Uploaded January 2026 | Updated November 2026, 1 day ago
Caleb takes a hands-on look at the Vortex Pro Torque Wrench and walks through exactly how to set torque, select the right bit, and verify fastener torque on common firearm components. This is a practical bench-side tool video focused on scope rings, scope bases, AR-15 mounts, and handguard screws, with clear notes on calibration, storage, and proper torque wrench use.
He covers what you get in the box, why the tool feels like a serious piece of equipment, and why the included certificate of calibration matters. Then he demonstrates setting inch-pounds, using the locking head and driver attachments, and applying torque until the wrench clicks or “gives” so you know you’ve hit your setting. He also shows using the wrench on a Badger Ordnance style 1/2-inch base fastener and a Geissele Mk18 handguard screw at higher torque values. Finally, Caleb explains what not to do with this wrench, including using it to loosen hardware, and the importance of backing the setting down to the lowest value for storage.
CHAPTERS
0:08 What the Vortex Pro Torque Wrench is for
0:39 Packaging, first impressions, and build quality
1:15 Certificate of calibration and why it matters
1:38 What you can torque on a firearm: rings, bases, handguards
1:58 Included 1/2-inch driver attachment for many scope mounts
2:22 How the locking head works and how to attach drivers
2:37 How to set torque in inch-pounds
3:00 Example setting for a scope base: dialing to 65 in-lb
3:31 Safety check and verifying torque on a mounted base
4:07 Removing the attachment from the wrench head
4:14 Using it on handguard screws: setting to 75 in-lb
4:33 Included bit selection: Torx, hex, flat, common sizes
4:48 Selecting the right hex bit and torquing the handguard
5:13 After torquing: witness marks and final checks
5:20 Storage and portability: toolbox vs range bag
5:35 What NOT to do: do not use it to loosen bolts
5:45 Proper storage: relieve tension and return to lowest setting
5:58 Wrap-up and Brownells tech line support
Caleb takes a hands-on look at the Vortex Pro Torque Wrench and walks through exactly how to set torque, select the right bit, and verify fastener torque on common firearm components. This is a practical bench-side tool video focused on scope rings, scope bases, AR-15 mounts, and handguard screws, with clear notes on calibration, storage, and proper torque wrench use.
He covers what you get in the box, why the tool feels like a serious piece of equipment, and why the included certificate of calibration matters. Then he demonstrates setting inch-pounds, using the locking head and driver attachments, and applying torque until the wrench clicks or “gives” so you know you’ve hit your setting. He also shows using the wrench on a Badger Ordnance style 1/2-inch base fastener and a Geissele Mk18 handguard screw at higher torque values. Finally, Caleb explains what not to do with this wrench, including using it to loosen hardware, and the importance of backing the setting down to the lowest value for storage.
CHAPTERS
0:08 What the Vortex Pro Torque Wrench is for
0:39 Packaging, first impressions, and build quality
1:15 Certificate of calibration and why it matters
1:38 What you can torque on a firearm: rings, bases, handguards
1:58 Included 1/2-inch driver attachment for many scope mounts
2:22 How the locking head works and how to attach drivers
2:37 How to set torque in inch-pounds
3:00 Example setting for a scope base: dialing to 65 in-lb
3:31 Safety check and verifying torque on a mounted base
4:07 Removing the attachment from the wrench head
4:14 Using it on handguard screws: setting to 75 in-lb
4:33 Included bit selection: Torx, hex, flat, common sizes
4:48 Selecting the right hex bit and torquing the handguard
5:13 After torquing: witness marks and final checks
5:20 Storage and portability: toolbox vs range bag
5:35 What NOT to do: do not use it to loosen bolts
5:45 Proper storage: relieve tension and return to lowest setting
5:58 Wrap-up and Brownells tech line support










