u-blox - NORA-B201 Evaluation Kit - Unboxing | DigiKey @DigiKeyProductDiscovery
u-blox - NORA-B201 Evaluation Kit - Unboxing | DigiKey  @DigiKeyProductDiscovery
Uploaded July 2026 | Updated November 2026, 3 hours ago
We take a look at the NORA-B201 Evaluation Kit from u-blox, combining an efficient and powerful MCU with a Bluetooth LE radio for ultra-low power IoT applications.

Inside the box, you’ll find the evaluation board with the NORA-B201 module, a USB-C cable, a 2.4 gigahertz dipole antenna, and an NFC antenna.

The NORA-B201 module is based on the Nordic nRF54 series SoCs and is an open CPU solution that allows customer applications to run on the Arm Cortex-M33 CPU, so in this demo we’re going to program a Zephyr RTOS blinky demo using the Nordic NRF Connect extension in Microsoft VS Code.

Install the antennas on their respective u.FL and NFC connectors. You can also install additional hardware using the two mikroBUS sockets or the Qwiic connector. Use the USB-C cable to connect the board to your computer.

In VS Code, you’ll need to install the nRF Connect extension pack. Once installed, open the nRF Connect tab and install the latest SDK. This will include the toolchain, so you don’t need to install that separately. Then click browse samples, type in blinky, and select the option with Zephyr in the path. Next we need to add a build config. In the board target box type in NORA and select the nRF54L15 version. Then build it and flash it to the board.

digikey.com/en/products/detail/u-blox/EVK-NORA-B201/26190060

digikey.com/en/product-highlight/u/u-blox/nora-b2-stand-alone-bluetooth-low-energy-modules

Maker.io - digikey.com/en/maker
DigiKey’s Blog – TheCircuit digikey.com/en/blog
Connect with DigiKey on Facebook facebook.com/digikey.electronics
And follow us on X https://x.com/digikey
u-blox - NORA-B201 Evaluation Kit - Unboxing | DigiKeySamtec – Ultra Micro Blade and Beam Fine Pitch Connectors – PTM | DigiKeyEconoPACK™ 3 TRENCHSTOP™ from Infineon PIO | DigiKeyCSS4C-1216 Series Four-Terminal Shunt Resistors from Bourns - PIO | DigiKeyFiberQuad Ruggedized Quadrax Contacts from Amphenol Aerospace PIO | DigiKeyMSPM0L111x Mixed-Signal MCUs from Texas Instruments PIO | DigiKeyECS-TXO-16CSMV4 Clipped Sine Wave MultiVolt TCXO from ECS PIO | DigiKeyBanner Engineering K100 Programmable Display Beacon - Unboxing | DigiKeyPI3EQX64904 64 GT/s PAM4 4-Channel PCIe 6.0 Linear ReDriver from Diodes PIO | DigiKey2nd Generation High-Temp SMD LED Series from Kingbright PIO | DigiKeyPNB6040913 ABS Enclosure from Bud Industries PIO | DigiKeyUse a MOSFET to drive load from a 3.3 VDC Arduino #programming #controlsystems | DigiKey
DigiKey Product Discovery |

u-blox - NORA-B201 Evaluation Kit - Unboxing | DigiKey

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER