Uploaded February 2026 | Updated November 2026, 2 days ago
This prepreg composite material doesn't cure like you think.
Prepreg (pre-impregnated) means the fabric already has resin in it. Epoxy, vinylester, or polyester. This system uses UV initiators IN the resin, so it only cures when exposed to UV light. You can lay up your part for 2-3 hours without it going off.
Then throw it outside for 5 minutes.
Hard.
Done.
The long working time means you're NOT racing the clock during layup, and UV activation gives you total control over when it cures. Perfect for complex parts where traditional resin systems would kick before you're finished.
--------------------
FREE STUFF
🏆 Free Race Car Parts On Us | Enter the Giveaway
hpcdmy.co/giveaway
🏎 Start Tuning With Confidence | EFI Fuel & Ignition Basics Lesson
hpcdmy.co/EFI101y
💻 How to Tune Stock ECUs Safely | HP Tuners Fuel & Ignition Lesson
hpcdmy.co/hptly
⚡ Motorsport-Grade Wiring Made Simple | Learn Essential Skills
hpcdmy.co/wiringlessonyt
🧑💻 Design. Digitise. Develop. | CAD & 3D Scanning Lesson
hpcdmy.co/learnCADnow
🧰 Engine Building Basics That Matter | Watch Now
hpcdmy.co/eby
🔧 Learn to Align Like a Pro | DIY String Alignment & Setup Guide
hpcdmy.co/aljyt
🛻 Unlock Your Diesel’s Potential | Step-by-Step Tuning Introduction
hpcdmy.co/essential-diesel-knowledge
--------------------
MERCH
👕 Warning: May Cause Random Tech Chats at the Track: hpcdmy.co/merchy
#highperformanceacademy #buildtunedrive #composites #prepreg #carbonfiber #compositefabrication #uvresin #fabrication #carbonfiberfabrication #compositematerials
This prepreg composite material doesn't cure like you think.
Prepreg (pre-impregnated) means the fabric already has resin in it. Epoxy, vinylester, or polyester. This system uses UV initiators IN the resin, so it only cures when exposed to UV light. You can lay up your part for 2-3 hours without it going off.
Then throw it outside for 5 minutes.
Hard.
Done.
The long working time means you're NOT racing the clock during layup, and UV activation gives you total control over when it cures. Perfect for complex parts where traditional resin systems would kick before you're finished.
--------------------
FREE STUFF
🏆 Free Race Car Parts On Us | Enter the Giveaway
hpcdmy.co/giveaway
🏎 Start Tuning With Confidence | EFI Fuel & Ignition Basics Lesson
hpcdmy.co/EFI101y
💻 How to Tune Stock ECUs Safely | HP Tuners Fuel & Ignition Lesson
hpcdmy.co/hptly
⚡ Motorsport-Grade Wiring Made Simple | Learn Essential Skills
hpcdmy.co/wiringlessonyt
🧑💻 Design. Digitise. Develop. | CAD & 3D Scanning Lesson
hpcdmy.co/learnCADnow
🧰 Engine Building Basics That Matter | Watch Now
hpcdmy.co/eby
🔧 Learn to Align Like a Pro | DIY String Alignment & Setup Guide
hpcdmy.co/aljyt
🛻 Unlock Your Diesel’s Potential | Step-by-Step Tuning Introduction
hpcdmy.co/essential-diesel-knowledge
--------------------
MERCH
👕 Warning: May Cause Random Tech Chats at the Track: hpcdmy.co/merchy
#highperformanceacademy #buildtunedrive #composites #prepreg #carbonfiber #compositefabrication #uvresin #fabrication #carbonfiberfabrication #compositematerials










