How To Correctly Open the Plastic Case of a Rubiks or LingAo Clock Without Breaking the Shell Team Lead Josh 2024-10-22 | How To Correctly Open the Plastic Case of a Rubiks or LingAo Clock Without Breaking the Shell
Rockland Breakwater Was Underwater - Extreme Tides and Flooding in Coastal Maine Towns Team Lead Josh 2024-01-13 | Rockland, Rockport, Camden, and Lincolnville were all flooded at high tide today.
Hurricane LEE Storm Chasing Extreme Weather on the Maine Coast Team Lead Josh 2023-09-19 | A post tropical cyclone approached the Maine coastline on Saturday morning, September 16, 2023. Disclaimer:Storm chasing and documentation is a dangerous activity. It should only be done by trained professionals. Do not attempt to replicate yourself.
Hurricane Lee Waves and Wind on the Maine Coast Team Lead Josh 2023-09-16 | Recently downgraded to a post tropical cyclone. 11am at Owls Head Light State Park.
Class 3 Drop on St. George River Race Route Team Lead Josh 2022-11-02 | Canoeing whitewater down the St. George River from Searsmont to Appleton. This is the route the race takes which usually happens in late March.
Downhill Mountain Biking at Mt. Abram Bike Park Team Lead Josh 2022-10-08 | Grease Slapper is the trail I took on this run! This bike park is located in Greenwood, Maine.Music from Uppbeat (free for Creators!):uppbeat.io/t/soundroll/flawlessLicense code: JLYGGUMIDYE18UXM
Clear Ice Adventure in Mid-January! Team Lead Josh 2022-01-18 | Its rare to have clear ice in the middle of January! Had a great time this past Sunday ice skating on the lake!Music from Uppbeat (free for Creators!):uppbeat.io/t/hartzmann/clear-skyLicense code: U9Y70RZWPK7AESN4
Ice Skating on a Sunday Afternoon Team Lead Josh 2021-12-27 | This pond just froze this week! Got some good footage of my time on the ice! Make sure to comment if you enjoyed the video!Music from Uppbeat (free for Creators!):uppbeat.io/t/infraction/ultravioletLicense code: ACN8BKCSK2XFD1SE
EPIC CLIFF JUMPING at QUARRY Team Lead Josh 2021-08-25 | Headed to a local quarry for some epic footage of some jumps. Then I give a tour of the new head unit in my car. Camera:DJI Osmo ActionMusic:Music from Uppbeat (free for Creators!):uppbeat.io/t/trinity/flawlessLicense code: SYIW8YJCMT6IHWKMMusic from Uppbeat (free for Creators!):uppbeat.io/t/hartzmann/clear-skyLicense code: IYQJZ3KEOVJKWK8S
SNEAKING my GOPRO down WATER SLIDES at Water Country, NH! Team Lead Josh 2021-08-20 | Went on a fun adventure at Water Country in Portsmouth, NH!Camera:DJI Osmo ActionContact:josh@thecornercutterpodcast.comMusic from Uppbeat (free for Creators!):uppbeat.io/t/soundroll/feeling-homeLicense code: 8NP2RC47F89WPSGPMusic from Uppbeat (free for Creators!):uppbeat.io/t/ben-johnson/cant-stop-chasing-youLicense code: 3RSAUV4OJ1S149P7
Things are changing..... Team Lead Josh 2021-07-18 | I'm changing the direction of this channel! Lots of great content coming soon! Thanks so much for watching!
Cubing at Home Competitions with Samuel Baird - TCCP#92 | A Cubing Podcast Team Lead Josh 2020-05-29 | Samuel joins me this episode to discuss the online Cubing at Home competitions which are happening becuase of the virus. We discuss how they got started and much more!Find more info: www.cubingathome.comSend in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Thanks you Patrons for your continued support! To support the show on Patreon or when you order cubes visit: thecornercutterpodcast.com/supportIntro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0Find all other music at: musicformakers.com
Updates from Josh and Your Feedback - TCCP#91 | A Cubing Podcast Team Lead Josh 2020-03-26 | I'm back with another episode! Included in this mini episode are updates, emails and reviews from fans, and my thoughts about the China Corona Virus.Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Thanks you Patrons for your continued support! To support the show on Patreon or when you order cubes visit: thecornercutterpodcast.com/supportIntro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0Find all other music at: musicformakers.com
Lucas Garron Interview_WCA Regulations Committee Leader - TCCP#90 | A Cubing Podcast Team Lead Josh 2020-01-16 | Lucus Garron WRC Leader (Regulations Committee at the WCA) joins me this episode to discuss his role and responsibilities. Later he talks about how 3x3 with Feet was removed from the WCA list of official events, and the status of clock with the new regulations implemented this year.Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Thanks you Patrons for your continued support! To support the show on Patreon or when you order cubes visit: thecornercutterpodcast.com/supportIntro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0Find all other music at: musicformakers.com
The Cube Shack and Hygiene at Competitions - TCCP#89 | A Speed Cubing Podcast Team Lead Josh 2019-12-28 | We discuss the hygiene issues with 3x3 with Feet and then talk about general hygiene at competitions. Levi owns a cube store called The Cube Shack which offers cheap prices and quick shipping. Check out The Cube Shack: bit.ly/thecubeshackComment with your thoughts!Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Thanks you Patrons for your continued support! To support the show on Patreon or when you order cubes visit: thecornercutterpodcast.com/supportIntro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0Find all other music at: musicformakers.com
Graham Siggins Interview_53/57 Multi-Blind World Record Holder - TCCP#88 | A Speedcubing Podcast Team Lead Josh 2019-11-02 | Graham joins me this episode to discuss his MBLD World Record! We have an awesome discussion about his progress, routine, and the techniques he uses during his attempts. Other topics include skateboarding, podcasts, and even earplugs. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com To support the show on Patreon or when you order cubes visit: thecornercutterpodcast.com/supportIntro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0Find all other music at: musicformakers.com
Jonah Crosby Interview_4x4 Podium at US Nationals 2019 - TCCP#87 | A Weekly Cubing Podcast Team Lead Josh 2019-10-26 | I have a fun conversation with Jonah about achieving the 4x4 podium at US Nats 2019, how he learned how to solve the cube, and his education goals. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com To support the show on Patreon or when you order cubes visit: thecornercutterpodcast.com/supportIntro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0Find all other music at: musicformakers.com
JPerm.net, SpeedCubeShop Open, and FMC North Americas with Dylan Wang - TCCP#86 | Cubing Podcast Team Lead Josh 2019-09-13 | J Perm is back on the podcast to talk about his new website jperm.net! He shares how he created the site as well as his goals and the feedback he has received. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: https://thecornercutterpodcast.com To support the show on Patreon or when you order cubes visit: thecornercutterpodcast.com/supportIntro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0Find all other music at: musicformakers.com
Nearest Competition, Smart Cubes, and Best Online Rubiks Cube Timers - TCCP#85 | Cubing Podcast Team Lead Josh 2019-08-30 | Segments this week are Cubing News, your awesome feedback, personal and podcast updates, best online timers, and finally your answers to Question of the Month. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com To support the show on Patreon or when you order cubes visit: thecornercutterpodcast.com/supportSource:spreaker.com/user/9520971/thecornercutterpodcast-85Intro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0Find all other music at: musicformakers.com
US Nationals 2019 Wrap-up with Shawn Boucké from SpeedCubeReview - TCCP#84 | A Weekly Cubing Podcast Team Lead Josh 2019-08-15 | Finally, the CubingUSA Nationals 2019 wrap-up episode! Shawn is back on the podcast to talk about his experience, share fun stories, and discuss the world records that happened! Other topics covered are 3x3 Finals, Subway, and even electric scooters!Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com To support the show when you order cubes visit: thecornercutterpodcast.com/supportSource:spreaker.com/user/9520971/thecornercutterpodcast-84Intro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0Find all other music at: musicformakers.com
Making a Magnetic LingAo or Rubiks Clock that is Durable and WCA Legal - New Updated Tutorial! Team Lead Josh 2019-08-09 | I made this updated guide to show some new/different things I do to make a better, more durable magnetic clock. Make sure to watch the original tutorial as well: youtube.com/watch?v=y94WNU1LcvE&t=9sBuy a magnet set with both the Ring and Disc magnets: thecornercutterpodcast.com/clockmagnets Buy a fully set-up magnetic clock: thecornercutterpodcast.com/magneticclockHow to open a the plastic case of the clock: youtube.com/watch?v=VNgn5fhxDGICheck out the podcast here: thecornercutterpodcast.comPlease comment with your thoughts and experience!
CANcube.ca_Interview with Owner Garrett Collins - TCCP#83 | A Weekly Cubing Podcast Team Lead Josh 2019-08-08 | Garrett Collins from CANcube.ca is on the podcast this week to talk about Maple Cubes, running a cube store, shipping, and much more! To get a discount off your next order visit: thecornercutterpodcast.com/supportSend in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.comSource:spreaker.com/user/9520971/thecornercutterpodcast-83 Intro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0Find all other music at: musicformakers.com
CubeSolveHero Interview_YouTuber Brandon Cannady - TCCP#82 | A Weekly Cubing Podcast Team Lead Josh 2019-07-30 | Brandon Cannady from CubeSolveHero joins me this week to talk about his channel including discussion about popular videos, giveaways and future goals. We also talk about what he enjoys doing most with YouTube and then Brandon shares tips and insight on building a following and getting sponsored. Subscribe to the podcast on Apple Podcasts, Google Podcasts, and Spotify.Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-82Intro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0Find all other music at: musicformakers.com
Antonie Paterakis Interview_2x2 World Champion and Greece NR Holder - TCCP#81 | Cubing Podcast Team Lead Josh 2019-06-25 | Antoine shares some fun stories about getting free stuff from cubing, his favorite competitions, and his goals for getting a higher education. Other topics include getting sponsored by SpeedCubeShop, pyraminx enjoyment, and his sub-5 3x3 solve.Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-81Intro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
No TCCP Episode This Week - Send in your answer for QOM! Team Lead Josh 2019-06-14 | Source:spreaker.com/user/9520971/thecornercutterpodcast-no-episodeI had a college test so this isn't an episode this week. Answer Question of the Month here: thecornercutterpodcast.com/feedback
Squan and 3BLD World Records, Pyraminx Algs, and Your Feedback - TCCP#80 | A Weekly Cubing Podcast Team Lead Josh 2019-06-08 | It is a solo episode this week and the topics are Cubing News, Alg of the Week, Listener Emails, YouTube Comments, and the June Question of the Month. Listen in for information on new releases, thoughts on the Guanlong 3x3, and some L4E tricks. For ways to support the show: thecornercutterpodcast.com/supportSend in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-80Intro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Kian Mansour Interview_Roux and One-Handed - TCCP#79 | A Weekly Cubing Podcast Team Lead Josh 2019-05-29 | This week I talk with Kian Mansour about why he learned the Roux, how he got so fast at One-Handed, and how he keeps up motivation to practice. Other topics include Kian's mains, top OH resources, and competitions stories.NOTE: this episode was out in the RSS feed on Monday the 27th, but I was having issues publishing to YouTube.Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-79Intro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Learning Full OLL and PLL, and Are Flagship Cubes Worth It?_CuberChats - TCCP#78 | Cubing Podcast Team Lead Josh 2019-05-17 | Jack from JCB ShortFilms joins me this CuberChats episode to discuss when to learn Full OLL and PLL. Then later in the episode we talk about whether it is worth paying premium prices for flagship cubes like the Gan X or Valk Power M. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-78Intro Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Stanley Chapel Interview_4x4 & 5x5 Blindfolded World Record Holder - TCCP#77 | Cubing Podcast Team Lead Josh 2019-05-09 | The WR Holder in Big BLD joins me to discuss his recent 4x4 BLD and 5x5 BLD records. He tells us the story of the world records, how he got so fast, how he was introduced to the Rubik's cube, and how he got sponsored by The Cubicle. Comment below or send in your questions or feedback to: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-77Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
WR 5.69 3x3 Average, Listener Comments, and 5 Years of Podcasting - TCCP#76 | Weekly Cubing Podcast Team Lead Josh 2019-04-21 | First solo episode since February! I go over the recent Cubing News including Records, Releases, and details about the Moyu Weilong 3x3 WR M. I also read your emails, comments(leave a nice one for a shoutout!), and wrap up Question of the Month. Other segments include personal and podcast updates. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-76Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Cameron Brown Interview_Owner of SpeedCubeShop.com - TCCP#75 | A Weekly Cubing Podcast Team Lead Josh 2019-04-11 | Cameron and I have a fascinating discussion about SpeedCubeShop on topics like, the story behind the "Astronomy" names, why it took so long to stock the Gan X, weirdest order comments, and lots of other behind the scenes information.Comment with any questions or feedback!Or send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-75Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Older Cubers Discussion_Mindset, GoCube, and Teaching Others - TCCP#74 | A Weekly Cubing Podcast Team Lead Josh 2019-04-03 | Listeners of the show, Reggie and CPak, are on the podcast this week to talk about being an older cuber. Although the majority of cubers are kids and teens, adults enjoy the hobby as well.Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-74Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Calming Competition Nerves and Cube Assembly Stories_CuberChats - TCCP#73 | A Weekly Cubing Podcast Team Lead Josh 2019-03-25 | What is your favorite YouCuber and why? Send in your answer to Question of the Month! In CuberChats this week, Phoenix and I have a fun informative discussion. First we talk about how to conquer competition nerves and best practices to get good solves in comp. Then we each share some fun stories about assembling cubes, especially big cubes. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-73Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
How To Make a Magnetic LingAo or Rubiks Clock - Open, Lube, Magnetize - The Ultimate Mod Tutorial! Team Lead Josh 2019-03-21 | An in-depth guide on making a magnetic clock! I walk you through each step of the process from opening the clock, to lubing, to magnetizing. Let me know what you think and if you made one!Buy a magnet set: thecornercutterpodcast.com/clockmagnetsBuy a fully set-up magnetic clock: thecornercutterpodcast.com/magneticclockHow to open a clock: youtube.com/watch?v=VNgn5fhxDGI&t=1sHow to fix the internal spring issue: youtube.com/watch?v=z4AxkWwagkUTraxxas 50K Lube(use the code "cornercutter"): thecubicle.com/collections/lube/products/traxxas-50k-diff-oilMake sure to watch my UPDATED guide: youtube.com/watch?v=KkkdICek0VA&t=1sThanks for watching and good luck with your clock!
Speculating the Future of the WCA and a Fake SpeedCubeShop - TCCP#72 | A Weekly Cubing Podcast Team Lead Josh 2019-03-17 | THANK YOU FOR 300 SUBSCRIBERS!With 3x3WF most likely being removed from the World Cube Association list of events, we could see some more changes in the next couple of years. Samuel Baird, CuberCubes, and I discuss possible ideas for adding/removing events and naming competitions. Then we discuss the fake Speedcubeshop.co.uk store and how the real SpeedCubeShop.com is dealing with it. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-72Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
FMC Stories with Kacper Rafalski - TCCP#71 | A Weekly Cubing Podcast Team Lead Josh 2019-03-02 | Make sure to send in your answers for Question of the Month! What is your FAVORITE YouCuber and why? Go to: speakpipe.com/thecornercutterpodcastKacper shares some fun and entertaining stories from his official 19 and 20 FMC solves. Then we discuss how he became interested in cubing and then specifically in FMC. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-71Music:Beach Bum Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Sebastiano Tronto Interview_FMC World Record Holder - TCCP#70 | A Weekly Cubing Podcast Team Lead Josh 2019-02-23 | Make sure to send in your answers for Question of the Month! Go to: speakpipe.com/thecornercutterpodcastThis week we take a deep dive into FMC with the current world record holder Sebastiano Tronto. We discuss getting the WR, how he became a speedcuber, and how to learn FMC. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-70Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Mystery Unboxing from SpeedCubeShop.com! Team Lead Josh 2019-02-21 | Buy clock magnets or a fully-lubed and magnetic LingAo Clock here.thecornercutterpodcast.com/clockmagnets
Ja Perm, YouCuber Promos, and Listener Feedback - TCCP#69 | A Weekly Cubing Podcast Team Lead Josh 2019-02-15 | A fun and informative solo episode this week! Cubing News, Alg of the Week, Updates, Promos, and Feedback are some of the segments on this weeks show. Spectrix: youtube.com/channel/UCGuxPHPKLGr7Bv4nwm8N4SQDa1AsianDude: youtube.com/channel/UCHV1K9ffQlMKhL1rB7P05BgMia Cubing: youtube.com/channel/UCvW40W5kWkG1xhiQzADb_EQIGCuber: youtube.com/channel/UC_XTxemf9mR2yStksBqXzcwSend in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.comSource:spreaker.com/user/9520971/thecornercutterpodcast-69 Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
LaZer0MonKey Interview_Phillip Lewicki - TCCP#68 | A Weekly Cubing Podcast Team Lead Josh 2019-02-01 | Phillip Lewicki who hosts the YouTube channel LaZer0MonKey comes on the podcast this week to discuss his 3x3 progress, the process of making Nats and Worlds videos, and his WCA results. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com Source:spreaker.com/user/9520971/thecornercutterpodcast-68Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Magnetic LingAo Clock Comparison VS Regular LingAo Team Lead Josh 2019-01-28 | I compare a Magnetic LingAo Clock and a regular LingAo.Buy the magnets here: thecornercutterpodcast.com/clockmagnets
Cube Setup and Conversation Tips_CuberChats - TCCP#67 | A Weekly Cubing Podcast Team Lead Josh 2019-01-25 | I chat with Owen and Cubing Bear in another CuberChats episode! Owen is an expert at setting up cubes and he talks about the steps and lube needed to make a cube amazing. Cubing Bear talks about how to introduce yourself to new people at competitions. He gives tips on conversation starters, talking with celebrities, and making new friends. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.comSource:spreaker.com/user/9520971/thecornercutterpodcast-67Intro Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Ian Scheffler Interview_Author of Cracking the Cube - TCCP#66 | A Weekly Cubing Podcast Team Lead Josh 2019-01-17 | COMMENT BELOW! In this episode I have a fascinating conversation with Ian Scheffler who wrote the book Cracking the Cube. We discuss the history of the WCA, the creation of the book, and some interesting stories, like what is was like in the green room at Worlds 2013. Send in your questions or feedback: josh@thecornercutterpodcast.com For links and shownotes visit the website: thecornercutterpodcast.com/2019/01/17/ian-scheffler-interview_author-of-cracking-the-cube-tccp66Source:spreaker.com/user/9520971/thecornercutterpodcast-66Intro Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Z3Cubing Interview_(feat. Alex) - TCCP#65 | A Weekly Cubing Podcast Team Lead Josh 2019-01-10 | I have a great conversation with Alex from Z3Cubing! We discuss his YouTube Channel growth, goals, and more! Send in your feedback: josh@thecornercutterpodcast.com For links and shownotes visit my website: thecornercutterpodcast.com/2019/01/10/z3cubing-interview_feat-alex-tccp65Source:spreaker.com/user/9520971/thecornercutterpodcast-65Intro Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Cubing Communities Around the World_Cuber Chats - TCCP#64 | A Weekly Cubing Podcast Team Lead Josh 2019-01-03 | Comment below, let me know what you like about this episode! The main topic this week is how cubing communities and competitions are unique in different parts of the world. Then we discuss the benefits of sculpted or concave hardware. This is episode #3 of Cuber Chats.For links and shownotes visit my website: thecornercutterpodcast.comSource:spreaker.com/user/9520971/thecornercutterpodcast-64Intro Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Q&A With Josh, 3BLD WR, and Listener Feedback - TCCP#63 | A Weekly Cubing Podcast Team Lead Josh 2018-12-23 | Email in your questions and comments: josh@thecornercutterpodcast.com This week I answer your questions ranging from why did you start TCCP to how do I improve Intuitive F2L. Later the segments are Cubing News, Listener Feedback, and Podcast Updates. For links and shownotes visit my website: thecornercutterpodcast.comSource:spreaker.com/user/9520971/thecornercutterpodcast-63Intro Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
WR 3.47 3x3 Single By Yushang Du and 3x3 With Feet Getting Removed_Cuber Chats - TCCP#62 Team Lead Josh 2018-12-08 | For links and shownotes visit my website: thecornercutterpodcast.comThis week I have listeners, Owen and Rustin on the show to discuss two major topics. The WCA is considering removing feet from the events list and the 3x3 WR single was recently broken and is now the first official sub-4 solve ever. Email me with questions, comments, or suggestions for the show: josh@thecornercutterpodcast.comSource:spreaker.com/user/9520971/thecornercutterpodcast-62Intro Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
Debate: RedBull World Championships and Best 5x5 Method - TCCP#61 | A Weekly Cubing Podcast Team Lead Josh 2018-11-28 | thecornercutterpodcast.com/2018/11/27/debate-redbull-world-championships-and-best-5x5-method-tccp61This is the second debate ever on the podcast and the topics are whether the RedBull World Championships are a benefit to the cubing community or if it is hurting the WCA. Then we discuss whether Yau5 is a good choice for 5x5 method. Email me with questions, comments, or suggestions for the show: josh@thecornercutterpodcast.comFor links and other resources visit my website: thecornercutterpodcast.comSource:spreaker.com/user/9520971/thecornercutterpodcast-61Intro Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
J Perm Interview_YouTube Cuber Dylan Wang - TCCP#60 | Cubing Podcast | The CornerCutter Podcast Team Lead Josh 2018-11-21 | How did Dylan grow his YouTube Channel to over 70,000 subscribers in under 2 years? What part of producing videos is he best at? We discuss all this and much more in this episode of the podcast.Subscribe on Apple Podcasts or Google Podcasts here: thecornercutterpodcast.com/subscribeEmail me with questions, comments, or suggestions for the show: feedback@thecornercutterpodcast.comFor links and shownotes visit my website: thecornercutterpodcast.comSource:spreaker.com/user/9520971/thecornercutterpodcast60-11-20-18-3-58-p_1Intro Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
[CLOSED] 100 Subscriber Worldwide Giveaway - The CornerCutter Podcast YouTube Team Lead Josh 2018-11-16 | Welcome to the 100 Subscriber Giveaway for The CornerCutterPodcast YouTube! Win a free cube from Cubezz.com that is $4 or under! Make sure to watch the video for full instructions.Just a few easy steps to enter:1. Make sure you're subscribed and have notifications on.2. Leave a comment below with a guest you want to see on The CornerCutter Podcast. And leave a question for me for an upcoming Q&A episode. 3. Click on this link, enter your name and email, and then gain extra entries by sharing the giveaway and taking other actions. kingsumo.com/g/gfwt0m/100-subscriber-giveaway-the-cornercutter-podcast-youtubeThanks for your support!-Josh from thecornercutterpodcast.com
Competition Clips, Cubing News, and Shoutouts - TCCP#59 | Cubing Podcast | The CornerCutter Podcast Team Lead Josh 2018-11-14 | The Square-1 WR was broken recently along with the 2x2 WR average. I went to a fun competition last weekend and I share some audio clips I recorded while there. Later I give some shoutouts, talk about updates with the podcast, and have Alg of the Week.Email me with questions, comments, or suggestions for the show: josh@thecornercutterpodcast.comFor links and shownotes visit my website: thecornercutterpodcast.comSource:spreaker.com/user/9520971/thecornercutterpodcast59-11-13-18-4-19-pIntro Music:Beach Bum Kevin MacLeod (incompetech.com)Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0
