Uploaded June 2017 | Updated September 2026, 28 minutes ago
Designed for long, large print jobs, the Ubis 13HF (high flow) is a dual-core workhorse. This hot end will ship standard with a 0.75mm nozzle, but for a limited time, we are offering three additional sizes for you to try out; 0.4mm, 1.5mm, and 2.0mm. Recommended:
Recommended: When swapping nozzles, Carl Ubis recommends using a Silicone Thermal Compound to seal the threads. Click here for an example of thermal compound.
A couple of quick notes. The current Plus is not compatible with this hot end. There is not enough threading on the Auto-Leveling Probe to allow for space for the longer hot end. Not to worry, we will have a solution for this soon. Also, if you have a Simple Pro or recently added a 50mm blower fan and printable shroud, this hot end will not fit the same as your current 13S. You will have to remove your current blower fan shroud.
printrbot.com/shop/ubis-13hf-hot-end
Designed for long, large print jobs, the Ubis 13HF (high flow) is a dual-core workhorse. This hot end will ship standard with a 0.75mm nozzle, but for a limited time, we are offering three additional sizes for you to try out; 0.4mm, 1.5mm, and 2.0mm. Recommended:
Recommended: When swapping nozzles, Carl Ubis recommends using a Silicone Thermal Compound to seal the threads. Click here for an example of thermal compound.
A couple of quick notes. The current Plus is not compatible with this hot end. There is not enough threading on the Auto-Leveling Probe to allow for space for the longer hot end. Not to worry, we will have a solution for this soon. Also, if you have a Simple Pro or recently added a 50mm blower fan and printable shroud, this hot end will not fit the same as your current 13S. You will have to remove your current blower fan shroud.
printrbot.com/shop/ubis-13hf-hot-end
