my overall thoughts based on my time with it so far.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we dive into HULA, an Omnidirectional Self-Aligning Anti-Vibration Foot designed to dampen vibrations generated from rapid movements during 3d printing. We go over how they work, whats needed to build them, and do some testing of them on a few printers.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
Check out the TalonClaw 4 Kit (Apulo's Link): https://silverfoxindustries.shop/collections/captain-slug/products/t4-talon-claw-4-hardware-kit?ref=B01K7AFFYgCTU9
In this video we dive into the Ender 3 V3 SE. The Ender 3 has had many revisions but the SE is what I consider the evolution of the original Ender 3. Priced at around $200 I was very curious to see what the state of entry level 3d printers are like in 2024. We go over the printers specs, what setup is like, how it performs, and I share my overall thoughts based on my testing.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we dive into the CB2 from BigTreeTech. This is the latest version of their CB module and an upgrade to the CB1. We'll go over the specs of the CB2 and how it compares to the CB1, cover the process of installing it into my printer, and I'll give you my overall thoughts based on my time with it so far.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we take a look at an awesome community made tool that lets you check the tension of your belts without the need of an app. This might not be so important on printers that arent being pushed, but for performance builds having your belts set within a correct range will help ensure you get the most out of them. We cover what the tool is, how it works, and use it to tension belts on two of my printers!
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video, we dive into PolyDryer, a brand new filament drying and storage solution from Polymaker. This modular system is a pretty unique take on the traditional dryer and provides a lot of potential for future upgrades and mods. We'll go step by step through the specs, how the system works, and I'll share my thoughts based on my time with it so far.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we go step by step through the process of replacing the bed on the Bambu Lab A1. This printer was recalled and everyone was given the option to return/replace the printer or hold onto it until the new bed was ready. Well new beds are shipping and although Bambu has an official guide I found some things along the way that should make the process a bit easier.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we dive into the Qidi Tech Q1 Pro 3d printer. This is the newest in Qidi's line up and comes with some improvements over the X-Max 3 we tested last year. We'll go over the printer's specs, how it has performed, and I will give you my overall thoughts based on my time with it so far.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we continue along with upgrading my V0.2. Last time we worked on the toolhead as we converted it from the Mini StealthBurner to the DragonBurner, and this time its all about the bed. We go over both the Kirigami and the Kirigami UFO mod. We'll cover what they are, what goes into installing them, and I will give you my overall thoughts on each.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
I've been working on building a dog run these past few weeks and ran into some complications with the vinyl fence. Needing to modify a fence post and not wanting to pay $150 in freight for another, I began to look online for fence templates. What I found was a kit for $895 which is WAY more than I was looking to spend. So I decided to DIY it and make my own. In this video we take a look at the process of designing, laser cutting, and using a template.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In today's video we continue in our series of using OrcaSlicer built in calibration tools to dial in a filament profile. We have already covered flow, and pressure advance so its time for us to dive into temperature tests. For this a fairly standard tower is used, but OrcaSlicer makes it super easy to generate them in a few clicks. Well cover how to set them up, and what you should be looking at!
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we dive into the SUNLU Filadryer S4. Ive used a handful of SUNLU dryers over the years and the S4 is by far the largest and most powerful. Well go over the dryers specs, how it performs, and I will give you my overall thoughts based on my time with it so far.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we take a look at Adaptive Meshing in Klipper. This has been possible for a while through an addon such as KAMP, but it has been merged into mainline Klipper. This is something I'm really excited about as I feel it should be a standard across the board. In this video we go through the process of getting it set up.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we take a dive into the Dragon Burner toolhead. I have had my eyes on this for the better part of a year and am so happy I finally took the time to swap my V0 over it. We cover, what Dragon Burner is, why you may want to upgrade to it, and go over the process of converting my Siboor Voron 0.2 too it.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In today's video, we take a look at Siraya Tech's first line of filament which happens to be an 85A TPU. I need to make a functional part and this ended up being the perfect filament for it. Well, go over what is needed to print with this filament, and design a simple part that we print using it.
(´∀`)♡ As an Amazon Associate, I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In today's video we take a look at an awesome addon for Klipper called Klipper Backup. This is a script created by Staubgeborener that once setup will upload your entire Klipper config to github with the press of a button. We go step by step through the process of getting it setup. This is something I plan to start doing to every printer to prevent accidentally losing my config due to hardware failure.,
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we dive into the BigTreeTech Panda Touch. This is a touch screen upgrade for your Bambu Lab Printer that comes with quite a few feature upgrades for your machine. It gives you USB printing, AMS management, and some print farm functionality. We go over the specs, assembly, and some potential concerns in this video.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we take a look at the brand new Leviathan board from LDO. This is a controller that was made in collaboration with JNP and the Voron team specifically for Klipper firmware. It has some nice features like built in 5160s, CANBUS, and connectivity for a Raspberry Pi.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we take a look at E3D's new HF hotend made specifically for the Bambu Lab P and X series of printers. This uses a special coating to prevent buildup and uses a special nozzle insert that great increases the hotends max output. We will go over what the install process is like and what test results where.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
I have purchased a ton of tools over the last decade for 3d printer builds, repairs, mods, and projects. Some of them have been great while others have been a pretty big let down. In this video I cover my top 5 favorites. I tried my best to avoid commonly mentioned tools in hopes some of these will be new for you.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we dive into the Creality K1 Max. There is a lot that has been done well on this printer but the large and commonly warped bed can be problematic. I went down a bit of a rabbit hole with this and will share what I found and what worked to give me much better results.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
Pressure Advance (or Linear Advance in Marlin) is an important part of the tuning process to get the best possible print quality. This is something I have been doing in Klipper for a couple of years and is a fairly simple process. Thanks to new calibration tools it is easier than ever before. In this video I go over the traditional Klipper method as well as my favorite method using Elli's pattern in OrcaSlicer.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In todays video we dive into the newest Bambu Lab printer the A1. This is an I3 style 3d printer and the bigger brother to the A1 Mini that was released just a few months ago. We will go over specs, what setup was like, how it has performed and I will give you my overall thoughts based on my experience so far.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we take a look at Phaetus aeForce™ Pet-GF. This is a high temp PET based filament that contains 15% chopped glass. We will compare this to the Pet-CF we checked out a few months ago and go over what is needed to print with it.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
Prusa Slicer 2.7 has official dropped and with it comes some design and performance additions. In this video we take a look at these changes and how they work. I am really hoping to see some of these expanded upon and ported into other slicers.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we dive into my experience with the Voron 2.4. We go over the machine itself, what the build process was like, the LDO Rev C kit, and what my thoughts are based on my time with it so far.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we take a look at the Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max. This is a brand new hotend featuring a unique nozzle heatbreak hybrid that prevents leaking and allows for cold nozzle swaps. The longer melt zone also provides improved flow. We will go step by step as we remove the stock hotend and get up and running with FlowTech™.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In today's video we dive into a new dryer from Eibos called the Polyphemus. The EasDry and Cyclops have been my go to recommendations for the past couple of years and I was very excited to see what their next generation dryer offered. We will go over the units specs, how it performed, and I will give you my overall thoughts based on my time with it so far.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In this video we take a look at a few upgrades I have made to my Bambu Lab A1 Mini printer. I have really enjoyed using this machine and these few add ons range from being convenient to allowing for abrasive printing. We will go through each of them and cover how to install them.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In today's video we dive into the Qidi Tech X-Max 3 a large CoreXY 3d printer that has a ton of features. This is the rereleased version that has the upgraded frame and steel rods instead of carbon. We will go over the printer specs, what setup was like, and how it has performed.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
Console Commands: G28 X Y G0 X(Your Bed Center) Y(Your Bed Center) BEACON_CALIBRATE BEACON_QUERY G28 Z PROBE_ACCURACY BEACON_ESTIMATE_BACKLASH BED_MESH_CALIBRATE
In today's video we dive into Beacon and Eddy Current Surface Scanner capable of high speed precision bed leveling. I have used many types of bed leveling options over the years but nothing comes close to this. We will go over what Beacon is, requirements, and cover the steps of getting it set up.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In todays video we take a look at PolyHex brand new 3d printing filament aimed at being a replacement for polycarbonate. We will cover the materials properties, what is required to print with it, and I will share what my printing experience has been like.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In todays video we dive into xtouch. This is an ESP32 based addon using MQTT for the Bambu Lab 3d printers. This provides additional functionality and allows P1 Series printers to add a touch screen. The layout is similar to the official X1C screen and setup is fairly straight forward. We will go over the current state of the project, how to install it, and get it hooked up to your printer.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In todays video we take a look into Input Shaping specifically using an accelerometer. I have heard for some time location of ADXL can make a big difference but I have never tested it out to see for myself. Today we compare a CANBUS board ADXL to my usual USB input shaper board along with a new nozzle board.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
In today's video we take a look at the A1 Mini and the AMS Lite from Bambu Lab. This is a brand new cantilever style 3d printer and multi material station aimed to provide a more budget friendly option in Bambu Lab's lineup. When this was sent to me for testing 3 weeks ago I was not sure what to expect going from CoreXY to a bed slinger but this little printer has far surpassed my initial expectations. There is a ton of tech packed into this machine and I think this is really going to shake up what the expectation is for a $300 3d printer.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV
OrcaSlicer has quickly become by go to slicer. Since its inception, it has received frequent updates really giving you fine tooth control of your printer. This past month a fairly large update was released so today we will take a look at a few of my favorite new features.
(´∀`)♡ As an Amazon Associate I earn from qualifying purchases: Buy now on Amazon: http://amzn.to/2jQAOgV