Uploaded March 2015 | Updated September 2026, 2 weeks ago

---

Other part of the video youtu.be/DeOteihjWxg
Facebook: facebook.com/MAT2COMPOSITES
Instagram: matthieulibeert
Twitter: @matthieutje65

In this Proof of Concept video, I am trying to show you how an infusion is done on the mould side. Interesting thing as well is that the 2 glass plates, used as moulds, are connected to each other. By this I mean the Resin outlet of the first part is connected to the resin inlet on the second one. The end of the second plate goes to the Easycomposites catchpot, connected once again to the vacuumpump. By working this way, less tubing is used and less resin is wasted.

The trick of doing a vertical infusion probably wont change anything to the finish of the part. This was done more in an illustrative way to show that vacuum flows evenly and gravity wont change much to the flow. Resin will always search for the lowest vacuum, filling these.
It was off course done vertically to show you the back of the Resin infusion

Materials used in this video
________________________

Easy-Lease Mould Cleaner - 500ml
easycomposites.co.uk/products/release-agents/easylease-mould-cleaner.aspx
Easy-Lease Chemical Release Agent - 500ml
easycomposites.co.uk/products/release-agents/easylease-chemical-release-agent.aspx
IN2 Epoxy Infusion Resin 1kg Pack SLOW
easycomposites.co.uk/products/epoxy-resin/epoxy-infusion-resin.aspx
Carbon Fibre 2/2 Twill 12k 450g 1m Wide
easycomposites.co.uk/products/carbon-fibre-cloth-fabric/medium-weight-carbon-fibre-cloth-22-twill-450gsm-12k-1m.aspx
Textreme carbonfiber
textreme.com
Resin Infusion Silicone Connector
easycomposites.co.uk/products/vacuum-bagging/resin-infusion-silicone-connector.aspx
Composites Vacuum Pump
easycomposites.co.uk/products/vacuum-bagging/composites-vacuum-pump.aspx
Vacuum Degassing Chamber - 26L
easycomposites.co.uk/products/vacuum-equipment/vacuum-degassing-chamber-26l.aspx
Professional Resin Infusion Catch-Pot
easycomposites.co.uk/products/vacuum-bagging/professional-resin-infusion-catch-pot-small.aspx
Resin Infusion Line Clamp
easycomposites.co.uk/products/vacuum-bagging/vacuum-resin-infusion-line-clamp.aspx
6mm ID Budget PVC Vacuum Hose 5m
easycomposites.co.uk/products/vacuum-bagging/6mm-PVC-vacuum-hose.aspx
Vacuum Bagging Film
easycomposites.co.uk/products/vacuum-bagging/vacuum-bagging-film.aspx
Peel Ply 1.52m Wide
easycomposites.co.uk/products/vacuum-bagging/peel-ply.aspx
EasyFlow Knitted Infusion Mesh – 1.4m Wide
easycomposites.co.uk/products/vacuum-bagging/easyflow-knitted-infusion-mesh.aspx
Vacuum Bagging Gum Sealant Tape (High Temp) 15m
easycomposites.co.uk/products/vacuum-bagging/vacuum-bagging-gum-tape.aspx
Resin Infusion Spiral Medium Flow 10m Coil
easycomposites.co.uk/products/vacuum-bagging/infusion-spiral.aspx