Uploaded November 2021 | Updated September 2026, 2 days ago

---

Using a projector to plasma cut metal artwork using my powermax 45 Tips and tricks DIY projects.

Here I will show you how I trace projects using my projector and then plasma cut them. I use a simple projector with android display which allows me to leave my computer at home. These are tips and tricks I have learned over the past few years and hear to share with you. DIY projects made simple.

Plasma cutter used- Hypertherm Power max 45
hypertherm.com/en-US/hypertherm/powermax/powermax45

Model replaced with the XP model.
amazon.com/Hypertherm-Powermax45-XP-Hand-System/dp/B01N1IQ22N
weldersupply.com/P/1638/HyperthermPowermax45XP08

I used the ZTE Spro1 but there was the spro2 which was more current and had way better specs.
Spro1 to old to find any information but ebay still has a few listed.
Spro2
us.amazon.com/ZTE-Spro-Smart-Projector-WiFi/dp/B01AWGYE12

I would get a better projector with more ansi lumen output to get a brighter image. The projector i have is 100 lumens and my other one is close to 2000 lumens.

Well this was a quick and easy diy project.