Uploaded June 2025 | Updated November 2026, 11 hours ago
Remote access to a LAN switch, to manage the switch, requires the switch to support IP settings much like a host, with an IP address, subnet mask, and default gateway. But then you see the configuration, and it uses a command like βinterface vlan 1β. Whatβs up with that? And, once you understand the config, it begs a few more questions about what a switch does to connect its internal IP logic to the external hosts that seek to manage the switch.
π Matches CCNA Official Cert Guide:
*Volume 1 Chapter 6 Section 2*
This video starts by working through some of those big ideas. It then works through three configuration scenarios to help demonstrate how those big ideas impact the config. The last few topics then look at related IP config, specifically the default gateway and DNS resolver settings.
Itβs a bit of a whirlwind tour of the topic, so follow it with the Configuration Lab as suggested!!
*Chapters*
00:00 Intro
01:37 VLANs and Subnets
04:50 Single VLAN, Single Switch IP Config
08:53 Single VLAN, Multiple Switch IP Config
10:36 Multiple VLAN, Single Switch IP Config
12:40 Using a Default Gateway
15:39 Enabling Name Resolution
19:16 CCNA Study Group Advice
*Related Review Videos*
Config Lab Intro:
π©πΌβπ» youtu.be/zmy8jiktNOw
Config Lab Review:
π©πΌβπ» youtu.be/7Xm9KNK2Z70
========================================
*Product Links*
Product links below. I make a small affiliate sales commission if you buy something!
CCNA Library (Two Book Set):
π ccna.link/nu-cp-lib-ed2
All CCNA products at Cisco Press:
π¨οΈ ccna.link/nu-cp-allccna
All Wendell's products at Cisco Press:
π§πΌββοΈ ccna.link/nu-cp-allwo
Ciscopress.com/NewCerts Page (News, Announcements):
π° ccna.link/nu-cp-newcerts
=========================================
Remote access to a LAN switch, to manage the switch, requires the switch to support IP settings much like a host, with an IP address, subnet mask, and default gateway. But then you see the configuration, and it uses a command like βinterface vlan 1β. Whatβs up with that? And, once you understand the config, it begs a few more questions about what a switch does to connect its internal IP logic to the external hosts that seek to manage the switch.
π Matches CCNA Official Cert Guide:
*Volume 1 Chapter 6 Section 2*
This video starts by working through some of those big ideas. It then works through three configuration scenarios to help demonstrate how those big ideas impact the config. The last few topics then look at related IP config, specifically the default gateway and DNS resolver settings.
Itβs a bit of a whirlwind tour of the topic, so follow it with the Configuration Lab as suggested!!
*Chapters*
00:00 Intro
01:37 VLANs and Subnets
04:50 Single VLAN, Single Switch IP Config
08:53 Single VLAN, Multiple Switch IP Config
10:36 Multiple VLAN, Single Switch IP Config
12:40 Using a Default Gateway
15:39 Enabling Name Resolution
19:16 CCNA Study Group Advice
*Related Review Videos*
Config Lab Intro:
π©πΌβπ» youtu.be/zmy8jiktNOw
Config Lab Review:
π©πΌβπ» youtu.be/7Xm9KNK2Z70
========================================
*Product Links*
Product links below. I make a small affiliate sales commission if you buy something!
CCNA Library (Two Book Set):
π ccna.link/nu-cp-lib-ed2
All CCNA products at Cisco Press:
π¨οΈ ccna.link/nu-cp-allccna
All Wendell's products at Cisco Press:
π§πΌββοΈ ccna.link/nu-cp-allwo
Ciscopress.com/NewCerts Page (News, Announcements):
π° ccna.link/nu-cp-newcerts
=========================================










