VT200 Magnet Installation Time Lapse @benwl

Plasma Ben | VT200 Magnet Installation Time Lapse @benwl | Uploaded 14 years ago | Updated 2 hours ago
VT200 Magnet Installation Time Lapse

This video shows a two day (~8hrs total) time lapse sequence of installing an electromagnet and gate valve onto the Ad Astra vacuum chamber in support of the VT-200 rocket. The VT-200 will serve as an erosion and thermal testbed for testing VASIMR technology.

HD: Grinell Glacier Path, Glacier National Park

The Space Shuttle Program, Bob Thompson 1

Glacier and melt-off waterfall, Glacier National Park

$Record Power Level For The VASIMR VX-200i, HD This is a record power level test firing in a series of experiments with the VASIMR VX-200 plasma rocket prototype. The rockets 1st stage (a Helicon plasma source) was fired at 30 kW using a state-of-the-art solid state RF power supply, and the rockets 2nd stage was fired at 149 kW using a second solid state RF power supply. Argon gas was used as the propellant, and gives a distinctive purple/blue/UV glow. The second half of the video is slowed down to 1/10 speed during the firing of the second stage. The plasma diagnostics that can be seen in this video are situated on an x-y motion stage capable of moving side to side 200cm and in an out 500cm with 0.5mm precision. Because of the extreme temperatures and heating within the plasma exhaust, the diagnostics are all constructed out of refractory metals, high temperature ceramics, or graphite (or all three). The rocket and everything else seen in this video is located within a vacuum chamber, used to simulate the vacuum environment of space. The VX-200 is the precursor to the VF-200, a flight demonstration unit that is intended to fly on the International Space Station (ISS). http://www.nasa.gov/home/hqnews/2008/dec/HQ_08-332_VASMIR_engine.html www.adastrarocket.com$

Hubble Repair Mission 4, Battery Replacement, HD

Earth escape trajectory from LEO. Code name: SierraSat.