Using a Magnetic Vise to Reinforce a Heavy Wheel Dolly @ToolsToday
Using a Magnetic Vise to Reinforce a Heavy Wheel Dolly  @ToolsToday
Uploaded September 2026 | Updated September 2026, 3 hours ago
I used the FEIN VersaMAG Vise 160 L to hold a large wheel dolly in place while attaching a 1/4-inch steel plate to reinforce the area where the casters mount. One of the most useful parts of this setup was being able to release the magnetic base, rotate the vise around to the other side, and lock it back into position. With a large, awkward piece like this dolly, being able to reposition the vise that easily made it much simpler to work from both sides while installing the reinforcement plate. All tools used are available from @toolstoday, check them out on our site!
--
FEIN VersaMAG Vise 160 L Magnetic Vise
toolstoday.com/fein-99100001357-versamag-vise-160-l-magnetic-vise-with-jaw-opening-of-6-1-4-and-width-of-6.html
FEIN ASCM 18-4 QM AS 4-Speed 18V Cordless Drill/Driver
toolstoday.com/fein-71161561090-ascm-18-4-qm-as-4-speed-18v-cordless-drill-driver-bare-tool.html
Wera 8100 SB 6 Zyklop Speed Ratchet Set
toolstoday.com/wera-05004046001-8100-sb-6-zyklop-speed-ratchet-set-3-8-inch-drive-metric-29-pieces.html
Sjobergs Elite 2000 Workbench Combo
toolstoday.com/sjobergs-sjo-99402k-elite-2000-workbench-combo-with-sm04-cabinet-and-elite-accessories-kit.html
Using a Magnetic Vise to Reinforce a Heavy Wheel DollyCurved Edge BandingHuge Chamfer in Solid Beam on ShaperNo Fogging and No Dust with Trend AirShield ProFixing My Router MistakeFlush Trimming a LetterCutting Large Rabbet on ShaperFlush Trimming to TemplateTemplate Routing for Juice GrooveThis Sword Makes a Great SquareCordless Jigsaw Cutting Curves in Thick SteelCutting Leather with CNC Machine
ToolsToday |

Using a Magnetic Vise to Reinforce a Heavy Wheel Dolly

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER