Rust in Canada 6 - 448 000 kms - How Rusty Can it Be? - Part 1 youtu.be/my4xOG686uQ
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk.
Rust in Canada 6 - 448 000 kms - How Rusty Can it Be? - Part 1 youtu.be/my4xOG686uQ
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk.Rear Brake Pads and Rotors Replacement - 1999-2007 GMC/CHEV Sierra/Silverado 1500/2500MudRFunR2023-03-05 | Complete video from start to finish. This truck is a 2004 GMC 2500. Brake replacement should be similar on 1999-2007 GMC/CHEV Sierra/Silverado 1500/2500
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Headrest Removal So Easy - Should be similar on most vehiclesMudRFunR2023-02-24 | Truck used in this video - 2004 GMC Sierra
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Sunken Seat Cushion Disassembly and RepairMudRFunR2023-01-15 | Seat cushion removal... Removing the cover... Repairing seat frame... Reassembling seat... Reinstalling seat. Truck used in this video - 2004 GMC Sierra
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Engine Oil and Filter Change - 2016 Mercedes Sprinter 2 1L DieselMudRFunR2022-12-08 | Should be the same for 2013 - 2019 Sprinter 2.1L
Disclaimer - I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the van shown in this video.Reset Dashboard Maintenance Schedule - Oil Life Reset - 2016 Sprinter 2.1LMudRFunR2022-12-08 | Should be the same for 2013 - 2019 Sprinter 2.1L
Disclaimer - I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the van shown in this video.Lighting the Beehive SmokerMudRFunR2021-10-09 | How much did a beekeeper suit and tools cost? Find out! Flow Hive Classic Araucaria 7 Frame Kit shown in this video.
Disclaimer - This video is for entertainment purposes. Any and all information or advice given will be used at your own risk. Some models may vary from the kit shown in this video.10 000 Bees Plus a QueenMudRFunR2021-10-03 | My first time ever installing a Nuc! Flow Hive Classic Araucaria 7 Frame Kit shown in this video.
Disclaimer - This video is for entertainment purposes. Any and all information or advice given will be used at your own risk. Some models may vary from the kit shown in this video.How to Assemble a Flow Hive Classic Kit Part 2MudRFunR2021-09-15 | Flow Hive Classic Araucaria 7 Frame Kit shown in this video.
Disclaimer - This video is for entertainment purposes. Any and all information or advice given will be used at your own risk. Some models may vary from the kit shown in this video.How to Assemble a Flow Hive Classic Kit Part 1MudRFunR2021-08-28 | Flow Hive Classic Araucaria 7 Frame Kit shown in this video.
Disclaimer - This video is for entertainment purposes. Any and all information or advice given will be used at your own risk. Some models may vary from the kit shown in this video.Whats in a Flow Hive Kit? UnboxingMudRFunR2021-07-08 | Flow Hive Classic – Araucaria 7 Frame Kit.
Disclaimer - This video is for entertainment purposes. Any and all information or advice given will be used at your own risk. Some models may vary from the kit shown in this video.Front Sway Bar Link Replacement - 2008 -13 MalibuMudRFunR2021-06-28 | Car used in this video - 2008 Malibu LS 2.4L Ecotec
Disclaimer - This video is for entertainment purposes. Some models may vary. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk.Tie Rod Replacement - 2008 -13 MalibuMudRFunR2021-06-07 | Car used in this video - 2008 Malibu LS 2.4L Ecotec
Disclaimer - This video is for entertainment purposes. Some models may vary. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk.Broke a Ball Joint... So Much Damage!MudRFunR2021-05-15 | Front end dropped when it broke! Truck used in this video - 2004 GMC 2500 HD LLY Duramax
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Putt Putt 3 Test Run - Boat Fire and TroubleshootingMudRFunR2021-05-07 | Putt Putt Boat Test Drive Boat has a Fire - Watch the End! This engine was built using epoxy glue, a pop can and plastic tubing.
Disclaimer - This video is for entertainment purposes. Any and all information or advice given will be used at your own risk.Make a Putt Putt Boat - 3rd Pop Can Engine DesignMudRFunR2021-04-21 | How to Build a Putt Putt Boat with Test Start! Watch the End! This engine was built using epoxy glue, a pop can and plastic tubing.
Disclaimer - This video is for entertainment purposes. Any and all information or advice given will be used at your own risk.Make a Putt Putt Boat - 2nd Pop Can Engine DesignMudRFunR2021-04-18 | How to Build a Putt Putt Boat with Test Start! Watch the End! This engine was built using epoxy glue, a pop can and brake line tubing.
Disclaimer - This video is for entertainment purposes. Any and all information or advice given will be used at your own risk.Pop Can Putt Putt Boat - First Attempt Using Stick TacMudRFunR2021-03-21 | My first ever attempt at building a Putt Putt Boat. This engine will be built using Stick Tac and a pop can.
Disclaimer - This video is for entertainment purposes. Any and all information or advice given will be used at your own risk.Belt Tensioner Replacement - Chevy Colorado/ GMC CanyonMudRFunR2021-03-08 | 2004 - 2012 3.5L Inline 5 cylinder. Truck used in this video is a 2004 Chevy Colorado.
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Mercedes Sprinter Diesel Block Heater Hose RoutingMudRFunR2021-02-26 | 2016 Mercedes Sprinter van used in this video to show how the diesel block heater hoses are routed to the engine block.
JVC Quad Proof Waterproof Camcorder - amzn.to/2YC6Tus Sony Action Cam that I use - amzn.to/2O0x1gx Sony Camcorder that I use - amzn.to/2MPwmdhDuramax Fuel Filter and Water Sensor ReplacementMudRFunR2021-02-21 | Truck used in this video - 2004 GMC 2500 HD LLY Duramax
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Front Driver Fender Replacement - Includes Fuse Box Removal - 1999 - 2007 GMC SierraMudRFunR2021-02-13 | Complete video from start to finish.
This truck is a 2004 GMC 2500.Fender replacement should be similar on 1999-2007 GMC/CHEV Sierra/Silverado 1500/2500/3500.
0:00 Important Info 1:31 Battery Disconnect 1:58 Flare Removal 4:20 Marking and Removing Hood 6:18 Front End Disassembly 8:58 Removing all the Bits 11:30 Fuse Box Removal 15:24 Actual Fender Removal 17:54 New Fender Prep 23:27 New Fender Install 29:25 Fuse Box Install 32:45 Install All the Bits 34:50 Hood Install 38:31 Body and Paint Progress 40:11 Front End Assembly 42:11 Paint Reveal 43:20 Special Announcement
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Front Passenger Fender Replacement - 1999 - 2007 GMC SierraMudRFunR2020-12-08 | Complete video from start to finish. This truck is a 2004 GMC 2500.Fender replacement should be similar on 1999-2007 GMC/CHEV Sierra/Silverado 1500/2500/3500.
00:00 Intro 00:40 Flare Removal 3:19 Front End Disassembly 5:48 Marking and Removing Hood 7:44 Removing all the Bits 13:03 Actual Fender Removal 14:58 New Fender Prep 22:06 New Fender Install 25:02 Install All the Bits 28:31 Hood Install 32:40 Front End Assembly
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Mini Jet Engine Diesel Block HeaterMudRFunR2020-10-27 | Jet Engine? Mercedes has an unusual block heater that runs on diesel from the van's tank. This is a 2016 Mercedes Sprinter van.Duramax Block Heater Replacement from Start to Finish - Drain Remove Install and RefillMudRFunR2020-10-20 | Full video, starting with draining the radiator, removal of block heater and reinstalling, then, Refilling the cooling system and removing air pockets.
Truck used in this video 2004 GMC/CHEV 2500HD LLY Duramax.I realize that the sound is off near the end. Sorry about that.
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Front Speaker Replacement - 2008 -13 MalibuMudRFunR2020-08-25 | Car used in this video - 2008 Malibu LS 2.4L Ecotec
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk.What NOT to do - U-Joint ReplacementMudRFunR2020-08-13 | Some tips for common problems when installing a universal joint. Quick Tip #15 Truck used in the video is a 1994 S10 4.3L
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Driving It! - No Front End - 94 S10 Engine InstallMudRFunR2020-07-26 | Driving the S10 without a front end. Driving the Jeep. Preparing for Gopher Dunes Mudfest. Truck used in the video is a 1994 S10 4.3L early Vortec. Recorded in 2013 Weekly Flashback! Sometime Sunday Episode 12
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Throttle Body Repair First Start - 94 S10 Engine InstallMudRFunR2020-07-19 | Removing and replacing the top section of the throttle body. Weekly Flashback! Sometime Sunday Episode 11 Truck used in the video is a 1994 S10 4.3L early Vortec. Recorded in 2013
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.First Crank After Engine Install - Stuck Starter and TipsMudRFunR2020-07-12 | Weekly Flashback! Sometime Sunday Episode 10 Truck used in the video is a 1994 S10 4.3L early Vortec. Recorded in 2013
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Chev/GMC Distributor Install 4.3L V6 VortecMudRFunR2020-07-06 | Weekly Flashback! Sometime Sunday Episode 9 Truck used in the video is a 1994 S10 4.3L early Vortec. Recorded in 2013
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Engine Install - 4.3L V6 into 94 S10MudRFunR2020-06-29 | Installing the engine and transmission all in one. Then installing the transfer case. Recorded in 2013 Weekly Flashback! Sometime Sunday Episode 8
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Snow RescueMudRFunR2020-06-21 | Weekly Flashback! Sometime Sunday Episode 7
JVC Quad Proof Waterproof Camcorder - amzn.to/2YC6Tus Sony Action Cam that I use - amzn.to/2O0x1gx Sony Camcorder that I use - amzn.to/2MPwmdhSee Thru Car - The Inner WorkingsMudRFunR2020-06-14 | See the inner workings or this see thru car from Lane Motor Museum, Nashville Tennessee!
Weekly Flashback! Sometime Sunday Episode 6
JVC Quad Proof Waterproof Camcorder - amzn.to/2YC6Tus Sony Action Cam that I use - amzn.to/2O0x1gx Sony Camcorder that I use - amzn.to/2MPwmdhMassive Military Tank CarrierMudRFunR2020-06-07 | Military Vehicles from Lane Motor Museum, Nashville Tennessee! Weekly Flashback! Sometime Sunday Episode 5
JVC Quad Proof Waterproof Camcorder - amzn.to/2YC6Tus Sony Action Cam that I use - amzn.to/2O0x1gx Sony Camcorder that I use - amzn.to/2MPwmdhPropeller Propelled Cars - Wind WagonsMudRFunR2020-05-31 | Wind Wagons from Lane Motor Museum, Nashville Tennessee! Weekly Flashback! Sometime Sunday Episode 4
JVC Quad Proof Waterproof Camcorder - amzn.to/2YC6Tus Sony Action Cam that I use - amzn.to/2O0x1gx Sony Camcorder that I use - amzn.to/2MPwmdhStrange BikesMudRFunR2020-05-24 | First Harley ever built (replica) and more strange bikes from Lane Motor Museum, Nashville Tennessee! Weekly Flashback! Sometime Sunday Episode 3
JVC Quad Proof Waterproof Camcorder - amzn.to/2YC6Tus Sony Action Cam that I use - amzn.to/2O0x1gx Sony Camcorder that I use - amzn.to/2MPwmdhGMC/Chev 2500 - Trailer Hitch Install - DrawTite Class 5MudRFunR2020-05-23 | 1999 - 2006 Sierra/Silverado - This truck is a 2004 GMC 2500. Trailer hitch replacement should be similar on 1500 series.
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Tiny Tiny CarsMudRFunR2020-05-17 | Tiny Cars from Lane Motor Museum, Nashville Tennessee! Weekly Flashback! Sometime Sunday Episode 2
JVC Quad Proof Waterproof Camcorder - amzn.to/2YC6Tus Sony Action Cam that I use - amzn.to/2O0x1gx Sony Camcorder that I use - amzn.to/2MPwmdhSmashed Trashed 327 Teardown!MudRFunR2020-05-10 | Corvette inspired 327 totally trashed after several Mud Bogs! Never seen anything like it.
JVC Quad Proof Waterproof Camcorder - amzn.to/2YC6Tus Sony Action Cam that I use - amzn.to/2O0x1gx Sony Camcorder that I use - amzn.to/2MPwmdhNew Weekly Flashback Videos - Sometime Every SundayMudRFunR2020-05-09 | Sometime Sunday is a sneaky way for me to use my old footage AND get you to watch it! It's like Throwback Thursday or Flashback Friday.
JVC Quad Proof Waterproof Camcorder - amzn.to/2YC6Tus Sony Action Cam that I use - amzn.to/2O0x1gx Sony Camcorder that I use - amzn.to/2MPwmdhFender Flare Replacement - A Bit Redneck But It WorkedMudRFunR2020-05-03 | This truck is a 2004 GMC 2500. Fender flare replacement should be similar on most trucks.
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.
Chapters 0:00 Intro 0:52 Getting Prepared 2:48 Removing 2 SidedTape 5:40 Removing Flare 8:01 Removing Tape Residue 10:06 Applying New Tape 11:27 Re-installing FlareRear Bumper Repair and Install - 1999-2007 GMC/Chev 1500/2500/3500MudRFunR2020-04-30 | This truck is a 2004 GMC 2500. Bumper replacement should be similar on 1999-2007 GMC/CHEV Sierra/Silverado 1500/2500/3500.
Disclaimer - This video is for entertainment purposes. I am not a licensed mechanic. Any and all information or advice given will be used at your own risk. Some models may vary from the truck shown in this video.Homemade Greenhouse Build 3/3 - Plastic Goes OnMudRFunR2020-04-19 | Using 6 mil 12'x50' roll of clear greenhouse plastic. 8'x12' Greenhouse build. No permit required in my area.
This video is for entertainment purposes. Any and all information or advice given will be used at your own risk.Homemade Greenhouse Build 2/3 - Support BracesMudRFunR2020-04-16 | Using reclaimed wood for braces. 8'x12' Greenhouse build. No permit required in my area.
This video is for entertainment purposes. Any and all information or advice given will be used at your own risk.Homemade Greenhouse Build 1/3 - PVC Arches and ErrorsMudRFunR2020-04-14 | Making CPVC arches and making mistakes along the way. 8'x12' Greenhouse build. No permit required in my area.
This video is for entertainment purposes. Any and all information or advice given will be used at your own risk.Scary Hitch, Nice Frame & Box Install - 450 000 kms - How Bad Can it Be? - Rust in Canada 6 - Part 4MudRFunR2020-03-21 | 04 GMC Sierra 2500 A closer look at the trailer hitch and the renewed frame.
Stubborn Screw Removal - youtube.com/watch?v=UZV8FWRgCkEFrame, Fuel Leaks and Wiring - 450 000 kms - How Bad Can it Be? - Rust in Canada 6 - Part 3MudRFunR2020-03-12 | 04 GMC Sierra 2500 Frame cleaning, repairing fuel leaks and rewiring.
Stubborn Screw Removal - youtube.com/watch?v=UZV8FWRgCkERust Reveal - 450 000 kms - How Bad Can it Be? - Rust in Canada 6 - Part 2MudRFunR2020-02-13 | Removing, Moving and Loading the Box. 04 GMC 2500... Sooo Rusty!
Stubborn Screw Removal - youtube.com/watch?v=UZV8FWRgCkERemoving All the Bits - 450 000 kms - How Bad Can it Be? - Rust in Canada 6 - Part 1MudRFunR2020-02-02 | Removing everything that's attached to the box for Box Replacement on my 04 GMC 2500... Sooo Rusty!