Uploaded April 2022 | Updated September 2026, 9 hours ago

---

Contact VideoRay's customer support at support@videoray.com or visit videoray.com for more information.

0:00 Make sure the vehicle is connected to the control console and powered on
0:09 Open Terminal on the desktop
0:17 Type "cd flighthack" then press enter
0:28 Type "vr_setid THR00𝚜𝚎𝚛𝚒𝚊𝚕𝚗𝚞𝚖𝚋𝚎𝚛 𝙽𝚘𝚍𝚎𝙸𝙳 𝙶𝚛𝚘𝚞𝚙𝙸𝙳" then press enter
0:49 Type "vr_enum" then press enter
1:04 Type "./vr_dubug_putty.py 𝙽𝚘𝚍𝚎𝙸𝙳"
1:15 Press "c" on your keyboard
1:45 Type "2" to toggle between "ENABLED" and "DISABLED"
1:57 Type "17" and type the desired value
2:09 Type "31" and type the desired value
2:22 Type "s" then press enter
2:29 Type "x" then press enter
2:34 Press "x"
2:50 Verify that the programming was successful