Uploaded February 2025 | Updated November 2026, 3 hours ago
BRENSO trigs USTA that controls BRENSO that... Ok, back from the beginning!
We set the green oscillator to LFO and used its square output as a clock for our USTA sequencer.
Then, we used the saw output to control the amplitude, but first, we added a positive offset with the 321, so that it would work only with positive voltages.
Then, we used USTA to control BRENSO's pitch, but...
It sends "notes" to the LFO, too!
As a result, the LFO/clock/envelope will become faster or slower with every new note of the sequence: high note=fast clock, low note=slow clock!
Experiment with these unconventional uses of BRENSO and USTA and let us know your patch tips!
#fraptools #eurorack #complexoscillator #modularsynth #modularsynthesizer #synthpatcher #synthmusic #brenso #ustasequencer
BRENSO trigs USTA that controls BRENSO that... Ok, back from the beginning!
We set the green oscillator to LFO and used its square output as a clock for our USTA sequencer.
Then, we used the saw output to control the amplitude, but first, we added a positive offset with the 321, so that it would work only with positive voltages.
Then, we used USTA to control BRENSO's pitch, but...
It sends "notes" to the LFO, too!
As a result, the LFO/clock/envelope will become faster or slower with every new note of the sequence: high note=fast clock, low note=slow clock!
Experiment with these unconventional uses of BRENSO and USTA and let us know your patch tips!
#fraptools #eurorack #complexoscillator #modularsynth #modularsynthesizer #synthpatcher #synthmusic #brenso #ustasequencer










