Peter Millard | Ultimate Loose Tenon Jig [video 453] @10MinuteWorkshop | Uploaded 3 years ago | Updated 1 hour ago
In this video I make a loose #tenon #jig that duplicates the killer features of the Festool #Domino - narrow and wide slots in a single jig. And yes, I had to go there with that 'ultimate'. đ¤ˇâď¸ Enjoy!
Plans are available on my Etsy here - http://bit.ly/TenonJig
The initial production run of the flat-pack 10MW LTJ is already spoken for. Register your interest for subsequent production here - bit.ly/10MWLTJ_register
.
NB: this is not a pre-order, there is no commitment to purchase; youâre simply adding your name to a list to be notified when available.
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
10 years of Domino P1 youtu.be/7oxd2Qnvyw0
DIY Peanut Jig youtu.be/jhhCnv9rW0M
Strong, or Strong enough? youtu.be/6jRqt1HBHsM
5 Festool gamechangers - youtu.be/R9a1qzLsjFA
+++++++++
If youâre looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My âsocialâ links & contacts in one place - 10minuteworkshop.com/links
Full list of âStuff I useâ at Full list of âStuff I useâ at 10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Strawbyte waste side jigs - http://bit.ly/Strawbyte_jigs
Trend T4 router - amzn.to/3ckBOF8
Spiral upcut bit - wealdentool.com/acatalog/Online_Catalogue_Up_Cut_2_Flute_229.html
18mm guide bush - amzn.to/3oiTchQ (US: amzn.to/341syAM)
Festool centering mandrel - amzn.to/32cYjcc
Festool OF 1010 router - http://amzn.to/2tBmXk9 (US: http://amzn.to/2tigRT6)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
Mirock 500mm T-ruler - etsy.me/365P0KE
Bahco 6â combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
In this video I make a loose #tenon #jig that duplicates the killer features of the Festool #Domino - narrow and wide slots in a single jig. And yes, I had to go there with that 'ultimate'. đ¤ˇâď¸ Enjoy!
Plans are available on my Etsy here - http://bit.ly/TenonJig
The initial production run of the flat-pack 10MW LTJ is already spoken for. Register your interest for subsequent production here - bit.ly/10MWLTJ_register
.
NB: this is not a pre-order, there is no commitment to purchase; youâre simply adding your name to a list to be notified when available.
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
10 years of Domino P1 youtu.be/7oxd2Qnvyw0
DIY Peanut Jig youtu.be/jhhCnv9rW0M
Strong, or Strong enough? youtu.be/6jRqt1HBHsM
5 Festool gamechangers - youtu.be/R9a1qzLsjFA
+++++++++
If youâre looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My âsocialâ links & contacts in one place - 10minuteworkshop.com/links
Full list of âStuff I useâ at Full list of âStuff I useâ at 10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Strawbyte waste side jigs - http://bit.ly/Strawbyte_jigs
Trend T4 router - amzn.to/3ckBOF8
Spiral upcut bit - wealdentool.com/acatalog/Online_Catalogue_Up_Cut_2_Flute_229.html
18mm guide bush - amzn.to/3oiTchQ (US: amzn.to/341syAM)
Festool centering mandrel - amzn.to/32cYjcc
Festool OF 1010 router - http://amzn.to/2tBmXk9 (US: http://amzn.to/2tigRT6)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - amzn.to/2x49HHE (US: amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Mirock square - etsy.me/2MC0RT
Mirock 500mm T-ruler - etsy.me/365P0KE
Bahco 6â combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
![Ultimate Loose Tenon Jig [video 453]](https://i.ytimg.com/vi/IzKHZe0YCGY/hqdefault.jpg "Ultimate Loose Tenon Jig [video 453]
In this video I make a loose #tenon #jig that duplicates the killer features of the Festool #Domino - narrow and wide slots in a single jig. And yes, I had to go there with that ultimate. đ¤ˇâď¸ Enjoy!
Plans are available on my Etsy here - http://bit.ly/TenonJig
The initial production run of the flat-pack 10MW LTJ is already spoken for. Register your interest for subsequent production here - https://bit.ly/10MWLTJ_register
.
NB: this is not a pre-order, there is no commitment to purchase; youâre simply adding your name to a list to be notified when available.
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
10 years of Domino P1 https://youtu.be/7oxd2Qnvyw0
DIY Peanut Jig https://youtu.be/jhhCnv9rW0M
Strong, or Strong enough? https://youtu.be/6jRqt1HBHsM
5 Festool gamechangers - https://youtu.be/R9a1qzLsjFA
+++++++++
If youâre looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My âsocialâ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of âStuff I useâ at Full list of âStuff I useâ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Strawbyte waste side jigs - http://bit.ly/Strawbyte_jigs
Trend T4 router - https://amzn.to/3ckBOF8
Spiral upcut bit - https://www.wealdentool.com/acatalog/Online_Catalogue_Up_Cut_2_Flute_229.html
18mm guide bush - https://amzn.to/3oiTchQ (US: https://amzn.to/341syAM)
Festool centering mandrel - https://amzn.to/32cYjcc
Festool OF 1010 router - http://amzn.to/2tBmXk9 (US: http://amzn.to/2tigRT6)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6â combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![[AD**]In this one Iâm taking a look at the new G2 guiderails from @evolutionpowertools](https://i.ytimg.com/vi/JyNR3C8k6PQ/hqdefault.jpg "[AD**]In this one Iâm taking a look at the new G2 guiderails from @evolutionpowertools
[AD**]In this one Iâm taking a look at the new G2 guiderails from @evolutionpowertools")
![I Make A Compact And Comfortable Stool For All Ages! [video 576]](https://i.ytimg.com/vi/KDe7ZQO83mE/hqdefault.jpg "I Make A Compact And Comfortable Stool For All Ages! [video 576]
In this one Iâm making a smaller stool for kids that works for adults too, and all made from some plywood offcuts and fibracolour scraps. Enjoy!
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
10MW Router MultiJig: one jig, many uses⌠- https://youtu.be/V-K4rnD085o
Our Big Build series coming soon; watch the âNo Going Backâ introduction here -
Birch Ply Alternatives - https://youtu.be/-injtkjghA8
5 Fake Joints - https://youtu.be/V1nWpH6EyL4
CSC SYS 50 12 months on - https://youtu.be/T5_9DQJC4v8
10 years of Domino - https://youtu.be/7oxd2Qnvyw0
Dowel Jig Basics - https://youtu.be/zTj_hiEVfvw
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
My 6 Top Tapes - https://youtu.be/zj_IKd8XYNI
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Confirmat screws 7 x 70 - https://amzn.to/4bZs6UL
Confirmat screws 7 x 50 - https://amzn.to/45qcJCj
Fisch 5mmm lip & spur / brad point bit - https://amzn.to/4aNq9th
Fisch 8mm lip & spur / brad point bit- https://amzn.to/4e6tKFN
KWB Drillblock - https://amzn.to/3V8IhrW
Tailorsâ awl - https://amzn.to/4aBHCVx
Bessey DuoKlamp - https://amzn.to/3eDz1Ig
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
BicMatic Fine point 0.5mm pencils - https://amzn.to/3uldrlX
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs carpenters square (Gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?_pos=1&_sid=4a2a8233f&_ss=r&ref=1x_p0bagtnr
Benchdogs CSC SYS Fence (gifted) - https://benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr")
![Cabinetry Basics Part 2 - Screws or Nails? [video 436]](https://i.ytimg.com/vi/LPGH_BhIzZg/hqdefault.jpg "Cabinetry Basics Part 2 - Screws or Nails? [video 436]
I get a lot of questions about cabinet and carcass construction and in this series I aim to answer them all; in Part 1 I discussed the fundamentals of construction, and here in Part 2 Im going through the most basic methods of joining the sides to the top & base - but should that be screws, or nails?
Part 1 of this series is here - https://youtu.be/3N_T-YpkBCg
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from the legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If youâre looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My âsocialâ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of âStuff I useâ at Full list of âStuff I useâ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Mentioned in this video:-
Peanut 2 connector system - http://shop.intelligentfixings.com?ref=10minuteworkshop
Buttonfix - https://amzn.to/2JIXa35 (US: http://bit.ly/buttonfix_US)
Benchdogs Rail Dogs - http://bit.ly/raildogs
Trend MFT router jig - https://amzn.to/34wSp3b
Benchdogs rail square - https://bit.ly/bench-dogs
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
++++++++
Other useful gearâŚ
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)
Trend Air Stealth Facemask - https://amzn.to/2zah0P6 (US: https://amzn.to/2T5ww6X)
Bahco 6â combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)")
![Parkside 12v Planer, Mini Grinder, Drill/driver [Video 529]](https://i.ytimg.com/vi/M3ySQVRr-iM/hqdefault.jpg "Parkside 12v Planer, Mini Grinder, Drill/driver [Video 529]
In this one I take a look at the ÂŁ40 12v Parkside planer from Lidl that looks a lot like the 12v Bosch (at a quarter of the price) along with a ÂŁ20 mini grinder and ÂŁ17 drill/driver that are also on the Parkside 12v battery platform - which also looks uncannily like the BoschâŚ
Iâve put this video out a little off-schedule as these are in Lidl stores now, and once theyâre gone theyâre gone. Iâll have some early thoughts on the Festool Systainer saw out next, then the 32-year-old Ikea Billy bookcase home office up-cycle project after that.
Subscribe to make sure you donât miss a thing right here - http://bit.ly/10MWsubscribe
+++++++++
Dave at Grumpys workshop did a video on the drill/driver a while back, here - https://youtu.be/0gkcYJsqqME
Follow Adam @the_welsh_woodworker on Instagram - https://www.instagram.com/the_welsh_woodworker/
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Birch Ply Alternatives - https://youtu.be/-injtkjghA8
Scribing an infill - https://youtu.be/g0W23buOgoE
Scribing a Face-frame - https://youtu.be/c2IthMh47nM
Scribing to a ceiling - https://youtu.be/nba3yyJYqpM
Kreg hinge jig - https://youtu.be/0wQMkWb4DjU
Painting MDF doors - https://youtu.be/ZIwNJGlVtwc
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Handy consumables & gear:-
Browse the Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
+++++++++")
![$15,000 Dumpster? Breaking Ground On Our Kitchen Renovation. [Ad][video 579]](https://i.ytimg.com/vi/MNleO7MwrhY/hqdefault.jpg "$15,000 Dumpster? Breaking Ground On Our Kitchen Renovation. [Ad][video 579]
Click here - http://www.hellofresh.co.uk/WORKSHOP60 to enjoy an exclusive offer of 60% off your first box, a 20% discount for the following two months and FREE dessert for life! Alternatively, you can use the code âWORKSHOP60â. This special offer is available for new customers as well as those who cancelled their subscription twelve months ago or more. #ad **Terms and conditions apply; see website (or below) for details
In this one we get into the details of our kitchen extension and ground floor renovation, and show you how some simnple planning can save you thousands!
Taking on a build like this? Sign up to the Our Big Build newsletter segment to stay in touch at https://tenminuteworkshop.myflodesk.com/ourbigbuild
Table of Contents:
00:00 Intro & recap
00:39 Foundations dug
01:57 Skips & dumpsters
03:05 Lower the floor
04:30 Hello Fresh
06:07 Kitchen design
06:31 Drains
07:11 Foundations poured
08:12 Wall demolition
09:19 Steel up, walls down
09:52 Preview & outro
Related content:
Other videos and playlists of interest:-
No going back (Our Big Build primer) - https://youtu.be/eULepp_7CIM
Making Plans (Our Big Build 2) - https://youtu.be/Gd9RVXruLbk
One Smaller Stool [video 576] - https://youtu.be/KDe7ZQO83mE
10MinuteWorkshop Router MultiJig - https://youtu.be/V-K4rnD085o
DIY drilling Guide - https://youtu.be/TglP1kHDjSw
6 Top Tapes - https://youtu.be/zj_IKd8XYNI
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Aircraft grade plywood inserts - https://youtu.be/kA-LswBI_oY
Oak and Birch Ply drawers - https://youtu.be/tIbJ-93TMZw
Sharp and a little bit Scary - https://youtu.be/EBJZlI9IVlI
Bargain or Burden; first look at Wolfcraft âMFTâ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft âMFTâ) - https://youtu.be/3qCU8dzIJ_c
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Useful links:
Duo design and architecture - https://duo-architecture.co.uk
Project 1 Design and Build - https://www.project1db.co.uk
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Details on planning permission UK - https://www.planningportal.co.uk
Party walls and building works - https://www.gov.uk/party-walls-building-works
RIBA Find an Architect - https://www.architecture.com/working-with-an-architect/how-do-i-find-an-architect
Average building costs estimator - https://buildpartner.com/average-building-costs-per-sq-m-for-2024-a-uk-guide/
**Terms and Conditions: This offer entitles you to 60% off your first box, and 20% off your next seven boxes when ordered in consecutive weeks during your first two months as a HelloFresh customer. One voucher per customer and household. Must be 18 or over. You can select one dessert from 3 Gu dessert options each week following checkout. Dessert options are provided subject to availability and at the sole discretion of HelloFresh. Once redeemed you will be signed up to a flexible rolling weekly subscription. Valid for UK residents only (including Jersey, Guernsey & Isle of Man), excluding Scottish Highlands and Islands. Valid in Ireland too, discount may vary.")
![Tracksaw Dovetails [video 496]](https://i.ytimg.com/vi/NHmwoe6S9vQ/hqdefault.jpg "Tracksaw Dovetails [video 496]
In this video I have a go at making #dovetails with a #tracksaw, and just to complete the silliness I use MDF and #plywood, too. Enjoy!
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Videos mentioned / of interest:-
Little Plywood boxes - https://youtu.be/qg1jdYy0QTE
Workshop wins; benches - https://youtu.be/XVSp9yDmGYM
Ikea Curtain-track MFT - https://youtu.be/223QALIbnRc
Festool or Mafell https://youtu.be/5kqui1b0SbU
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Torsion box router bench - https://youtu.be/Q-Vyq4ShHT0
Plywood shelves, a basic build - https://youtu.be/gNobuRCBr_Q
Basic Plywood Boxes - https://youtu.be/li5AIXw3XPE
Torsion box router bench - https://youtu.be/Q-Vyq4ShHT0
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
+++++++++
If youâre looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My âsocialâ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
White pencil:-
Staedtler 0.9 mechanical pencil https://amzn.to/3O7Hgva
0.9mm White leads - https://amzn.to/3a7T3e8
As a Benchdogs UK affiliate I may earn from qualifying sales; use the offer code â10minuteworkshopoâ for a 5% discount across the board at Benchdogs.co.uk.
Benchdogs carpenterâs square - https://benchdogs.co.uk/products/175mm-carpenter-square?ref=1x_p0bagtnr)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6â combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Sautershop Shelf-pin jig [**Gifted/**AD][video 457]](https://i.ytimg.com/vi/Nw0ssJZ5yYg/hqdefault.jpg "Sautershop Shelf-pin jig [**Gifted/**AD][video 457]
In this video I take a look at the MFS 3203 Milling Template from Sautershop, and discover it has a trick or two up its sleeve that makes it a step up from your typical shelf pin jig. Enjoy!
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video or say nice things about the product; as an affiliate I may earn from qualifying sales. If you decide to make a purchase after viewing this video (link below) include â10minuteworkshop sent meâ in the comments section when ordering to receive a free goody bag.
Sautershop MFS 3202 Milling Template - https://bit.ly/3ujqfnS
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
SauterShop variobench https://youtu.be/0Cs092FZW3U
Recent popular videos:-
Lidl Parkside plunge saw 2021 - https://youtu.be/kFyDGdH66HM
Ultimate DIY loose-tenon jig - https://youtu.be/IzKHZe0YCGY
Cabinetry basics P1 - https://youtu.be/3N_T-YpkBCg
Old House New Window https://youtu.be/oMVpiBlu110
+++++++++
If youâre looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My âsocialâ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of âStuff I useâ at Full list of âStuff I useâ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Sautershop MFS 3202 Milling Template - https://bit.ly/3ujqfnS
Shelf pin template [similar] - Shelf pin template - https://amzn.to/3102B32 (US:[similar] https://amzn.to/2TvqVJG)
LR 32 complete set - https://amzn.to/2HfhZlW (US: https://amzn.to/2ThV1N6)
LR32 sled - https://amzn.to/2TdqhNk
LR32 rail - https://amzn.to/2INDt9G
Alternative (Kreg) shelf-pin jig - https://amzn.to/2NUwKru (US: https://amzn.to/2D2Vj4y)
Festool OF 1010 router - http://amzn.to/2tBmXk9 (US: http://amzn.to/2tigRT6)
Festool 8mm collet - https://amzn.to/3kkkL7H (US: https://amzn.to/37wDx8k)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Dowel jig bare (similar) - https://amzn.to/3bS5Oqu
8 x 30mm dowels - https://amzn.to/38yb16J (US:[3/8th] https://amzn.to/2KJAKQ5)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6â combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![10 Years of Domino Part 2 [Video #271]](https://i.ytimg.com/vi/OJaVpnCfcLc/hqdefault.jpg "10 Years of Domino Part 2 [Video #271]
10 Years of Domino Part 2 [Video #271]")
![I Make 3 Drawers - no tape, no ruler. [video 508]](https://i.ytimg.com/vi/ObR9kbXu8PQ/hqdefault.jpg "I Make 3 Drawers - no tape, no ruler. [video 508]
In this longer video Iâm back on the #BasicBuild series and making three #drawers to fit into our storage #cubes and just to make life interesting Ill be doing it without a tape measure or a ruler. Enjoy!
Basic build videos are just that - simply constructed projects from readily available materials using a minimal - and entry-level - toolset (list below) and with each build we add a tool - or two - that grows the scope of the work we can take on.
Check out the basic builds playlist here - https://bit.ly/BasicBuilds
I used Finsa Fibracolour for the drawer fronts, and thanks so much to FinsaUK for the larger than usual samples.
For Fibracolour cut to size see https://www.cutmyplastic.co.uk/wood-sheets/mdf/finsa-fibracolour-ez/red/L300-W100/
Or contact @FinsaUK on Instagram for stockists - https://www.instagram.com/finsauk/
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Basic Builds playlist - https://bit.ly/BasicBuilds
Storage Cubes - https://youtu.be/Gyv-oGKRF30
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Plywood shelves - https://youtu.be/gNobuRCBr_Q
Little Plywood Boxes - https://youtu.be/qg1jdYy0QTE
Drill Press Table - https://youtu.be/9w-MtpmBUWs
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
DIY MFT follow-on - https://youtu.be/wyGNs1GYdCk
Dave Stantonâs Dog Stop video here - https://www.youtube.com/watch?v=GWcdI5aBB_M
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
Parkside or Macallister Plunge Saw? - https://youtu.be/Ebm-EEXNZHE
All my tracksaw-related videos are in a playlist here - http://bit.ly/TracksawWorkshop
New to the MFT or MultiFunction Table? Hereâs a couple of explainers:-
Festool MFT - https://youtu.be/0V-p5F7SjO4
MFT follow-on - https://youtu.be/RxcVY8ZR2fQ
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Note that prices fluctuate - some have risen since I made my purchases.
The Basic Build toolset comprises:-
Heavy duty spring clamps - https://amzn.to/2Rw0b5u (US:similar) https://amzn.to/2qSwgZV)
Silverline sander - https://amzn.to/3QmUnKs
F clamps from Rutlands, pack of 10 300 x 80mm - I paid about ÂŁ40 for mine âon specialâ - https://www.rutlands.com/sp+workholding-f-g-clamps-f-clamps-malleable-cast-iron-f-clamps-malleable-cast-iron-f-clamps-300mm-x-80mm-pack-of-10-rutlandsÂŽ+r3037x10
Cheap chisels [similar] - https://amzn.to/3NFmCTm (US: [similar] https://amzn.to/386DYZ4)
Twist drill set from Rennie Tools; use the offer code 10MINUTEWORKSHOP for a 5% discount at Rennie Tools - https://www.rennietool.co.uk?aff=2
Macallister plunge saw - available in the UK from B&Q stores at diy.com
10.8v drill/driver [similar] - https://amzn.to/3tQAEJ0
20mm conduit - https://www.toolstation.com/20mm-heavy-duty-pvc-round-conduit/p71029
Strawbyte waste side jigs - http://bit.ly/Strawbyte_jigs
Other handy consumables & gear:-
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Finsa Fibracolour cut to size - https://www.cutmyplastic.co.uk/wood-sheets/mdf/finsa-fibracolour-ez/red/L300-W100/
Guiderail connector [similar] - https://tools4trade.co.uk/products/excel-universal-guide-rail-connector
O3Adhesive CA glue - https://amzn.to/3Fubfw0
O3Adhesive Accelerator - https://amzn.to/3zwtehH
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6â combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
