In this video I go over the basic design and features of my bicycle framebuilding fixture. This tool is used to hold the discrete parts of the bike frame for welding, brazing, epoxy bonding, or otherwise fabricating a bicycle.
I talk about the features, show how slick it is, and explain how it is used and what is involved when using it. You can read more about it at http://cobraframebuilding.com. Reach out to me to talk more about it and get one for your shop: joeroggenbuck@gmail.com.
In this video I go over the basic design and features of my bicycle framebuilding fixture. This tool is used to hold the discrete parts of the bike frame for welding, brazing, epoxy bonding, or otherwise fabricating a bicycle.
I talk about the features, show how slick it is, and explain how it is used and what is involved when using it. You can read more about it at http://cobraframebuilding.com. Reach out to me to talk more about it and get one for your shop: joeroggenbuck@gmail.com.How We Engineered an Even better Bike Framebuilding FixtureCobra Framebuilding2024-01-11 | I wanted to share some of the details that we have updated and addressed on The Creator Frame Fixture for Bicycle Framebuilding.
Over 3 years and 100 fixtures sold, a lot of details have changed and for the better.
The new Bottom Bracket Wing Stud - The Big Winger - removes the need for the 6mm Allen wrench. It's one less thing to run after while building a bike.
The Millimeter scales are better now - easier to field install, more accurate, better looking, and more durable.
The way that we package it for shipment is more secure and saves the customer a lot of money on the cost to ship.
The tube-holder supports are updated and expanded for more uses and better usability.
The Dummy Axle Holder locks up better and has integrated mounts for the Stay Tip Holders.
Even little details like the Main Extrusion Caps are updated for better performance and cosmetics.
We keep the frame fixture in stock and ready to ship. Reach out today with any questions you may have or to order your own.
0:00 Intro 0:21 Three Years/100 Sold 0:50 Big Winger 1:41 Millimeter Scales 3:05 Packing/Shipping Optimization 5:15 Updated Holders 6:08 Added Front Holders 7:29 Updated Rear Holders 9:26 Updated DA Holder 10:34 Updated Extrusion Caps 13:34 Like and Subscribe ;)Miter & Weld a Chainstay Sub-Assembly with the Stay SlayerCobra Framebuilding2023-09-25 | The Stay Slayer from Cobra Framebuilding can be used for a variety of Mitering tasks when building bicycle frames, but it can also be used as a welding fixture in some cases.
Here we are showing the process of mitering and then welding the tubes without removing them from the fixture. This is a sub-assembly process and it's a pretty cool workflow. After these steps you have the heart of the bike frame. It's a really good way to start your build.
You can learn more about the Stay Slayer at our website.
cobraframebuilding.com/product/the-stay-slayerRolling Stand Base For The Creator Bike Frame Fixture - Build OR Buy ItCobra Framebuilding2023-03-24 | We've engineered the rolling stand base to go with our frame fixture. It's not rocket science to build your own and it could save you a lot of money so we're making the part prints, bill of materials, and laser cut plates available.
Follow this link for all of the free information and parts we sell: cobraframebuilding.com/fixture-stand-resourcesSay Hello To The Stay Slayer - Seatstay and Chainstay Mitering Fixture - From Cobra FramebuildingCobra Framebuilding2022-12-14 | Today we're talking about the new Seat Stay and Chain Stay mitering fixture from Cobra Framebuilding.
Toss some tubes in this tool and toss it on your milling machine. Using a hole saw you can miter / notch / cope the tubing to fit together. Building bicycles is challenging and the rear end of the bike is much harder than the front. Take advantage of all of the great features and capability of this tool in your shop.CNC Machining Titanium Chain Stay Yokes for Custom Bike Frames | FramebuildingCobra Framebuilding2022-10-24 | In this video we take a plate of raw titanium and transform it into a pile of shiny parts. These are our Sidewinder V10 and V11 Titanium Chainstay Yokes for custom bike frame builders.
First we have to saw the plate up using the Clausing C12AX automatic horizontal band saw. What a machine! It's still a lot of steps because it's plate and not flat bar stock with 2 outside dimensions already where we want them.
Next we load a new endmill in a shrink fit toolholder. I show my DIY induction heater for this process.
Then we load the raw stock into my Pierson Rotovise for Op1. I did the best I could to get good shots of the machining, but it's tricky!
Then the parts are loaded into the Op2 fixture for the last bit of machining.
Follow along on Instagram @cobraframebuilding and subscribe to the Shut Up and Build Bikes Podcast while you're at it.First Impressions Welding Titanium Tubing - Can We Just Figure It Out!?Cobra Framebuilding2022-07-08 | Zack is a competent TIG welder, but Titanium welding is a new frontier. Often the best way to learn anything new is to just dive in. Zack isn't ready to weld out an entire Ti bike just yet, but his first welds are promising and hopefully this glimpse into his learning curve helps you lose the intimidation and give it a shot.
You can check out the tools showcased in the video on our webstore. The Miter Buddy was useful for holding 3/4" (19mm) and smaller tubing for mitering. cobraframebuilding.com/store/p/miter-buddy The Miter Daddy was useful for holding the larger tubing for mitering. cobraframebuilding.com/store/p/the-miter-daddyThe Creator Fork Fixture by Cobra Framebuilding - Product Overview and SpecsCobra Framebuilding2022-05-31 | In this video I'm outlining the features and benefits of The Creator Fork Fixture.
We'd love to be part of your framebuilding journey.22 Reasons to Build Your Own Custom Bicycle ForksCobra Framebuilding2022-05-26 | Building custom bicycle forks is awesome and you should absolutely do it. Here's why!
Every Creator Frame Fixture comes ready to accept the fittings in this kit, and the install is very simple. If you follow all of the steps in this video you'll have the hose and manifold routed super neatly.
You can learn more about The Creator Frame Fixture here: cobraframebuilding.com/store/the-creator-frame-fixtureSet Up On The Cobra Creator Framebuilding FixtureCobra Framebuilding2022-01-16 | The Creator Frame Fixture is designed to be fast and easy to set up for your frame's geometry. With only five output variables in Bike CAD you can set up the fixture in under a minute and begin loading frame components.
I talk about what these variables are, how to find them in Bike CAD, and how the fixture adjusts with them.Framebuilding Check-In: Our In-Process Builds, The Creator Frame Fixture In UseCobra Framebuilding2021-09-03 | After hours at Cobra Framebuilding HQ, we've been building some cool, custom steel bike frames.
Joe is building a hybrid bike for his girlfriend. It's pretty solid and simple. It won't impress any weight weenies or parts snobs, but it allows her to get on a better-fitting bike and Joe can practice the craft of framebuilding, which he loves.
Zack is building himself a new hardtail MTB. 29 x 2.5" tires, boost spacing, 130mm fork, and a 31.6 x 170mm dropper seat post. Zack wanted to bend a bunch of the tubes and get to know the Cobra Toob Bender, too, so that's what he did.
Make sure to subscribe so you can see updates on these bikes as we develop and finish them.Cobra Framebuilding Machine Shop Tour | July 2021Cobra Framebuilding2021-07-21 | I moved my machine shop into this industrial warehouse space just outside of Grand Rapids, Michigan almost a year ago. It's a much larger and nicer setup than what I had in my 2019 shop tour video, and I figured it was time for an update!
Timestamps: 0:00 Introduction 0:32 Lista Cabinets 1:58 Shipping Area 2:58 Zach's Desk 4:58 3D Printer 6:34 Assembly Bench 8:41 Forklift 10:14 TIG Welding Area 14:32 Material Storage 15:26 Bandsaw 20:19 Belt Sander Setup 21:49 Frame Fixture 23:47 Granite Table 27:09 CNC Lathe 32:08 CNC Mill 37:13 Hallway 39:22 Workbench 41:57 Load Center 42:43 The "Living Room" 44:33 Bathroom / Kitchenette
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding5 Benefits of The Creator Frame FixtureCobra Framebuilding2021-07-13 | Let's talk about 5 things The Creator Frame Fixture offers that most other frame fixtures don't. For more on The Creator:
- Email me with your questions about the fixture and whether it's right for you: joe@cobraframebuilding.com.
Subscribe for more videos on bicycle framebuilding and bicycle framebuilding tools, including more videos on frame jigs.How It Works: The Bench Mount Stand for The Creator Frame FixtureCobra Framebuilding2021-07-07 | Today, we're looking at the bench mount stand for The Creator frame fixture. It comes standard with The Creator, and there's a lot of interesting engineering that goes into it. I talk about both the user experience and the details of how it was designed.
Email me with your questions about the fixture and whether it's right for you: joe@cobraframebuilding.com.The Bottom Bracket Adapter System on The Creator Frame FixtureCobra Framebuilding2021-07-01 | Today we're looking at the bottom bracket adapter system on The Creator Frame Fixture. This system allows for massive versatility in the kinds of bikes you can fabricate—all with the same fixture.
Read more about The Creator Frame Fixture here: cobraframebuilding.com/store/the-creator-frame-fixtureHow to 3D Model a Bike Frame in Fusion 360 (Parametric Design)Cobra Framebuilding2020-04-02 | Today I'm showing some of the potential for 3D modeling bike frames using CAD software like Fusion 360.
I've made some other videos about BikeCAD, and while I LOVE and recommend BikeCAD, there are some additional things you can do with 3D CAD software like Fusion 360—specifically by using parameters.
I hope this demonstration might pique your interest to explore this software more if you're new to it!
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.This Shop is a Framebuilders Dream | Engin Cycles Shop TourCobra Framebuilding2020-01-16 | Today I finally release my Engin Cycles shop tour with Drew Guldalian! Drew was nice enough to give me this tour back in November when I visited for the Philly Bike Expo. He has the coolest bicycle framebuilding shop I've ever seen.
Drew not only has several dedicated horizontal and vertical mill setups for different steps in the framebuilding process, he also has a Sputnik frame jig, multiple CNC machines, lathes, and all kinds of other little machines and tools.
If you want some inspiration for what a fully built out framebuilding shop can look like, I think Drew's shop is one of the best places to look. So stoked I got to record this shop tour!
Outro music by Urpleactus: urpleactus.bandcamp.comHow to Move a Bridgeport Milling MachineCobra Framebuilding2019-11-13 | Today I'm moving my Bridgeport vertical milling machine out of my shop in Syracuse, NY, and I'm taking it all the way to New York City. Follow along as I show the process I use for moving heavy machine tools like mills and lathes.
First, I lift up the mill to build a pallet underneath it. Then, I slide a pallet jack under the mill, and I pull it onto a trailer. I like the drop-deck trailer I show in the video. Then I also use a come-along tool to pull the Bridgeport onto the trailer. Then I just strap it down with ratchet straps.
Warning: Moving a milling machine on your own is dangerous, serious work. In this video, I show my process for doing it. But I make no claim that it's safe to do this yourself.
Time to paint my mountain bike frame—with spray paint. I'm calling the theme "Midnight Snake." It's black with salmon and turquoise accents. Watch as I paint the bicycle and then apply a Cobra Frames head badge, too.
I got the paint from Spray.Bike. I'm a big fan of Squid Bikes (squidbikes.com), and they do all of their wacky paint jobs with Spray.Bike spray paint. So I reached out, and Spray.Bike sent me a few rattle cans for this video. So they're officially the video sponsors; check 'em out: spraybike.us
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.How to Prep a Bicycle Frame for PaintingCobra Framebuilding2019-09-17 | Today I prep my steel mountain bike frame for painting. Since I don't have a sandblaster to prep the frame in the optimal way, I'm using Emory cloth to sand down the surface of the frame. Then I'm cleaning off any oils with grease and wax remover. Then I'm spraying primer.
After what I show in the video, I'm going to go over the frame with some Scotch Brite and then spray another coat of primer. Then in the next video, we'll do the wacky multiple-color spray paint job using spray.bike! Who's excited?
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.Dropper Seatpost Internal Cable Routing | MTB Frame BuildCobra Framebuilding2019-09-06 | This week on the mountain bike frame build, I'm doing the internal cable routing for my dropper seatpost. Truly, I should have done this cable routing step earlier—it would've been a lot easier. But I didn't. So you get to watch me hack my way through it.
Dropper seatposts are relatively new, and there's no single agreed-upon standard for how to route the cable. The cable needs to end up INSIDE the seat tube. I decided to replicate what I've seen some other steel frame builders do: I brazed on a little reinforcing patch (cut from another steel bicycle tube), and then I made a hole in that reinforced area for the cable to pass into the seat tube. So the cable will come down on the down tube and then pass into the seat tube through that hole, and meet the bottom of the dropper seatpost in there.
This was a difficult task with the seat tube already welded into the frame and without the right set of tools at my disposal. In the end, I tried a few different tools to get the job done—drill, end mill, hand files, and Dremel.
At the end of the video, I also talk about what I'm doing for paint. I'm using some rattle cans from Spray Bike. They were nice enough to give me these cans free as a sponsor, so check them out: spraybike.us
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.How to Ream a Bicycle Head Tube and Seat TubeCobra Framebuilding2019-08-28 | It's time to do some reaming, facing, and slotting on my mountain bike frame! First, you'll see me ream and face the head tube, then I ream the seat tube, and then I slot the seat tube.
So, for the head tube reaming and facing, I'm using a Park Tool head tube reamer/facer. In case you're not familiar with it, I give some background on the Park Tool reamer/facer, then I show the process for how to get a nice full clean up and make sure the headset will fit snug inside.
For the seat tube reaming, I used an adjustable reamer with straight blades that I'm actually not a huge fan of—but it was affordable. I also talk in the video about why helical reamers are better for seat tube reaming if you can afford one.
For the seat tube slotting operation, I use a homemade seat tube slotting tool that I made based on one I saw Drew Guldalian from Engin Cycles using.
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.Oops! Fixing a Mistake I Made on My MTB FrameCobra Framebuilding2019-08-22 | After I posted photos and videos of my brazing last week, I got an interesting message from my buddy Adam Sklar (Sklar Bikes). He had seen that I silver brazed in my seat stay bridge. He said, "You don't wanna do that."
As I explain in this video, Adam has a ton of relevant experience on this. So even though I know that a lot of great bicycle framebuilders DO silver braze their seat stay bridges, I decided to go with his advice.
So in this video, I'm removing the seat stay bridge, cleaning up the stays, and then TIG welding it back in. I show this whole process, so you can see how to undo your mistakes—at least if your mistake is silver brazing in something you shouldn't have.
While I've got the TIG welder out, I also weld on the ISO brake tab that I fit up in a previous video, along with the brace tube to reinforce it. Just a few more steps now, particularly with the finish machining, and we'll be ready to paint this bike frame!
MUSIC: Inossi - Stories (soundcloud.com/inossi) Waywell - Feather (soundcloud.com/waywell) Urple Actus - Sunshine (soundcloud.com/urpleactus)Brazing 101: Adding Braze-ons to a Steel Bicycle FrameCobra Framebuilding2019-08-18 | Today I'm silver brazing a seat stay bridge, cable guides, cable stops, and water bottle bosses (a.k.a. braze-ons) onto my mountain bike frame—and taking you along for the ride!
I show a lot of the brazing up close, sharing tips about what to watch for to make sure you don't cook the joints and burn up the flux. I also share my thoughts about where I'm placing the braze-ons on the bike and why. At the end I discuss some tips for cleaning the flux off the frame.
This video does cover some of my overall equipment choices when silver brazing and my setup. However, for a full overview of my brazing setup for bicycle framebuilding, check out this video: youtube.com/watch?v=MEyrrLEq-lg
For this bike, I'm using an ISO disc brake tab, believe it or not. In the video I explain why I chose to use the ISO standard instead of post mount or flat mount. (Partly it's just because I already have a good tool for adding ISO brake tabs; it's Anvil Bikeworks' lSO Rear Disc Brake Tab Fixture, aka “Feng Shui.")
I show a bunch of the process of grinding the disc brake tab to fit up against the seat stay. First I was using a disc brake tab from Nova Cycle Supply. Then I botched that one, so I used one from Paragon Machine Works. I was using my new Metabo angle grinder, and I was really having too much fun removing the material.
Toward the end of the video, I miter the seat stay bridge. For this, I use a DIY framebuilding tool based on a design by Sputnik Tool. I really think this setup is slick for mitering the seat stay bridge.
This video covers the tack welding and finish welding. It was a HOT day for TIG welding, and my biggest struggle was just finding the right position to get at the work and comfortably weld them seat stays.
My apologies if some of the steps in this frame build series are a little repetitive. Of course, a lot of the steps for TIG welding seat stays are going to be similar to TIG welding the chainstays and other tubes. But I hope you enjoy seeing the whole build as it progresses.
Next, I'll be adding a seat stay bridge and a brake tab!
MUSIC: Urple Actus - Landing (soundcloud.com/urpleactus) Joakim Karud - Rock Angel (soundcloud.com/joakimkarud) Muciojad – Before I Sleep (soundcloud.com/muciojad) Urple Actus - Please Hold (soundcloud.com/urpleactus) Muciojad - Troubleshooter (soundcloud.com/muciojad)Here We Go! Bending Seat Stays and Mitering | MTB Frame BuildCobra Framebuilding2019-07-24 | This week on the mountain bike frame build series, we're rough cutting, bending, and mitering the seat stays. These processes are similar to what we did with the chainstays and other tubes, but there are some key differences with the seat stays.
Specifically, I use my Miter Buddy tool to help with holding the seat stays while mitering the dropout end. And then I bring out my old DIY seat stay mitering fixture—and make a modification to it—to help with the miter that fits the seat stays up to the seat tube.
You'll also see another good demonstration of my Cobra tube bender at work. We're doing a single-bend rear-end in this case, but note that my bender can also do s-bend seat stays, as I've shown in a separate video on this channel.
MUSIC: Urple Actus - Star Eyes (soundcloud.com/urpleactus) Muciojad - Aerial Ace (soundcloud.com/muciojad) Urple Actus - Landing (soundcloud.com/urpleactus) Muciojad - Pennsylvania Forecast (soundcloud.com/muciojad)Yeehaw! TIG Welding Chainstays on a Steel Bike FrameCobra Framebuilding2019-07-17 | The mountain bike build series continues! Today we're TIG welding the chinstays onto the bike frame. Of course, we're using a chainstay yoke for this bike, which we welded together in an earlier video. So that needs to get thrown in there, too.
Along with beautiful action shots of all that TIG welding, I discuss a few other things that come up: checking rear-end alignment, using a Park Tool bike stand while welding out the frame, what it's like welding different diameters of bike tubing versus the straight part of the chainstay yoke, and how forward-geometry mountain bike design is pushing the limits of common bicycle framebuilding tools.
Next, we'll be bending and mitering the seat stays, so we can finish welding out the rear end of the bike!
Of course, I use my Cobra tube bender to bend the chainstays. If you're interested in a tube bender that was designed specifically for bicycle framebuilding in a small shop, check it out at cobraframes.net/store/tube-bender.
For the chainstay mitering, I had to come up with my own solution since I don't have a chainstay mitering fixture. (And maybe it would have been complicated even with a chainstay mitering fixture, due to the chainstay yoke.)
MUSIC: Urple Actus - Landing (soundcloud.com/urpleactus) Urple Actus - Sunshine (soundcloud.com/urpleactus) Urple Actus - Please Hold (soundcloud.com/urpleactus) Muciojad - Pennsylvania Forecast (soundcloud.com/muciojad) Joakim Karud - Rock Angel (soundcloud.com/joakimkarud)TIG Welding a Steel Mountain Bike Frame (Front Triangle)Cobra Framebuilding2019-07-03 | Today we're TIG welding the front triangle of my hardtail mountain bike! In the last video, we tack welded the front triangle together in the frame jig, and today we're doing the finish welding. I talk you through a bunch of my thought process along the way.
First, I show the setup I have for checking the alignment of the bike frame during the TIG welding process. (I come back to check the alignment just a couple times during welding.) I also mention what I think a more ideal setup for alignment would look like, using an example from Engin Cycles.
Then we get into welding out the front triangle of the bike frame. It goes pretty well. The main problem I run into is where the downtube meets the seat tube at the bottom bracket. I had a small hole burn through the down tube right where it came to a point. I explained my thought process for how to go about fixing it.
Next, we'll be getting into building out the rear end of the bike frame!
Before I can actually do any of the welding, though, I had to spend a while with the belt sander and with some acetone, cleaning off the mill scale and then cleaning the tubes for welding. So I showed that process, too.
I generally use the frame jig to help me tack weld the frame together, and then I actually do the finish welding out of the frame jig.
I tried to explain my thought process as I was showing the tack welding for the front triangle: Where I'm placing the welds, why I'm using filler instead of just fusion welding, and other considerations.
In the next video, we fully weld out the front triangle of the bike frame!
This week, we complete the somewhat tricky tube notching for where the down tube, seat tube, and bottom bracket all come together. I do it with hand file mitering, and it takes a little while, sneaking up on the exact fit. Then we drill water bottle boss holes and move onto the top tube.
The top tube mitering is pretty simple compared to what needed to be done for the down tube and seat tube on this bike. By the end of the video, we have successfully mitered and fit up all the main tubes of the frame, completing the front triangle. Next, we'll be cleaning and preparing all these tubes for welding, then tack welding it together in my framebuilding jig (frame welding fixture).
Listen at my website right now: http://cobraframes.net/podcast (Links coming soon for Spotify, Apple Podcasts, and Google Podcasts!)
I've been dropping references to the Shut Up and Build Bikes Podcast for months, but episode 1 is finally up to listen to. In the first episode, I interview Kris Henry from 44 Bikes. I included a short preview at the end of this video, but you'll want to go listen to the full episode at the link above.
On the Shut Up and Build Bikes Podcast, I will interview established bicycle framebuilders and others in the broader bicycle framebuilding world and share the conversations with you. My goal is to produce a valuable resource for new and established framebuilders, as well as those who are just curious about the process.
Listen in, and let me know what you think! New episodes every Monday!
MUSIC: "Oceanwip3" by urpleactusMitering the Downtube for My Hardtail MTB Frame!Cobra Framebuilding2019-06-07 | The hardtail mountain bike frame build continues. Today: Downtube mitering!
First, I cover a bit about tube rolling and dealing with bicycle-specific tubing (butted tubes, specifically). I discuss how I rough cut my tubing to length and how I use BikeCAD to determine the length and angles I need for mitering. Then I make the miters at both ends of the downtube (using hole saws in a Bridgeport vertical mill), and I demonstrate how to fine-tune the fit-up between the downtube and head tube with a hand file.
MUSIC: "Star Eyes" by urpleactus (soundcloud.com/urpleactus)The MTB Frame Build Continues! Jig Setup and Seat Tube MiteringCobra Framebuilding2019-05-30 | Our MTB frame build is getting exciting! Today we set up the framebuilding jig and load in the head tube, seat tube, and bottom bracket. We miter the seat tube for its connection to the bottom bracket, and we also do some drilling on the head tube and seat tube. Lots of Bridgeport action today, with a good dose of BikeCAD and some measurement and workholding challenges, as well!
MUSIC: Polaroid - ExtenzMaking a Seat Tube for a Hardtail MTB | Machining, Welding, BendingCobra Framebuilding2019-05-24 | The hardtail MTB frame build continues! This may be the most exciting step we've done yet: machining, welding, and bending the seat tube. Specifically, I will be (1) customizing a Paragon Machine Works seat collar by machining it on my lathe, (2) TIG welding it onto the seat tube, and (3) bending the seat tube with my Cobra tube bender that I developed specifically for bending bicycle tubing. I also show how I derived the numbers needed using my bike design in BikeCAD.
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Brazing vs TIG Welding for Bicycle FramesCobra Framebuilding2019-05-17 | When you're getting started with bicycle framebuilding, you have different options for how you want to join the tubes of the bike frame together. The main two options you have for steel bicycles are TIG welding and oxy-acetylene brazing. Which one should you start with? What are the pros and cons of TIG welding vs brazing for bicycle framebuilding? That's what I cover today!
Spoiler: I personally like to use both TIG welding (for the main joints of the bike) AND brazing (for braze-ons and other details). But the right choice for you depends on what style of bicycles you want to build, along with your budget, the total volume of bikes you want to produce, and more that I cover in the video!
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Bicycle Head Badges: What to Know as a FramebuilderCobra Framebuilding2019-05-09 | Head tube badges are something I overlooked for way too long as a bicycle framebuilder. They're not just informational marks like a serial number or a return address—they really allow you to add artistry, fun, and distinction to your custom bike frames.
Today I'm going over many different kinds of head tube badges and some of my favorite examples. I discuss how I got the etching done on my own head badges and bent them to fit the head tube. Along the way, I'll talk about related issues of branding and logo placement on the bicycle, as well as the very practical issue of how to attach the head badge onto the head tube.
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Machining a Bicycle Head Tube on a Manual Lathe | MTB Frame BuildCobra Framebuilding2019-05-03 | Today we continue the hardtail MTB frame build! As I explained previously, I decided to buy a 44 mm head tube from Paragon Machine Works for this frame build. But since it's a pretty common head tube among custom framebuilders, I wanted to spend a little time customizing it. That's what I'm doing in this video.
First, I give a brief overview of my manual lathe, and I show one way to hold a head tube in a lathe that provides access to its full length. Then I rough out the radii at each end of the head tube for a more distinct shape, and I turn the length of it down just a bit.
I finish by polishing off the head tube in a pretty dangerous way with a hand file and Scotch Brite, which I don't actually recommend. Be very cautious with your safety when working with a lathe, especially if you're trying anything like this.
Hopefully, watching this gives you some ideas for how you might machine your own custom head tubes on a manual lathe!
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Measuring Real-World Bicycle Geometry | BikeCAD TutorialCobra Framebuilding2019-04-25 | When learning bicycle design, you need to become familiar with how the numbers you're seeing in BikeCAD actually affect the ride on the bike. One way you get this experience is by just building many bikes, and seeing how each change to the geometry affects the ride feel. But another thing you can do is to use bikes you're familiar with and bikes that you have in real life as points of reference. You can measure them, model them up in BikeCAD, and become familiar with what those numbers FEEL like.
In this video, I'm attempting to do this myself, for the first time. Honestly I didn't do a perfect job. But I think I was able to share a good deal of tips for measuring bike geometry, and I think this general idea is solid, and something I would recommend to other bicycle framebuilders. Let me know what you think!
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Bicycle Photography 101: How to Take a Picture of Your BikeCobra Framebuilding2019-04-18 | Bicycle photography is important, but that doesn't mean it has to be complicated or expensive. Today I'm covering just a few simple tips that can drastically improve the quality of photos you're able to take of your bikes without too much effort and time.
You don't need studio lights or the best camera on the market. By using ambient natural light, propping the bike up with a stick, and just a few other tips, we can get pretty good results pretty easily.
Two sources that taught me a lot of what I know on this subject: - For bicycle photography specifically: John Watson (theradavist.com/). - For photography more generally: Jared Polin (youtube.com/user/JaredPolin).
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Buying Tubing and Materials for a Hardtail MTB Frame BuildCobra Framebuilding2019-04-11 | Buying bicycle tubing and raw materials is not my favorite step of building a bicycle frame, but it's gotta get done, and there are some helpful tips I can share on the subject. Today I show the websites where I buy straight-gauge 4130 chromoly steel tubing for bike frames, as well as more specialized materials for bicycle frames, including machined headtubes, bottom bracket shells, cable guides, dropouts, and seat collars.
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Which Machine Tools to Buy First for Bicycle FramebuildingCobra Framebuilding2019-04-03 | When you're building out your bicycle framebuilding shop, you might become interested in all kinds of machine tool setups: vertical milling machine, horizontal milling machine, drill press, lathe. But which should you buy first to get the most bang for your buck (and the most bang for your square footage)?
My recommendation is to get a vertical milling machine like the Bridgeport mill first. It's such a versatile machine tool—you can do just about everything on it, as I explain in the video. Next, if you've got more cash and space, I'd recommend a manual lathe for round parts, a few specific framebuilding processes, and general usefulness in the shop.
I would only recommend horizontal milling machines if you're getting into serious production and want to speed up your framebuilding process by having multiple mills with dedicated mitering setups on each.
And I'd only really recommend a CNC mill for bicycle framebuilding if you're someone who wants to create your own custom frame components that nobody else has (braze-ons, dropouts, etc). It's not going to save you money over just buying the same things stock from Paragon Machine Works.
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Why Lathes Are So Useful for Bicycle FramebuildingCobra Framebuilding2019-03-27 | A good manual lathe can be such an awesome addition to a bicycle framebuilding shop. In this video, I talk about the usefulness of lathes in general, what they do (manual lathe basics), and the specific applications to bicycle framebuilding.
I demonstrate facing, turning, chamfering, drilling, boring, and parting, and I talk about how to do threading on a lathe, as well. I talk about how lathes can be used for post-welding machining on the headtube and bottom bracket, how they're used for mountain-bike seat collars, and how they can be used for crown-race-seat machining on forks. I talk about how bicycle framebuilders like Firefly Bicycles and Number 22 Bicycles use CNC lathes to butt titanium tubes. I mention various other uses for a lathe in bicycle framebuilding, as well as other tasks I've been able to use my lathe for, from my framebuilding fixture to the PVC pipes I use for welding rod storage.
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Shop Tour: Cobra Framebuilding Tooling | March 2019Cobra Framebuilding2019-03-19 | Finally! A long overdue shop tour! Today I give an overview of how I've laid things out in my shop and how it got to where it is today. Day to day, I use my shop mostly to make bicycle framebuilding tools with my CNC mill, which I sell as Cobra Framebuilding Tooling. But I also have a lot of things in my shop for bicycle framebuilding itself.
I forgot to mention: My shop is about 400 square feet, and it's part of a larger building with 3-phase power and compressed air.
I'm blessed to have two Bridgeport milling machines, one manual and one CNC. I've got a Clausing lathe, an Everlast TIG welder, an oxy-acetylene torch, a DeWalt metal chopsaw, a nice heavy wooden workbench, a 1" belt sander, a couple Kurt vises and an Orange vise, a pedestal grinder, and a few good tables and cabinets.
I refer to many other videos throughout this shop tour because I've already covered many of the workspaces, machines, and setups in-depth in other videos. Here's a list of those other videos:
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.How to Miter Bicycle Tubes with a Hand File | Framebuilding TipsCobra Framebuilding2019-03-14 | If you don't have a milling machine and you want to miter bicycle tubing to build a bike frame, you should consider mitering with a hand file. It's a simple, old-school approach that I learned in my framebuilding class with Doug Fattic back in 2010. We built lugged, brazed steel bicycle frames, and the equipment it required was very minimal, centered around a workbench, hacksaws, and hand files.
In this video, I demonstrate how to miter bicycle tubing in a simple workbench with a hand file and fit it up to another tube. I also cover how to miter at a specific angle with a bevel protractor, as well as how to hold the tubes in your vise without crushing them or having them slide around on you.
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Making S-Bend Seat Stays with the Cobra Bicycle Tubing BenderCobra Framebuilding2019-03-11 | S-bend seat stays are pretty popular in the bicycle framebuilding world. Bending your own S-bends, though, comes with some unique challenges. In this video, I show how you can use my Cobra bicycle tubing bender, along with BikeCAD and some common measurement tools, to bend a matched pair of S-bend seat stays to the precise specifications you need for your frame.
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Which Dimensions Matter in Bike Design? | Hardtail MTB Frame BuildCobra Framebuilding2019-03-05 | I've made some adjustments to my hardtail MTB frame design after getting more feedback and really digging into forward-geometry mountain bike design. See my first design video for this frame build here: youtube.com/watch?v=doHxk8csXIc.
Along with showing the revisions I've made in BikeCAD and some modeling in Fusion 360, I discuss the importance of always recognizing which measurements on the bike frame really matter. What are those most salient, driving dimensions in a hardtail mountain bike frame, and how do those dimensions affect the riding experience?
Big thanks again to Peter Verdone, Matt from Quiver Design Works, Nicholas Jensen, and everyone else helping me work through my first hardtail mountain bike design.
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.Designing a Hardtail Mountain Bike in BikeCAD | MTB Build SeriesCobra Framebuilding2019-03-01 | This is my first hardtail mountain bike design. Today I open up BikeCAD and discuss a bunch of the main considerations going into the bike design. I also show how these parameters are tweaked in BikeCAD. I still need to fine tune the rear-end length, confirm my fork specifications and some other details, and maybe get a little more feedback from folks I trust. So I'll still have at least one more video coming soon about the MTB design before we get into fabrication.
Big thanks to Adam Sklar (Sklar Bikes) and Peter Verdone (PVD) for helping me with details of this bike design. Peter Verdone's website is a huge resource for bicycle design, so be sure to check that out: http://www.peterverdone.com. Adam makes great mountain bikes (sklarbikes.com) which are informed by a lot of riding experience, so I was really grateful for his feedback on my design, as well.