Uploaded May 2026 | Updated September 2026, 2 weeks ago
This video is Part 4 of my VM Server Build. Thanks for watching.
Video Time Codes (click to skip directly to a desired section of the Video)
0:00 Introduction to PE4Doers' VM Server Build, part 4
0:51 The 3D Printed Case Mods used in a VM Server Build
4:28 Dismantling the VM Server Test Bench
5:48 Installing the Populated Motherboard in the 2U case
7:48 Installing the Small Form Factor PSU into the 2U case
10:37 Connecting the SATA Data and Power Cables to the Dives
12:17 Removing the Case I/O Board Cover blocks
12:53 Attaching Low-Profile Brackets to the GPU and Network Adapter
15:21 Attaching the Front Panel cabling to the 2U case
17:07 Attaching the USB 3.1 and USB-C Case Cables
17:45 Performing a ‘Quick Test’ of the Assembled VM Server
19:18 Ooops, Forgot to connect or install the three case fans
21:22 Testing the Completed Server using a Windows-11 SSD
22:22 Conclusion of PE4Doers' VM Server Build, part 4
Note: I have NOT received any sponsorship for using the products shown in this video. However, as an Amazon Associate I earn from qualifying purchases, when these links are used:
2U Micro ATX Compact Rackmount 3 x 3.5-inch HDD and 1 x 2.5-inch SSD, Chassis Support ATX PS2 PSU, USB
amzn.to/46UFSHX
ASUS Prime B760M-A-CSM Intel B760 (LGA 1700) mATX CSM Commercial Motherboard PCIe 4.0, DDR5, 2X M.2, 2.5Gb LAN, DP, 2X HDMI™, SATA 6 Gbps, USB 3.2 Type-C, Aura Sync, ASUS Control Center Express
amzn.to/40u12Jh
G.SKILL Ripjaws S5 Series DDR5 RAM (Intel XMP 3.0) 32GB (2x16GB) 5600MT/s CL36-36-36-89 1.20V Desktop Computer Memory U-DIMM - Matte Black (F5-5600J3636C16GA2-RS5K)
amzn.to/4dj39XY
WD_BLACK SN850X 2TB NVMe SSD - M.2 2280, Up to 7,300 MB/s Read speeds, Up to 6,300 MB/s write speeds, Gaming Expansion, High Performance Internal Solid State Drive - WDS200T2X0E
amzn.to/4sFXf7J
Seagate BarraCuda 8 TB Internal Hard Drive HDD – 3.5 Inch SATA 6 Gb/s, 5,400 RPM, 256 MB Cache for Computer Desktop PC (ST8000DMZ04/004)
amzn.to/4bh6rK9
GeForce RTX 3050 6G HDMI Graphics Card,GPU Video Cards for PC Gaming,4 3 Monitor Port Output Computer,Pci Express x16 Low Profile Video Card(RTX3050 6G 4HDMI)
amzn.to/3Nd5JUX
2025 NEW 10G Base-T PCI-e4.0 X1 Network Card, Marvell AQC113 Controller, NICGIGA 10Gb Ethernet Adapter Support WOL, 10Gbe RJ45 Port NIC Card, Windows10/11/Windows Server/Linux
amzn.to/4rzJ03r
Noctua NH-L9x65, Premium Low-Profile CPU Cooler (65mm, Brown)
amzn.to/4v9z8jg
Noctua NF-A8 PWM, Premium Quiet Fan, 4-Pin (80mm, Brown)
amzn.to/3OYb8jh
CORSAIR SF750 (2024) Fully Modular SFX Low Noise 80 Plus Platinum Power Supply – ATX 3.1 Compliant – PCIe 5.1 Ready – Small Form Factor – SFX-to-ATX Bracket Included – Black
amzn.to/3P8mZv0
DKE SFX to ATX Power Supply Adapter SFX PSU to fit ATX PS2 PSU Mounting Bracket Designed for Silverstone PC Case and Most ATX or Micro-ATX Computer Cases (Black)
amzn.to/4bClqOJ
chenyang USB 3.1 Gen 2 10Gbps USB Type-E Motherboard to USB C Front Panel Header Extension Cable Adapter with 12cm PCI-E Bracket
amzn.to/47Hx88h
Open Air PC Case, PC Test Bench PC Case, ATX Open Frame Computer Case, DIY PC Rack for ATX MATX ITX Motherboards
amzn.to/4logvnL
Please subscribe to my Channel, and click ‘Like’, if you find this video useful. I will endeavor to answer any and all questions posted for any of my videos as quickly as I possibly can.
If you have any questions or suggestions, I can be reached on Email at: PE4Doers@gmail.com , or on Twitter (X) @PE4Doers, or Instagram @PE4Doers. Or on a more professional basis, through LinkedIn at: linkedin.com/in/davidrrivera
#PE4Doers #vmserver #pcbuild
This video is Part 4 of my VM Server Build. Thanks for watching.
Video Time Codes (click to skip directly to a desired section of the Video)
0:00 Introduction to PE4Doers' VM Server Build, part 4
0:51 The 3D Printed Case Mods used in a VM Server Build
4:28 Dismantling the VM Server Test Bench
5:48 Installing the Populated Motherboard in the 2U case
7:48 Installing the Small Form Factor PSU into the 2U case
10:37 Connecting the SATA Data and Power Cables to the Dives
12:17 Removing the Case I/O Board Cover blocks
12:53 Attaching Low-Profile Brackets to the GPU and Network Adapter
15:21 Attaching the Front Panel cabling to the 2U case
17:07 Attaching the USB 3.1 and USB-C Case Cables
17:45 Performing a ‘Quick Test’ of the Assembled VM Server
19:18 Ooops, Forgot to connect or install the three case fans
21:22 Testing the Completed Server using a Windows-11 SSD
22:22 Conclusion of PE4Doers' VM Server Build, part 4
Note: I have NOT received any sponsorship for using the products shown in this video. However, as an Amazon Associate I earn from qualifying purchases, when these links are used:
2U Micro ATX Compact Rackmount 3 x 3.5-inch HDD and 1 x 2.5-inch SSD, Chassis Support ATX PS2 PSU, USB
amzn.to/46UFSHX
ASUS Prime B760M-A-CSM Intel B760 (LGA 1700) mATX CSM Commercial Motherboard PCIe 4.0, DDR5, 2X M.2, 2.5Gb LAN, DP, 2X HDMI™, SATA 6 Gbps, USB 3.2 Type-C, Aura Sync, ASUS Control Center Express
amzn.to/40u12Jh
G.SKILL Ripjaws S5 Series DDR5 RAM (Intel XMP 3.0) 32GB (2x16GB) 5600MT/s CL36-36-36-89 1.20V Desktop Computer Memory U-DIMM - Matte Black (F5-5600J3636C16GA2-RS5K)
amzn.to/4dj39XY
WD_BLACK SN850X 2TB NVMe SSD - M.2 2280, Up to 7,300 MB/s Read speeds, Up to 6,300 MB/s write speeds, Gaming Expansion, High Performance Internal Solid State Drive - WDS200T2X0E
amzn.to/4sFXf7J
Seagate BarraCuda 8 TB Internal Hard Drive HDD – 3.5 Inch SATA 6 Gb/s, 5,400 RPM, 256 MB Cache for Computer Desktop PC (ST8000DMZ04/004)
amzn.to/4bh6rK9
GeForce RTX 3050 6G HDMI Graphics Card,GPU Video Cards for PC Gaming,4 3 Monitor Port Output Computer,Pci Express x16 Low Profile Video Card(RTX3050 6G 4HDMI)
amzn.to/3Nd5JUX
2025 NEW 10G Base-T PCI-e4.0 X1 Network Card, Marvell AQC113 Controller, NICGIGA 10Gb Ethernet Adapter Support WOL, 10Gbe RJ45 Port NIC Card, Windows10/11/Windows Server/Linux
amzn.to/4rzJ03r
Noctua NH-L9x65, Premium Low-Profile CPU Cooler (65mm, Brown)
amzn.to/4v9z8jg
Noctua NF-A8 PWM, Premium Quiet Fan, 4-Pin (80mm, Brown)
amzn.to/3OYb8jh
CORSAIR SF750 (2024) Fully Modular SFX Low Noise 80 Plus Platinum Power Supply – ATX 3.1 Compliant – PCIe 5.1 Ready – Small Form Factor – SFX-to-ATX Bracket Included – Black
amzn.to/3P8mZv0
DKE SFX to ATX Power Supply Adapter SFX PSU to fit ATX PS2 PSU Mounting Bracket Designed for Silverstone PC Case and Most ATX or Micro-ATX Computer Cases (Black)
amzn.to/4bClqOJ
chenyang USB 3.1 Gen 2 10Gbps USB Type-E Motherboard to USB C Front Panel Header Extension Cable Adapter with 12cm PCI-E Bracket
amzn.to/47Hx88h
Open Air PC Case, PC Test Bench PC Case, ATX Open Frame Computer Case, DIY PC Rack for ATX MATX ITX Motherboards
amzn.to/4logvnL
Please subscribe to my Channel, and click ‘Like’, if you find this video useful. I will endeavor to answer any and all questions posted for any of my videos as quickly as I possibly can.
If you have any questions or suggestions, I can be reached on Email at: PE4Doers@gmail.com , or on Twitter (X) @PE4Doers, or Instagram @PE4Doers. Or on a more professional basis, through LinkedIn at: linkedin.com/in/davidrrivera
#PE4Doers #vmserver #pcbuild
