Tuned In Podcast
Building a BIG POWER LS That Actually Lasts #PODCAST
updated
Snippet from the Tuned In podcast episode 148: The “Impossible” Backyard V10 Screamer
Listen to the full episode here: youtu.be/eAz4iTgb5uY
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#BIY #buildityourself #fordv10 #v10 #exhaust #cad #highperformanceacademy #cars
Snippet from the Tuned In podcast episode 148: The “Impossible” Backyard V10 Screamer
Listen to the full episode here: youtu.be/eAz4iTgb5uY
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#BIY #buildityourself #fordv10 #v10 #customcamshaft 3dprinting #cad #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #cars #motorsport #racing
Snippet from the ‘Tuned In’ podcast episode 108: Twin-Charging — Good Idea or Unnecessary Complication?
Listen to the full episode here: https: youtu.be/hl3lDi7N_a8
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Follow Norris Designs here:
IG: @norris_designs
FB: Norris Designs
YT: Norrisdesigns
WWW: www.norrisdesigns.com
#norrisdesigns #evo #4g63 #evoix #twincharging #highperformanceacademy #buildtunedrive #learndriveoptimise #motorsport #learntotune #enginebuilding101 #racecraft #auto #carmods #automotive #motorsports #racing #dragracing #endurance #circuitracing #roadracing #boost
Snippet from the Tuned In podcast episode 146: From Home Builds to Hypercars: Composites for Everyone
Listen to the full episode here: youtu.be/Nmnmn6V90mk
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#commonfibers #ssctuatara #resininfusion #molddesign #prepreg #wetlayup #designformanufacture #composites #carbonfiber #aerodynamics #fiberglass #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing
Want a high-revving, F1-sounding, naturally aspirated V10 on a budget? Sounds impossible—until Jack and Diego from Build It Yourself made it happen. They took a humble Ford V10 truck engine, crafted custom four-valve heads, and engineered headers that deliver that unmistakable F1 scream.
In this episode of Tuned In, Jack and Diego share their backgrounds in automotive engineering and their journey into the performance automotive world. They discuss their current roles at Ford, the skills they bring to their YouTube channel Build It Yourself, and the innovative technologies they leverage, such as CAD, 3D scanning, and 3D printing.
The conversation dives deep into the highs and lows of building a one-off V10 engine. From the headaches of welding cylinder heads and perfecting cooling and oil flow to the science of exhaust sound engineering. They unpack machining, camshaft design, and the creative process behind documenting the entire build on YouTube.
Then there’s the bold decision to drop this beast into a 2017 Lincoln Continental, a choice that might not seem obvious to many enthusiasts. With the added challenge of a rear-wheel-drive conversion, it was definitely no straightforward swap.
What they’ve pulled off in their home workshop is nothing short of extraordinary. Blending solid engineering know-how with hands-on ingenuity, their Build It Yourself attitude is truly inspiring.
Follow Jack & Diego here:
Youtube: youtube.com/@biy_buildityourself
Instagram: instagram.com/biy_buildityourself
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Timestamps:
0:00 The “Impossible” Backyard V10 Screamer
4:22 How did you get into cars? (Jack)
6:34 How did you get into cars? (Diego)
12:43 Opinion on the future of EV’s side quest
14:32 What would you say your key skills are?
18:38 How hard is it to learn 3d scanning?
26:36 How did you learn the CAD skills?
29:53 Why do we all need 3d printers?
39:40 How did the BIY channel start and why the V10?
42:15 What is an even fire engine?
48:25 How did you convert the engine to 4 valve double overhead cam?
56:15 What issues did welding two heads together cause?
59:44 No one wanted to line bore your cam journals?
1:02:15 How did you find someone to make you custom cams?
1:04:30 Did you consider using any other V10’s?
1:08:07 What's the power and rpm to date?
1:09:40 What chassis did you decide to put it in?
1:13:42 How hard is the rear wheel drive and engine swap?
1:16:29 How does header design affect sound?
1:27:51 3D printed 5 to 1 exhaust collector
1:30:15 Why did you decide to make a YouTube channel for the build?
1:39:21 Why didn’t you try to tune the car yourselves?
1:43:44 Final 3 Questions
#BIY #buildityourself #fordv10 #v10 #customcamshaft #3dprinting #cad #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost
Whether it’s a bespoke quad-turbo V12 or a modified OE production engine, the fundamentals remain the same—we’re all looking for those extra gains. Italtecnica’s Riccardo Breda is here to break down the core concepts that could help you take your engine build to the next level.
Snippet from the Tuned In podcast episode 147: Inside the Art of Bespoke Engine Building
Listen to the full episode here: youtu.be/DdVgNltR_HY
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package.
#italtecnicaengineering #bespokeengine #4cylinder #kimeraevo37 #turbocharged #enginedesign #highperformanceacademy #enginebuilding101
It’s common for car enthusiasts to rush their car onto the dyno before it’s truly ready, only to have it strapped down and the tuner uncover a list of issues. Nothing kills the excitement of chasing those long-awaited power figures faster than unexpected problems.
Booking a session with remote tuning expert Shawn Christenson could save you thousands. Shawn, from @tunedbyshawn, is a Haltech specialist who can remotely tune your car from anywhere in the world.
Snippet from the Tuned In Podcast episode 145: How to Avoid Wasting Thousands on the Dyno
Listen to the full episode here:youtu.be/dQbbSsrN_Go
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#tunedbyshawn #remotetuning #tuning #efituning #haltech #adaptronic #canbus #enginediagnostics #knockcontrol #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing
Snippet from the Tuned In podcast episode 147: Inside the Art of Bespoke Engine Building
Andre and Riccardo discuss rod to stroke ratio and much more. Listen to the full episode here: youtu.be/DdVgNltR_HY
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#italtecnica #italtecnicaengineering #bespokeengine #italianengineering #v12 #turbocharged #restomod #enginedesign #naturallyaspirated #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost
Booking a session with remote tuning expert Shawn Christenson could save you thousands. Shawn, from @tunedbyshawn3456, is a Haltech specialist who can remotely tune your car from anywhere in the world.
Snippet from the Tuned In Podcast episode 145: How to Avoid Wasting Thousands on the Dyno
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#tunedbyshawn #remotetuning #tuning #efituning #haltech #adaptronic #canbus #enginediagnostics #knockcontrol #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing
Snippet from the 'Tuned In' podcast episode 113: A “Mil-Spec” Wiring Harness is Total Overkill for Most People.
Listen to the full episode here:hpcdmy.co/HardwiredYT
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package
#wiringgangster #hardwiredperformance #highperformanceacademy #buildtunedrive #learndriveoptimise #dontletthesmokeout #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost #ultra4 #trophytruck #motorsportwiring #wiring
Whether it’s a bespoke quad-turbo V12 or a modified OE production engine, the fundamentals remain the same—we’re all looking for those extra gains. Italtecnica’s Riccardo Breda is here to break down the core concepts that could help you take your engine build to the next level.
In this episode of Tuned In, Riccardo discusses his journey into automotive engineering and his role as an engine designer at Italtecnica, a company specialising in resto-mods, engine development, design, and manufacturing, working with brands like Ferrari and Maserati.
The conversation explores the evolution of Italtecnica, the challenges and innovations in resto-mod projects, and the range of engines currently being produced and developed. That includes a new naturally aspirated V12 for racing, along with a homologated version for road use. He also talks about the challenges of balancing power output with emissions compliance in modern engine design.
We dive into key fundamentals of engine design, including compression ratio, bearing clearance, rod-to-stroke ratio, cylinder head design, and different methods of valve actuation. The conversation also touches on the Atkinson cycle and how it can be replicated with variable valve timing.
It’s not every day you get to tap into the mind of someone designing bespoke high-performance engines from the ground up. This episode is jam-packed with insight and a must-listen for anyone interested in engine building.
Follow Riccardo here:
Instagram: instagram.com/italtecnica.engineering/?hl=en
Facebook: facebook.com/italtecnica.engineering
WWW: italtecnicaengineering.com/index.php/en/home-eng
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Timestamps:
0:00 Inside the Art of Bespoke Engine Building
4:35 How did you become interested in cars?
8:46 Once you Graduated what did your work career look like?
9:50 What’s the history of Italtecnica?
14:05 What is the Kimera EVO37?
17:43 What is different about modern cylinder head design?
20:19 What engines are you working on and offering in 2025?
21:52 The V12 NA engine you’re producing, who is the target market?
25:29 What sort of HP and RPM will the V12 produce?
28:12 It’s not all about HP figures and 0-60 times
30:10 How do you decide on a rpm limit for a bespoke v12 engine?
37:34 Atkinson cycle, How do we mimic with VVT?
41:44 How do you decide on a compression ratio when designing an engine?
45:03 Can you simulate knock threshold in a virtual model?
47:37 How much do you consider rod to stroke ratio?
53:36 What’s your take on bearing/oil clearances?
1:02:18 What drives your bank angle decision?
1:08:21 What type of valve actuation are you using?
1:14:40 What’s your lifespan between rebuilds on your engines?
1:15:46 What material do you use for your pistons?
1:18:25 How close are real world numbers to your simulations?
1:22:46 What are the cost challenges with cast parts and low production numbers?
1:27:14 Final 3 questions
#italtecnica #italtecnicaengineering #bespokeengine #italianengineering #v12 #turbocharged #restomod #enginedesign #naturallyaspirated #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost
Tuned In Podcast 124: "It's Drag Racing With Corners” — Building the Fastest Car on the Hill.
Listen to the full episode here: youtu.be/-XEYAzRJZdA
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#Britishhillclimb #engineering #McLaren #astonmartin #Cosworth #IndyCar #V8 #hillclimb #P4t #highperformanceacademy #buildtunedrive #learndriveoptimise #datanerd #racecraft #cars #motorsport #racing
Snippet from the Tuned In podcast episode 144: Is a Retired F1 Car the Ultimate Track Toy?
Listen to the full episode here: youtu.be/FqBdDKNeOW8
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#tdf #tdflimited #tdfone #tdfworks #tdfprecision #formula1 #f1 #retiredf1cars #f1engineering #powertrain #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing
Joel Vermiglio never set out to work in Formula 1 — in fact, he didn’t have any plans to get into motorsport at all. That changed in his late teens when he got into cars, went on to study, and eventually found his way into the industry.
Snippet from Tuned In podcast episode 135: The TRUTH About Life in Formula 1
listen to the full episode here: hpcdmy.co/JoelYT
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Follow Joel here :
IG: @garage68motorsport
YT: Garage 68 Motorsport
WWW: http://mclaren.com/racing
#mclaren #mclarenf1 #formula1 #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost #vwcaddy #twinturbov8
When @garage68motorsport isn’t working his day job at McLaren Formula 1, he’s in his workshop building an old VW Caddy… with a McLaren twin-turbo V8 in the rear tray, a Lamborghini gearbox, and Porsche 911 suspension.
Joel Vermiglio never set out to work in Formula 1 — in fact, he didn’t have any plans to get into motorsport at all. That changed in his late teens when he got into cars, went on to study, and eventually found his way into the industry.
Snippet from Tuned In podcast episode 135: The TRUTH About Life in Formula 1
listen to the full episode here: hpcdmy.co/JoelYT
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Follow Joel here :
IG: @garage68motorsport
YT: Garage 68 Motorsport
WWW: http://mclaren.com/racing
#mclaren #mclarenf1 #formula1 #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost #vwcaddy #twinturbov8
This week Matt Smith of @JustAutosMechanical joins us to discuss all things diesel tuning — operating principles, combustion temperature, reflash options, and a whole lot more.
Snippet from the Tuned In podcast episode 133: The Dos and Don’ts of Diesel Tuning
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
TAGS:
#highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost #Justautos #Hilux #toyota
Joe Scarbo of @scarboperformance8623 and Scarbo Vintage began his love affair with all things motorised like many of us — young and elbow-deep in a deconstructed radio control car trying to fix and improve it. This episode first covers Joe’s early days as he gained an appreciation for all things automotive through his love of both RC cars and go-karting. After a few too many crashes in the kart, Joe steered his passions towards the engineering side of the game, and began building his first car completely from scratch.
Snippet from the Tuned In podcast episode 125: Designing and Fabricating Your Own “Hyper Truck”
Listen to the full episode here: youtu.be/8_3oE-lo1rQ
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#sv1rover #sv1 #offroad #baja #scarboperformance #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #datanerd #racecraft #cars #motorsport #racing #boost #motorsportfabrication #fabrication
This week Matt Smith of @JustAutosMechanical joins us to discuss all things diesel tuning — operating principles, combustion temperature, reflash options, and a whole lot more.
Snippet from the Tuned In podcast episode 133: The Dos and Don’ts of Diesel Tuning
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Follow Matt here:
IG: @justautosmechanical
FB: Just Autos
YT: Just Autos Mechanical
TKTK: justautos
WWW: justdieselperfomance.com.au
TAGS:
#highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost #Justautos #Hilux #toyota
Composites might seem like the secret language of aerospace engineers and hypercar builders, but Gabriel Mountjoy from Common Fibers is here to break down those barriers. He’s out to prove that composites aren’t just exotic materials—you can use them to elevate your own builds too.
In this episode of Tuned In, Gabe shares his journey from a mechanical engineering student passionate about automotive efficiency to a successful entrepreneur in the composites industry. Alongside his now-wife Ann, he co-invented the first carbon fiber hinge, and today their company is not only one of America’s leading composite manufacturers but also uniquely committed to educating people on how to work with these materials.
We explore the evolution of composites in automotive applications, the challenges and opportunities they bring, and why designing for manufacturability is key. Gabe also takes us inside high-profile projects like SSC North America’s Tuatara—a hypercar capable of 300 mph—explaining how they construct mission-critical, complex components such as its carbon-fiber monocoque.
Gabe breaks down the essentials of material and resin selection, unpacks layup methods, and clarifies the differences between wet layup, vacuum bagging, and resin infusion. He highlights the advantages of prepreg materials and compares autoclave with out-of-autoclave approaches.
Despite producing some of the most intricate composite parts in the U.S., Gabe and his team remain refreshingly open about their processes and deeply passionate about making composites more accessible.
Follow Gabe here:
Instagram: instagram.com/commonfibers
Facebook: facebook.com/CommonFibers
YouTube: youtube.com/@UCqeyUAS5RfYWeifswnWg8MA
WWW: commonfibers.com
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Timestamps:
0:00 From Home Builds to Hypercars: Composites for Everyone
4:37 Did the passion for cars come first or carbon fiber?
7:54 How do you become a composites engineer?
10:01 What’s your work history prior to starting Common Fibers?
11:18 Are composites much more common in other industries?
14:55 What does Common Fiber’s look like today?
16:11 How are you finding composite technicians?
18:06 Why did you open a second facility?
19:01 Can you briefly explain the different resin types?
21:30 What has been the process of growing a business to have 40 staff?
26:33 How much work are you doing for the aerospace industry?
29:22 What is the SSC North America Tuatara?
30:38 How did you get involved in the hyper car project?
32:30 How does the design and production work with the Tutara parts?
38:01 What’s the benefits of the monocoque over a conventional chassis?
44:11 When we talk about composites, what are the different materials?
47:23 What are the different types of carbon fibre?
49:18 What is carbon's best strength quality?
51:56 How do you validate the strength of your parts?
57:28 What is the process of designing and manufacturing a mold?
1:06:13 How do we layup the carbon or fiber glass into our mold?
1:14:47 What is a wet layup and where would we use it?
1:18:25 What is vacuum bagging?
1:23:02 What is resin infusion?
1:28:43 What is prepreg?
1:38:25 Final 3 questions
#commonfibers #ssctuatara #resininfusion #molddesign #prepreg #wetlayup #designformanufacture #composites #carbonfiber #aerodynamics #fiberglass #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost
Snippet from the Tuned In podcast episode 112: Building a BIG-POWER LS That Actually Lasts.
Listen to the full episode here: youtu.be/T_fPCofOyLQ
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#chevls #chevy #lsx #highperformanceacademy #buildtunedrive #learndriveoptimise #motorsport #learntotune #enginebuilding101 #wiring101 #datanerd #gofasterwithdata #racecraft #auto #carmods #automotive #motorsports #racing #dragracing #endurance #circuitracing #roadracing #boost #rootsblower #drifting #s13
It’s common for car enthusiasts to rush their car onto the dyno before it’s truly ready, only to have it strapped down and the tuner uncover a list of issues. Nothing kills the excitement of chasing those long-awaited power figures faster than unexpected problems.
Booking a session with remote tuning expert Shawn Christenson could save you thousands. Shawn, from Tuned by Shawn, is a Haltech specialist who can remotely tune your car from anywhere in the world.
Shawn shares his journey from a childhood fascination with cars to becoming a self-taught tuner and business owner. He talks about the challenges of diving headfirst into tuning, including his first attempts learning on his FD RX-7. “Piston engines were easy after learning to tune on a Rotary”
We explore how Shawn began his tuning career with Adaptronic before transitioning to Haltech, which he now specialises in and also provides technical support. He outlines his remote tuning process and why it works so effectively, stressing the importance of road-tuning a car before it ever sees the dyno.
Shawn breaks down the pros and cons of remote tuning, including how he manages tricky areas like knock control when the car isn’t physically in front of him. He also touches on CAN bus integration in modern vehicles, an area he’s becoming increasingly involved with.
Spending hours—or even days—on the dyno can quickly add up if things don’t go to plan. Shawn’s focus on minimising hiccups and maximising efficiency makes a strong case for his approach. He might just be the one to help get the most out of your car.
Follow Shawn here:
Instagram: instagram.com/tunedbyshawn
Facebook: facebook.com/tunedbyshawn
WWW: tunedbyshawn.com
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Timestamps:
0:00 How to Avoid Wasting Thousands on the Dyno
3:44 How did you form a passion for cars?
8:12 I brought a FD RX7 for $9000
12:00 Did you learn to tune on your FD RX7?
24:54 What were you doing for Elliot (Turblown) at this point?
29:06 The process of remote support and tuning
32:03 How Tuned by Shawn started
36:48 How and why you specialised in Adaptronic then Haltech
43:04 Tech support from ECU brands is massive
49:34 Firmware updates
52:50 Getting the car dialed in before the dyno
56:24 What are long term fuel trims and how do they work?
1:00:00 Is being away from the car a pro or a con? Remote tuning
1:03:21 What’s some red flags you look for in the long term fuel trim table?
1:08:33 Are you remote tuning on a dyno or on the road?
1:12:48 How do you tune to avoid knock remotely?
1:23:04 Are you providing a more conservative tune remotely?
1:26:11 How are you using CAN Bus on the Haltech?
1:47:06 Final 3 questions
#tunedbyshawn #remotetuning #tuning #efituning #haltech #adaptronic #canbus #enginediagnostics #knockcontrol #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing
Snippet from the Tuned In podcast episode 144: Is a Retired F1 Car the Ultimate Track Toy?
Listen to the full episode here: youtu.be/FqBdDKNeOW8
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#tdf #tdflimited #tdfone #tdfworks #tdfprecision #formula1 #f1 #retiredf1cars #f1engineering #powertrain #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing
Snippet from the Tuned In podcast episode 112: Building a BIG-POWER LS That Actually Lasts.
Listen to the full episode here: youtu.be/T_fPCofOyLQ
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#chevls #chevy #lsx #highperformanceacademy #buildtunedrive #learndriveoptimise #motorsport #learntotune #enginebuilding101 #wiring101 #datanerd #gofasterwithdata #racecraft #auto #carmods #automotive #motorsports #racing #dragracing #endurance #circuitracing #roadracing #boost #rootsblower #drifting #s13
Snippet from the Tuned In podcast episode 112: Building a BIG-POWER LS That Actually Lasts.
Listen to the full episode here: youtu.be/T_fPCofOyLQ
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#chevls #chevy #lsx #highperformanceacademy #buildtunedrive #learndriveoptimise #motorsport #learntotune #enginebuilding101 #wiring101 #datanerd #gofasterwithdata #racecraft #auto #carmods #automotive #motorsports #racing #dragracing #endurance #circuitracing #roadracing #boost #rootsblower #drifting #s13
Snippet from the Tuned In podcast episode 144: Is a Retired F1 Car the Ultimate Track Toy?
Listen to the full episode here: youtu.be/FqBdDKNeOW8
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#tdf #tdflimited #tdfone #tdfworks #tdfprecision #formula1 #f1 #retiredf1cars #f1engineering #powertrain #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing
Formula 1 represents the pinnacle of motorsport and James Densley along with the team at TDF Limited are breathing new life into retired F1 cars, transforming them back into the ultimate track weapons.
James shares his journey from a car-obsessed child through karting to mechanic at the top levels of motorsport. He recounts his experiences in Formula 3 and then with Mercedes F1, before explaining how TDF Limited was founded and started specialising in restoring and supporting retired F1 cars.
The conversation explores the complexities involved in purchasing, restoring, and maintaining historic F1 cars, including the challenges posed by obsolete electronics and sourcing rare components. James emphasises the critical role of modern technologies such as 3D scanning in facilitating these restoration projects.
We also discuss the operational and logistical challenges of running historic F1 cars today, the development of the TDF One program to make these cars more accessible, and the technical hurdles of modernising powertrains while preserving the true essence of Formula 1 racing.
It’s unfortunate that these extraordinary machines often face the scrap heap or sit around as expensive ornaments after their brief racing lives. What TDF Limited are achieving by resurrecting these masterpieces and returning them to the track is truly groundbreaking.
Follow James here:
Instagram: instagram.com/tdf_limited
Youtube: @tdf_limited
WWW: tdf.co.uk
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Timestamps:
0:00 Is a Retired F1 Car the Ultimate Track Toy?
4:22 How did you form an interest in cars?
6:34 What’s a race weekend look like in Formula 3?
7:59 How do limited slip diffs work?
9:19 Tell us about Mercedes F1
14:00 What is TDF and how did it come to be?
18:20 How does TDF Works get a hold of used F1 cars?
22:22 Used F1 engines, are they hard to find and get running?
27:45 How do we get a trans axel for one of these cars?
31:50 What is seamless gear shifting and how does it work?
34:41How do you go about running these cars on old electronics?
45:03 How do you source replacement body and aero parts?
49:50 Can you put something like a Judd V10 in one of these chassis?
52:37 What’s it look like for TDF Works to take a F1 car to the track for the day?
58:04 Can you give us an idea of the hydraulic system?
59:05 What is TDF One and how does it work?
1:02:55 How much of a debate was it to go to a turbo 4 cylinder?
1:06:29 How much HP are the genuine F1 cars making compared to TDF One?
1:07:59 What is the 4 cylinder engine in the TDF One cars?
1:11:03 Are you running a F2 trans axel in the rear?
1:12:52 What’s the electronics package and have you added ABS & Traction control?
1:15:46 How often do you need to overhaul the engine and gearbox and other parts?
1:20:50 How does crack testing on carbon fibre work?
1:22:15 How much does a TDF One car cost to run?
1:23:57 How many TDF One cars are out there?
1:24:44 What’s the build time on one of these cars?
1:28:26 Final 3 questions
#tdf #tdflimited #tdfone #tdfworks #tdfprecision #formula1 #f1 #retiredf1cars #f1engineering #powertrain #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing
Matt is a self-taught tuner that you might recognise from his YouTube channel, or his frequent appearances on mega channels like Cleetus McFarland. Matt has been tuning all types of gasoline and diesel vehicles since his teenage years, but his main speciality and passion is GM’s LS family of V8s. In this episode, Matt first tells us how he came up in the diesel tuning world before switching to gasoline engines.
Snippet from the ‘Tuned In’ podcast episode 117: Got an LS? Here’s How to Get the Most Out of Tuning It.
Listen to the full episode here: hpcdmy.co/MattsYT
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#LS #LSX #hptuners #gm #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #cars #motorsport #racing #boost #dyno #ecu #corvette #camaro #pontiacgto #pontiacg8 #ls1 #ls2 #ls3 #ls7 #lt
Matt is a self-taught tuner that you might recognise from his YouTube channel, or his frequent appearances on mega channels like Cleetus McFarland. Matt has been tuning all types of gasoline and diesel vehicles since his teenage years, but his main speciality and passion is GM’s LS family of V8s. In this episode, Matt first tells us how he came up in the diesel tuning world before switching to gasoline engines.
Snippet from the ‘Tuned In’ podcast episode 117: Got an LS? Here’s How to Get the Most Out of Tuning It.
Listen to the full episode here: hpcdmy.co/MattsYT
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#LS #LSX #hptuners #gm #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #cars #motorsport #racing #boost #dyno #ecu #corvette #camaro #pontiacgto #pontiacg8 #ls1 #ls2 #ls3 #ls7 #lt
We first spoke to Karel in 2022, and now he’s back to share what it really takes to shake down and test a home-built car of this caliber. Believe it or not, it all started with a toy car that Karel scanned and scaled up using CAD.
Snippet from the Tuned In podcast episode 143: DIY Motorsport Isn’t Easy But It’s Insanely Rewarding
Listen to the full episode here: hpcdmy.co/KarelYT
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#Karelsmotosport #bmw #bmwm4 #dtmm4 #turbocharged #composites #carbonfiber #aerodynamics #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost
Snippet from the 'Tuned In' podcast episode 140: You Don't Need a PhD to Add SERIOUS Performance.
On this week's episode of Tuned In, ex-Mercedes F1 aerodynamicist and brand new HPA tutor Kyle Forster @KYLEENGINEERS helps you find big gains in performance by adding aero.
Listen to the full episode here: hpcdmy.co/KyleYT
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#aero #aerodynamics #kyleengineers #downforce #laptime #timeattack #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost
We first spoke to Karel in 2022, and now he’s back to share what it really takes to shake down and test a home-built car of this caliber. Believe it or not, it all started with a toy car that Karel scanned and scaled up using CAD.
Snippet from the Tuned In podcast episode 143: DIY Motorsport Isn’t Easy But It’s Insanely Rewarding
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
#Karelsmotosport #bmw #bmwm4 #dtmm4 #turbocharged #composites #carbonfiber #aerodynamics #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost
No matter the stage of a build, most projects reach a point where giving up feels tempting. They demand grit and perseverance—and Karel Silha from KS Motorsport’s wild DTM-inspired M4 Time Attack build is no exception.
We first spoke to Karel in 2022, and now he’s back to share what it really takes to shake down and test a home-built car of this caliber. Believe it or not, it all started with a toy car that Karel scanned and scaled up using CAD.
In this episode, we explore the engineering details behind the build. Karel explains the challenges of mounting a massive aero package capable of generating serious downforce. He highlights the practical difficulties of high-performance engineering in a garage environment.
Karel also shares how he’s utilised modern tools like CAD and FEA to optimise the design. We talk through his experience testing on KW Suspension’s seven-post rig—fine-tuning the suspension for low-speed mechanical grip and managing the immense downforce at high speeds.
We discuss the complexities of engine management with turbocharging and individual throttle bodies (ITBs), the importance of on track testing versus dyno calibration.
Despite the technical challenges and the emotional toll, this episode is far from bleak. Karel’s journey is incredibly inspiring and he’s optimistic that 2025 will finally be the year this insane build shows its true potential.
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Follow Karel here:
Instagram: instagram.com/karel_s_motorsport
Facebook: facebook.com/karelsilhamotorsport
Youtube: youtube.com/@UCCZe0fAVMrTa9Vfu6YAqt7w
Links:
Episode 26 with Karel:
hpacademy.com/blog/turning-a-118-scale-model-into-a-1100hp-time-attack-weapon-podcast
Episode 75 with Dave Higgins (Aero Dave):
hpacademy.com/blog/075-the-realities-of-driving-and-maintaining-your-own-f1-car-podcast
Timestamps:
0:00 DIY Motorsport Isn’t Easy But It’s Insanely Rewarding
4:12 Welcome back, can you give us a quick intro into who you are?
6:06 Can you give us a quick overview of the car?
12:24 Designing car modifications with serviceability in mind
16:40 What engine setup do you have in the car?
22:51 How do you go about the first shakedown for a car like this?
26:37 How did you go about fixing the initial issues?
30:12 What was going on with the wheel speed issue and why do we even need wheel speeds?
34:51 Why are you not running ABS?
38:15 Wheel speed issues wrapped up.
42:29 Were there any other issues in the initial testing? Dry sump issues?
49:40 Issues with the fixing points for the splitter and wing?
53:27 What material are you using?
56:37 Can the average enthusiast get good results with FEA or do you need to be an Engineer to use it?
1:01:25 Did you have any cooling issues?
1:07:49 What is the height of the splitter at static ride height?
1:11:14 What is a 7 post rig?
1:19:44 Are you tuning the car onto bumpstomps to combat aero at high speeds?
1:21:46 Where does testing go from here?
127:11 How are you going about tuning your engine package?
1:35:11 Were you able to do any gear shift calibration on the dyno?
1:43:00 Will we see you at WTAK in Australia?
1:46:35 Final 3 questions
#Karelsmotosport #bmw #bmwm4 #dtmm4 #turbocharged #composites #carbonfiber #aerodynamics #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost
“Composites” aren’t just expensive and elaborate carbon fibre parts for high-end race teams. It may be easier, more accessible, and cheaper than you think to get started in the composite game.
This week on the podcast, we sit down with Keith Peden from Rodin Cars to unravel the world of composites.
Keith shares his journey from a childhood passion for cars to becoming a composite specialist in the automotive industry, building parts to the highest level. He emphasizes the importance of hands-on experience and how collaboration between engineering and manufacturing teams is key to success.
The conversation explores the properties of different composite materials and their applications in motorsport and automotive design. He discusses various aspects of composites, focusing on the differences between chopped strand mats and woven mats.
He also explains resin types, why proper mixing is critical to strength, and how many factors can impact the final product. We discuss different manufacturing methods, from wet layups to prepreg and autoclaves.
One of Keith’s big takeaways is that composites don’t always have to mean expensive carbon fibre. For many motorsport and automotive needs, affordable alternatives can deliver excellent results — especially for the home enthusiast.
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Website: rodin-cars.com
Instagram: instagram.com/rodincarsofficial
Facebook: facebook.com/rodincars
Youtube: @RodinCars
Timestamps:
0:00 “Composites” aren’t just for high-end motorsport
4:00 How did you form an interest in cars?
5:33 How do you become qualified in composite manufacturing and what’s your background?
16:18 Can you give us an overview of Rodin Cars?
27:44 What is your role as Composites Team Lead?
31:47 What does the word composites actually mean?
33:03 Is a carbon fibre part stronger in compression or tension?
35:21 What is carbon fibre and why is it so good for motorsport?
38:09 Carbon vs Kevlar vs Fibre glass cost variation?
40:42 What is a chopped strand mat?
43:05 What is a woven mat?
44:44 What is resin?
48:49 What does the term prepreg mean?
52:55 What is an Autoclave?
59:09 Other types of layup methods
1:11:55 Downsides of composites parts being repaired
1:13:21 How do you add threaded bosses for attachments to a composite part?
1:16:24 Final 3 questions
#rodincars #rodin #composites #carbonfiber #aerodynamics #fiberglass #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost
Forget the hype around “Mil-Spec” wiring — most builds don’t need it. Smart, fit-for-purpose materials and design can still deliver a reliable harness with great performance and aesthetics.
This week on the podcast we sit down with Technica Racewire co-founders Philip Chiu and Kevin Tan to uncover the wiring harness essentials.
Philip and Kevin share their journeys from a childhood passion for cars to becoming the owners of Technica Racewire. They discuss the transition from mechanical engineering to automotive wiring.
We cover their focus on classic Porsche builds and the production run harnesses they build, the ECU brands they trust, and how they approach configuration depending on the application.
They dive into the intricacies of working with Autosport connectors and what are some suitable alternatives at a lower price point but still perform to a race grade level. We also cover the differences between a club level harness and a high end motorsport harness.
Most importantly, they shine a light on the steps that can make or break a harness and the common mistakes beginners make when trying to DIY their first one.
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Follow Technica Racewire here:
Instagram: instagram.com/technicaracewire
Facebook: facebook.com/technicaracewire
WWW: technicaracewire.com
Links:
Autosport Manual: te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1-1773721-9_as_technical&DocType=DS&DocLang=EN
0:00 This Could Make or Break Your Wiring Harness
4:12 How did you get interested in the automotive scene? (Kevin)
6:52 How did you get interested in the automotive scene? (Philip)
9:51 How did you move towards building motorsport grade harnesses?
14:44 How did you go about sourcing Porsche electronics for your harnesses?
17:46 When and how did you decide to start wiring for a living?
24:15 What does Technica Racewire look like today? Location? Size?
30:21 Are you doing production runs on harnesses?
32:43 What brands of ECU are you aligning with?
36:15 Do you get into ECU configuration and setup?
40:40 What is a high pot tester?
41:20 How much of your business is business to business vs business to consumer?
45:12 Do you get involved in programming CAN messaging?
46:57 What’s the difference between a club level harness vs a motorsport harness?
53:31 What do you need to know to start working with Autosport connectors?
56:33 Understanding current through a connector and what size wire do we use?
1:08:48 Are DTM connectors still suitable for a motorsport harness?
1:12:50 The intricacy of working with Autosport connectors continued.
1:14:45 What’s your opinion on crimping vs soldering?
1:17:57 Using solder to pot an actuator or sensor.
1:20:45 Moisture ingress in connectors
1:23:31 What are the most common mistakes in building a harness?
1:30:36 What is star point earthing?
1:33:24 What do you use for your planning? Software?
1:38:50 Final 3 questions
#Technicaracewire #milspec #wiringharness #harness #porsche #porschewiring #ecu #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost #autosport
You can go a long way with club-level aero — and this is how to do it.
On this week's episode of Tuned In, ex-Mercedes F1 aerodynamicist and brand new HPA tutor Kyle Forster @KYLEENGINEERS helps you find big gains in performance by adding aero.
Kyle shares his journey of how he became an aerospace engineer with a passion for motorsports, he also discusses the challenges he faced while pursuing a PhD to break into Formula 1.
We get a first hand look at Kyle's time at Mercedes F1and the complexities of aerodynamics in high level racing, including the differences between CFD and wind tunnel testing and the challenges of validating aerodynamic performance in real-world conditions.
Kyle digs into club level aero packages showing us you don’t need a big budget or an engineering degree to gain performance and lap time. He now runs a consulting company ‘JKF Aero’ which can help you do exactly that.
We discuss the fundamental aerodynamic principles, the importance of selecting the right components, and practical methods for validating aerodynamic effectiveness that anyone can do.
Check out Kyle here:
YouTube: @KYLEENGINEERS
Instagram: @kyleengineers
WWW: jfkaero.com
👉 Use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Timestamps:
0:00 You Don't Need a PhD to Add SERIOUS Performance
3:47 How did you form an interest in cars?
7:40 Why was there an era where Formula SAE didn’t have aero?
12:45 How did your passion for aero grow from the Formula SAE team?
15:57 What is a degree, masters and PHD in Engineering?
19:21 How hard was it to land a job in F1?
22:06 What responsibilities do they give you when you join a team as a fresh aerodynamicist?
27:43 How do you end up with a cohesive aero package where all the parts work together?
31:27 What’s the process of testing these aero parts you design?
37:50 Why isn’t what you see in the wind tunnel not the same on the track?
48:23 What data and sensors do you have to validate aero on the track?
54:26 Why don’t we use a 1:1 model in the wind tunnel?
1:02:42 Why are there caps on CFD time?
1:05:06 How much does ride height affect downforce?
1:06:44 How long were you in F1 and how did you exit?
1:09:36 What does a typical consulting job look like for a high level motorsport team?
1:11:03 And what does that look like for a club level car?
1:14:13 Getting people to see the real benefit in aero?
1:18:19 What does a club level guy need to know?
1:24:56 How does a front splitter create downforce?
1:28:38 Do we need to think about spring rates when adding club level aero?
1:29:46 How do we even need our front splitter tunnels?
1:32:31 How do we validate our aero components are working at the club level?
1:41:19 Why is flow-vis not a viable technique at club level?
1:44:55 Final 3 questions
#aero #aerodynamics #kyleengineers #downforce #laptime #timeattack #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #wiring101 #datanerd #racecraft #cars #motorsport #racing #boost
Real-world performance is what matters when tuning a vehicle, but let’s not pretend the numbers on a dyno sheet mean nothing. The thing is… How can we trust one result from another? How are different dynos arriving at their calculated power and torque figures? And what’s the deal with drivetrain losses?
Todd Lewis from @mainlinedyno8306 is here to answer these questions and many more.
We’ve been using Mainline dynos for over a decade now, so when Todd flew over to our facility to carry out some upgrades on our four-wheel-drive hub dyno, it seemed like the perfect opportunity to sit him down and get some definitive answers about the sometimes confusing world of dynometers.
We start by discussing the history of dynos — both engine and chassis — covering the rapid pace of advancement over the last few decades, the different types available today and their pros and cons, as well as what modern dynos are now capable of.
We then jump into the heavy tech side, covering fascinating topics like inertia and load bearing systems, how much power some dynos can really handle, eddy current retarders, and plenty more.
The conversation rounds out with some great chat around properly strapping a car to a rolling road system, accounting for variances in drivetrain loss and how it should be calculated, as well as achieving complete consistency from run to run — probably the most important factor for any tuner.
Looking to Invest in a Dyno? Listen to This First.
Check out Mainline Dyno here:
Instagram: @mainlinedyno
Facebook: Mainline DynoLog Dynamometers
WWW: https://www.mainlinedyno.com.au
👉 Don’t forget, you can use the code ‘PODCAST500’ to get $500 OFF HPA's VIP Package: hpcdmy.co/podvip
Timestamps:
0:00 The TRUTH Behind Drivetrain Losses on the Dyno
4:05 How did you become interested in cars?
10:55 What has changed in the dyno space since you’ve been involved?
14:39 What is a vane dyno?
15:43 When did Mainline start focusing on dynos?
20:01 What drove demand for dynos in the early 2000s?
22:15 What other brands of dyno were around in the early 2000s?
24:09 What is an inertia dyno?
28:56 What is a load-bearing dyno, and how do we apply that load?
34:43 What is an eddy current retarder?
41:42 Why do we get varied dyno readings?
47:17 How do you train people to get consistency on their dynos?
57:19 Why is everyone using an eddy current retarder?
59:29 Do you get to a point where the rolling road doesn’t make sense?
1:03:20 How did the development of the hub dyno come about?
1:16:21 Hub dynos vs roller dynos?
1:23:15 How much power are we losing in the drivetrain?
1:37:04 Is there much demand for linked dynos?
1:41:16 When did you start with Mainline and can you give us an overview of Mainline today?
1:45:50 New operating system — why have you updated it?
1:52:27 Final three questions
#mainlinedyno #rollingroad #hubdyno #dyno #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost #dynometer #enginedyno
Think getting extra speed out of an aero package is just for the pros with all the money? It’s not... But you DO need to know what you’re doing.
This week, we’re sitting down with aero specialist Amir Bentatou from @RSFuture to discuss creating an effective aero package for your vehicle, how to actually test it, and much more.
It’s no secret that over the last decade or so, the use of aero components has really grown thanks to disciplines like time attack and hill climbing. The reality is, these days, if you want to be competitive on track, a solid aero package is no longer optional.
In the past, this usually meant consulting with experts, having your car scanned, and a custom aero package designed and built for your car — and that costs a lot of time and money. Things are different these days, though, and Amir dives straight into discussing how the average racer can build out a successful aero package to pick up a whole lot of speed using the 80/20 rule — that is, 80% of the performance for 20% of the money and effort.
We also discuss testing at the grassroots level through the use of wool tufting and flow-vis — these can be easily implemented, but you still need to understand what you’re looking at when the car comes back into the pits.
This conversation goes deep into the aero world, but also touches on Amir’s self-taught journey to get where he and RS Future are today, as well as his insight into the world of time attack and GT3 racing, which is something he’s been heavily involved in for a good few seasons now.
Check out Amir here:
Instagram: @rsfuture_amir, @rsfuture
Youtube: @RSFuture
WWW: HTTP://rsfuture.com
👉 Don’t forget, you can use the code ‘AMIR50’ to get $50 off HPA’s Aerodynamics Fundamentals course: hpcdmy.co/aerob
Timestamps:
0:00 The Secret to Effective Aero on a Tight Budget.
3:35 How did you become interested in cars and motorsport?
5:46 How did you transition into aerodynamics and composites?`
14:00 How did you get a job as a Motorsport driving instructor?
18:15 When and how did you start RS Future?
22:40 How did you decide what products you would focus on with RS Future?
25:53 Can you explain wool tuffs and how we can use them?
30:49 What is flow vis?
32:42 How do we go about developing an aero package for a race car based on a road car?
39:28 How do we produce front-end down force on a production road car?
54:15 How do you manage ride height and downforce?
59:02 What is a third member?
59:55 How important is having a flat floor?
1:06:05 Where do we want our ducts for oil coolers, trans coolers, and brakes
1:09:47 How are these aero parts constructed?
1:19:16 How did you move into race engineering for GT3?
1:21:33 What is the GT3 class?
1:36:22 Final three questions
#rsfuture #aerodynamics #timeattack #gt3 #highperformanceacademy #buildtunedrive #learndriveoptimise #datanerd #racecraft #cars #motorsport #racing #boost
Anyone who knows modified cars will have heard of the Ring Brothers, builders of some of the greatest custom machines ever conceived. With huge scope and an equally impressive price tag, these incredible vehicles take every single piece of a build to the next level. This week, we’re sitting down with the fabricator responsible for bringing these works of art to life.
Tuned In Podcast 137: Fabricating the BEST Custom Cars on Earth.
When it comes to fabrication, @Ringbrothers 's Ryan Fielding is all about the finer details, and that makes him the perfect person to head up the creation of this Wisconsin-based shop’s incredibly impressive builds that somehow perfectly mix subtle with insane.
Ryan kicks off the conversation by telling us how he got involved in fabrication and eventually made his way into the Ring Brothers shop. That naturally takes us to the company itself, and Ryan spends time discussing Ring Brothers’ ethos in building its unique resto-mod machines. This involves thinking outside the box, unmatched craftsmanship, and a whole lot of attention to detail.
With build budgets starting at around $600,000, we had to ask — how is that kind of money justified, how do they find the type of enthusiasts who want to spend the big bucks, and what do these customers get for their money?
Ryan also discusses his likes and dislikes in the fabrication game, Ring Brothers’ latest Aston Martin build, as well as what improvements in 3D printing and scanning technologies have done for his work.
With some great chats on TIG welding, and a dive into what separates an average fabricator from a great one, this episode is perfect for anyone interested in the fabrication game.
0:00 Intro
4:20 ow did you get interested in cars?
6:53 Do you have any formal qualifications?
9:27 What do you think separates a high level fabricator from an average fabricator?
13:42 What is it that keeps you passionate about fabrication?
17:14 Give us an overview of Ring Brothers?
23:54 When did Ring Bros become a big name in the custom car scene?
29:59 What does your typical build process look like?
34:26 How do you find the clients for these Sema level builds?
39:49 What does a Ring Brothers build cost?
41:26 How much input does the customer have in these builds?
48:55 How long does one of your big end builds take?
52:41 How do you keep price expectations updated wit your clients?
56:20 Why are Roadster Shop chassis so good?
1:02:34 Do you do wiring in house?
1:05:05 How long have Ring Brothers been using CAD, 3D scanning & modelling?
1:09:24 Why did you decide to bring CNC machining in house?
1:13:21 Give us the rundown on the Aston Martin DBS
1:17:36 How do you decide to use carbon fibre or steel? Pros and cons?
1:23:49 Is there still a place for a MIG welder in Motorsport Fabrication?
1:26:57 Top 3 TIG Welding tips?
1:33:53 What to look for when buying a MIG or TIG?
1:38:39 What fabrication equipment are you using on a daily basis?
1:44:29 Final 3 questions
#ringbrothers #fabrication #tigwelding #motorsport #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost
Brad shares his unique journey into motorsport, beginning with his determination to break into the high-stakes world of IndyCar — despite living on the other side of the planet. He dives into the challenges of performance engineering in a tightly regulated series and explains how teams still find speed in the most unlikely places.
From there, Brad transitions to Australia’s V8 Supercars, where he played a key role in a multi-championship-winning team. With firsthand insight, he breaks down what makes this series one of the most intense and exciting in global motorsport.
Brad’s career then takes a surprising turn as he shifts into the world of sustainable transport. Are EVs actually a con? Is there a future where performance and environmental responsibility can coexist? Brad shares his perspective.
Packed with talk on race car electronics, systems engineering, race strategy, and the future of speed, this episode is a great listen.
Check out Brad’s book here, and follow him here:
LinkedIn: Brad Eyes
👉 Don’t forget, you can use ‘‘FUTURE50’ to get $50 off HPA’s EV Fundamentals Course: hpcdmy.co/evb
Timestamps:
0:00 Does Fast Have a Future?
3:58 How did you get interested in cars and motorsport?
5:15 What was your role in Formula SAE?
8:20 How did you get into Indy Car and what was your role?
12:46 What are the parts that you can change in an Indy Car?
14:11 Indy car setup, road course vs oval
18:49 Does simulation react the same in the real world?
21:38 How long did you work in IndyCar, and what did your role progress to?
24:53 Moving to Australia and into V8 SuperCars
32:32 What was your role at DJR Team Penske?
33:54 How do you make race strategy calls?
43:28 What was next after V8 SuperCars?
46:21 What is transport decarbonisation?
49:11 What’s your opinion on electric vs hybrid vs internal combustion vehicles
1:11:34 Where do you want to go from here in your career?
#bradeyes #indycar #v8supercars #dickjohnsonracing #carbonneutral #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost
When @garage68motorsport isn’t working his day job at McLaren Formula 1, he’s in his workshop building an old VW Caddy… with a McLaren twin-turbo V8 in the rear tray, a Lamborghini gearbox, and Porsche 911 suspension.
Joel Vermiglio never set out to work in Formula 1 — in fact, he didn’t have any plans to get into motorsport at all. That changed in his late teens when he got into cars, went on to study, and eventually found his way into the industry.
In this conversation, Joel shares his unexpected journey to joining one of the world’s top F1 teams — proving that you don’t need a PhD in mechanical engineering to claw your way to the pinnacle of motorsport.
We also dig into the inner workings of a Formula 1 team, getting as much behind-the-scenes insight out of Joel as we can. From design and build to the day-to-day operations and the brutal pace of life in F1, it’s a fascinating look into what really goes on.
Finally, Joel walks us through his VW Caddy project — a Frankenstein build sparked by spotting a perfectly good(ish) McLaren race motor in the scrap bin at work. Now it’s a running, driving weapon with supercar DNA and a whole lot of DIY ingenuity.
Joel’s been using our courses to learn parts of the build process that he had little experience in, so this chat also offers an interesting look at how what HPA teaches gets applied in the real world.
Follow Joel here :
IG: @garage68motorsport
YT: Garage 68 Motorsport
WWW: http://mclaren.com/racing
👉 Don’t forget, you can use ‘JOEL100’ to get $100 off HPA’s Tuning Starter Package: hpcdmy.co/starterb
Timestamps:
0:00 The TRUTH About Life in Formula 1.
3:42 What was your passion growing up?
5:34 How and when did cars come on the scene?
9:23 How did a passion for electronics and cars lead to a career in motorsport
14:49 A career in motorsport can be a hard nut to crack. Just how challenging is it
23:36 Landing a job with McLaren GT
28:34 What’s involved in turning a supercar into a competitive GT race car?
33:29 What’s involved in being a systems engineer for McLaren F1?
43:30 What is a Cirrus tester and why do you use it?
44:59 Component reliability and lifespan in F1.
52:20 Crimping vs Soldering?
56:40 How has your role at McLaren F1 changed over the 9 years you’ve been with them?
1:01:25 Balancing F1 and family life.
1:10:54 What are your thoughts on where F1 is going?
1:16:34 McLaren’s development path in 2024.
1:19:57 Is Red Bull going to be lost without Adrian Newey?
1:22:54 Can you tell us why you’re an HPA member?
1:26:05 What is this project car you’re building?
1:34:52 Final three questions.
#mclaren #mclarenf1 #formula1 #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost #vwcaddy #twinturbov8
A lot has changed since we first had this week’s guest, Sasha Anis of @MountainPassPerformance, on the podcast back in 2022. This conversation gets us right up to date on where the industry sits now and what it’s going to look like in the very near future.
Sasha has a foot in both the EV and ICE worlds, driving an extremely quick hybrid 350Z race car as well as owning and operating both Mountain Pass Performance and On Point Dyno, so he’s the perfect person to get down into the weeds on the latest automotive tech without much of a bias one way or the other.
In this conversation, we jump straight into just how much things have changed since Sasha was on the podcast only a couple of years ago, discussing the good and the bad consequences of this rapid evolution. We also talk about where it’s all heading next. Is hybrid the way forward? And what about hydrogen? And how much better can EVs actually get?
The chat then turns towards the technical side as Sasha talks us through the basics of an EV system, covering all the major components and their purposes.
We also discuss why it’s so hard to extract extra power out of an EV system and how an amateur enthusiast should go about carrying out an EV swap if they want to actually get a good result.
Follow Sasha here:
IG: @mountainpassperformance
FB: Mountain Pass Performance
YT: Mountain Pass Performance
WWW: mountainpassperformance.com, onpointdyno.com
Don’t forget, you can use ‘ONPOINT50’ to get $50 off HPA’s EV Fundamentals Course: hpcdmy.co/evb
Timestamps:
0:00 Performance EVs — Do They Have a Future?
4:06 Who are you and where are you from?
5:26 Hybrid 350z
8:15 What has been the advances in electric vehicles in the last 2 years?
16:04 How do you see the resale value of older EV models being affected as tech improves rapidly?
22:24 Pros and cons Hybrid vs Full EV?
26:44 What are your thoughts on alternative fuels for internal combustion engines?
31:40 Where are the limitations of EV performance?
36:46 HPA EV course overview
41:47 Why can’t I make more power? And why does it overheat?
53:59 How to maintain battery life?
56:05 Motors and inverters: how do they work?
1:00:20 What does the BMS do?
1:02:52 How concerned should we be about EVs catching on fire?
1:08:13 Final elements that the HPA EV course covers
1:08:56 What’s involved in an EV swap?
1:22:44 Traction control in an EV vehicle?
1:26:42 Can the average home enthusiast perform an EV conversion?
1:31:00 Final 3 questions
#ev #electricvehicle #evracing #tesla #evswap #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost
What’s the deal with diesel tuning? Is it really that different? Yes… But also no.
This week Matt Smith of @JustAutosMechanical joins us to discuss all things diesel tuning — operating principles, combustion temperature, reflash options, and a whole lot more.
Just Autos, based out of Queensland, Australia, specialises in diesel performance tuning — but perhaps not the platforms you’re more familiar with.
Matt has gone down the Japanese diesel path — specifically Toyota’s Hilux, Prado, and Landcruiser platforms. These workhorses are common on Aussie roads, and Matt is at the very forefront of developing their stout Toyota diesel motors to get the absolute best performance from them.
In this conversation, Matt tells us how he got into the business, and how it’s changed and improved to become the very professional outfit it is today.
We then jump into the real meat and potatoes of this episode — a very deep dive into the world of diesel engines and tuning.
Matt takes the time to really go through how a diesel engine operates and how that differs from a petrol engine, as well as why we need fuel pulses, the general dos and don'ts of diesel tuning, controlling combustion temperatures, and the usefulness (or not) of exhaust gas temperature sensors in a diesel application.
Matt is a great communicator and manages to get tech heavy without leaving the real world, so if you’ve always wanted to better understand diesel technology and how to get the absolute most performance out of it, this episode is a great place to start.
Follow Matt here:
IG: @justautosmechanical
FB: Just Autos
YT: Just Autos Mechanical
TKTK: justautos
WWW: justdieselperfomance.com.au
Don’t forget, you can use JUST50 to get $50 off HPA’s Diesel Tuning Starter Package: hpcdmy.co/dieselpackageytb
Timestamps:
0:00 The Dos and Don’ts of Diesel Tuning.
3:41 How did you become interested in cars?
10:57 Are we losing key mechanical skills these days?
15:30 What drove you towards the diesel world?
22:48 How does a diesel engine work?
26:15 Diesel engine timing.
29:16 What is pilot injection for in a diesel engine?
32:36 Diesel fuelling and tuning.
40:12 EGTs on a diesel engine.
50:47 Common rail diesel fuel pressure.
54:19 Diesel fuel system failures. Are people pushing them too hard?
1:03:32 How much power can you pull out of a turbo diesel with just a tune?
1:06:03 How do you go about tuning different engines for different applications?
1:09:39 What instrumentation should we add to help monitor our tuned diesel engine?
1:13:33 Diesel engine flow, intercoolers, exhaust etc.
1:14:39 What do we need to know about sizing a turbo for diesel engines?
1:23:05 Why does Toyota not have good support for reflashing?
1:26:23 How are you reverse engineering the factory Denso ECUs?
1:33:19 What do you think about emission devices?
1:38:49 What does Just Autos look like today?
1:46:03 Final three questions.
#toyota #toyotadiesel #dieseltuning #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost #1KD #toyota1kd #hilux #prado #landcruiser300
Mark Boxsell has had a varied and fascinating career in the performance industry, and he’s ready to unpack it all in this episode of Tuned In.
Having grown up on a farm in rural Australia that instilled a drive towards resourcefulness and ingenuity, by his early twenties, Mark Boxsell would latch on to the emerging EFI revolution and create his own fuel injection system for his personal Mazda rotary. And that was just the start.
Mark went on to invent one of the world’s first aftermarket standalone ECUs, which we all know today as Haltech. In this episode, we get straight into the mind-blowing history of how Haltech came about, discussing what was involved in creating it, the incredibly basic tools he had at his disposal to make it happen, and how it actually worked.
We next discuss Mark’s stint developing a unique V10 Formula 1 engine that used rotary valves instead of the traditional poppet valves. Mark goes into detail about how it worked, and why we never saw it on the grid. Then it’s time to talk about ignition systems, which Mark knows a lot about as one of the founders of M&W Ignition — which supplies series like Australia’s top-tier V8 Supercars.
We finish the episode off by moving into Mark’s current venture, GT Pumps. This company specialises in stock-frame turbocharger upgrades, which are currently aimed squarely at the WRX and Evo markets. This gets into some heavy turbo tech, covering the benefits of journal-bearing turbos, stock turbo system capabilities, and more.
If you’re into tuning history and love a dose of nostalgia, this episode with Mark Boxsell is an absolute must-listen.
Follow Mark here:
IG: @gtpumps
FB: GTpumps
WWW: gtpumps.com.au
Don’t forget, you can use GTPUMPS100 to get $100 off HPA’s Tuning Starter Package: hpcdmy.co/starterbyt
Timestamps:
0:00 The Best Stock Turbo System?
3:43 How did you get into the automotive industry?
7:57 Why did you decide to try and make your own EFI? And how?
12:53 How did that first EFI system perform?
15:13 How did Haltech start?
23:47 How does the HC11 chip compare to modern ECU chips?
26:49 Once you got the ECU working, how did you sell it?
28:52 Why did you decide to use bar graphs for the interface?
33:23 What were the biggest challenges building those first ECUs?
36:28 Marketing first Haltec ECU continued.
43:15 Why are there so many ECU manufacturers from Australia?
46:05 When and how did you leave Haltec?
53:52 Can you explain the different ignition systems?
59:05 M&W ignition system.
1:00:43 Transition from electronics to F1 engine development
1:05:04 Had the rotary valve been tried by other competitors?
1:09:10 Why did this rotary valve never make it to the track?
1:12:25 How did your current business GTpumps come about?
1:13:25 Why focus on a stock frame turbocharger?
1:17:52 Are journal-bearing turbos dead?
1:21:53 Are you looking to produce stock frame turbos for different models?
1:28:12 Final three questions.
#GTpumps #haltech #formula1 #v10 #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost
Blow off valves and wastegates are fairly simple in their operation, but correctly sizing and fitting them requires a lot of careful consideration if you want to get the most out of your turbocharged engine.
This week, Gregg Jones of @TiALSport1 — someone who’s been in the turbocharging game since the mid-eighties — is here to get us up to speed on these simple yet crucial components.
Gregg started his career in performance cars in the dark ages of turbo technology. It was the mid-eighties, and there weren’t a whole lot of good options around for the aftermarket boost industry — but working with rudimentary laggy turbos and cast-iron wastegates got Gregg thinking that he could create something much better — so he did. TiAL Sport was formed in 1993 and the company quickly blossomed as turbocharged European and Japanese imports began to filter into the mainstream.
In this conversation, Gregg talks us through those early days, touching on how much room for improvement he saw and how his company was able to step up the game year after year. Gregg discusses how his products are designed, tested, and made — as well as where he sees the industry going in the future.
We then move into the tech-focused section of the episode, where Gregg drops knowledge on all things turbocharging — especially when it comes to speccing, fitting, and getting the most out of blow off valves and external wastegates. There are some real nuggets of gold to be found in this conversation, and anyone who wants to better understand boosted engine applications is going to be better off for listening to it.
Follow Gregg here:
IG: @tialsport, @xonarotor
FB: TiAL Sport
WWW: tialsport.com, xonarotor.com
Don’t forget, you can use TIAL50 to get $50 off HPA’s EFI Fundamentals course: hpcdmy.co/efifundb
Timestamps:
0:00 UNTAPPED Potential? BOVs and Wastegates Decoded
3:14 How did you form an interest in the automotive industry?
8:10 Move to Florida and exposure to turbocharged vehicles
10:24 Early cast iron HKS wastegate
15:34 Why did it take so long for V bands to become the standard?
17:23 What materials did you move to instead of cast iron?
19:12 How have we overcome turbine back pressure?
21:39 What was the design process for these wastegates?
29:21 What are the challenges in designing a wastegate?
34:13 What is the actual benefit to a blow off valve?
40:52 Where’s the best place to put your blowoff valve?
48:13 How do blow off valves work with MAF sensors?
52:32 Do we need to tune the blow off valve for the application?
54:30 Do you have a size guide for blow off valves?
56:17 How do we choose the right wastegate?
1:01:46 What’s the best way to mount a wastegate?
1:04:36 Wastegate springs explained
1:11:56 Is there still room to improve wastegates and blow off valves?
1:16:05 How did you start working with Robert Young and Xona Rota?
1:21:59 What’s next for turbo technology?
#tial #tialsport #wastegate #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost #bov #blowoffvalve
On this episode of Tuned In, we catch up with M26 Engineering’s Matthew Bernasconi, who we first interviewed back in 2022 just as he was leaving stable employment at offroad legends Kibbetech to build his own business.
Matthew has designed and machined parts for the automotive and aerospace industries his entire adult life. If you’ve ever encountered any of his popular social media channels, you’ll probably already have a good understanding of just how talented he is.
This skill was what first had us reaching out to appear on the podcast two years ago, and considering that episode (linked below) ended on a cliffhanger with Matthew just about to strike out on his own, we decided it was time to fire up the mics again and get caught up on how it’s all gone.
This episode is filled with great technical chats about 3D modelling, machining, and component design, all mixed in with quality business discussions that’ll provide a whole lot of inspiration and insight if you’re ever thinking about starting your own company in the performance industry.
Listen to Matthew's first episode here: hpcdmy.co/mattb
Follow Matthew here:
IG: @M26Engineering, @matt_eight26
FB: M26 Engineering
WWW: HTTP://www.m26engineering.com
Don’t forget, you can use M26ENG50 to get $50 off HPA’s 3D Modeling & CAD for Motorsport course: hpcdmy.co/CADb
Time Stamps:
0:00 Using your automotive skills to start your own business.
3:30 Who are you and what do you do?
4:48 What were you doing at Kibbetech?
16:22 What did you learn at Kibbetech that you then applied to your business?
18:27 How did you decide the time was right to start your business?
28:05 Did you start off just doing the design portion and outsourcing the machining?
33:30 Is making one-off CNC parts financially viable?
42:06 Did you have a business plan?
44:37 You’ve been running the business for two years, What’s that journey been like?
54:37 How did you transfer from rapid prototyping to production-style work?
1:00:35 How have you decided what makes and models to support?
1:06:58 How big are these production runs? How many parts are you making at a time?
1:11:18 Why are your parts better/different from the competition?
1:17:10 What’s your opinion on business-to-business or direct-to-consumer sales?1:20:10 How does product development work?
1:25:25 Liability on your products, Is it a concern?
1:28:09 What does M26 look like in 5 years?
1:35:38 Final three questions.
#m26engineering #CAD #3dmodelling #CNC #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost #mattbernasconi
New technologies have enhanced our ability to create stronger, lighter, and better components since the earliest days of motorsport. Recently, we've been seeing another great leap forward in tech, with the 3D scanner being one of the main drivers behind it. Now that these devices are only getting cheaper and easier to use, is it time you picked one up and started pushing the boundaries of what you can build?
On this episode of Tuned In, we sit down with Gabrielle Williams of @peel3d , one of the bigger players in the rapidly evolving 3D scanning space.
Straight out of high school, Gabrielle joined the US Navy and found her way into a position as a nuclear operator aboard an aircraft carrier. After her tour finished, she gained a mechanical engineering degree and found herself working for Creaform and its sister company, Peel 3D.
While Creaform is focused on high-end large-form scanners, Peel 3D is aimed at the consumer market — in other words, us. In this conversation, Gabrielle talks through the basics of the technology, covering how different systems work and which one would suit your application best, why the prices vary so wildly between systems, as well as the metrics that matter like frame rate, field of view, and data points.
Gabrielle also breaks down some of the ways we can be most effective in the workshop with a 3D scanner, where the sweet spot is price-wise for the average enthusiast, and what to expect from this technology in the coming years.
You might not have considered 3D scanning before, but now that you don’t need to take out a second mortgage to afford one, is it time to consider adding a 3D scanner to your workshop?
Follow Peel 3D here:
IG: @peel.3D
FB: Peel 3D
YT: youtube.com/c/peel3d
WWW: peel-3d.com
Don’t forget, you can use PEEL50 to get $50 off HPA’s 3D Scanning for Motorsport course: hpcdmy.co/3Dscanb
Time Stamps:
0:00 Intro
4:20 What’s your background that lead you to working for Peel 3D?
8:00 Overview of Peel 3d and Creaform?
12:47 what training options are there for learning how to 3D scan?
13:52 How do industries use these 3D scanners?
23:13 How does a 3D scanner actually work?
33:45 Technical aspects that affect performance of a scanner?
42:20 What do we need to know when choosing the right scanner for our needs?
43:50 What sort of PC/computer power do we need to run these scanners?
45:40 How do we get our scan into CAD software?
51:40 Where do you see 3D scanning tech going in the future?
54:02 Final 3 questions
#3dscanning #peel3d #usnavy #cad #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost
hpcdmy.co/CADb
Creating a turbo manifold isn’t THAT hard but creating one that doesn’t fall to pieces in harsh motorsport conditions is a different story. In this episode, we sit down with @FullRaceTurbo 's founder, Geoff Raicer — someone who understands turbocharger and manifold development better than most and is more than happy to share what he’s learnt... plus a whole lot more.
Full Race has been around for a long time and has always been known for building some of the best turbo manifolds and turbo kits available — primarily for the Honda, Mitsubishi, and Nissan markets. Geoff and Full Race were even instrumental in bringing Borg Warner’s line of EFR turbochargers to the aftermarket and yet, despite that successful history, you won’t find a single fabricated exhaust manifold for sale on Full Race’s shop these days — so what happened?
In this episode, we chart Geoff’s journey towards founding Full Race just as the modified import scene began to explode, how his business evolved through some challenging years, and what it’s morphed into today — a very different beast from its early days.
This is a fascinating story that saw Geoff and his team pivot in an interesting direction during the 2008 financial crisis, involving themselves directly with Borg Warner and later Ford in the development and testing of the 2.3 inline-four and 3.5 V6 EcoBoost engines years before the public saw them. This relationship has continued and we now see a completely different Full Race that puts the majority of its eggs in the Ford basket, pumping out some of the best Raptor 3.5-litre Ecoboost go-fast parts seen anywhere in the world.
This episode touches on a wide range of subjects that touches on a wide range of subjects — from the limitations faced by Geoff in the early days of turbocharging, to the secrets to building manifolds that don’t fail, to some seriously technical discussions around turbochargers, working with OEMs, the ins and outs of Ford’s EcoBoost 3.5 litre V6, plus a whole lot more.
Follow Geoff here:
IG: @fullracemotorsports
FB: Full-Race Motorsports
YT: Full-Race Motorsports
WWW: HTTP://full-race.com
Don’t forget, you can use RACE50 to get $50 off HPA’s 3D Modelling & CAD for Motorsport course: hpcdmy.co/CADb
Time Stamps:
0:00 Intro
3:28 How did you get into cars?
6:43 Why were earlier turbo manifolds cracking and how did you fix them?
19:02 Supporting the turbo
22:55 Road to starting Full Race, building turbo manifolds
27:28 Why did you go down the road of robotic welding?
30:02 Where is Full Race at today, Ford Ecoboost?
33:51 What is turbo lag?
36:38 Twin scroll vs single scroll
40:40 Why do OE manufacturers still focus on the aftermarket?
50:23 Building relationship with Ford continued
56:02 OEM’s relationship with aftermarket and performance upgrades.
58:53 Weak points of the 3.5L V6 Ford Ecoboost engines
1:06:24 What does Full Race’s product line look like for the F150?
1:11:32 Challenges involved in casting products. Big upfront costs.
1:15:45 Why did you completely change Full Race’s direction to solely focus on the Ford Ecoboost platform?
1:19:24 What’s the difference between Gen2 and Gen3?
1:21:13 Are there any other trucks you’re looking to make kits for?
1:26:00 Where do you see turbo technology heading
#ecoboost #raptor #fordraptor #manifold #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #dontletthesmokeout #wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost #fullrace
Many enthusiasts want to build something unique simply for the sake of “being different”. And while that’s fine, different doesn’t necessarily mean better — or even good, for that matter. @MorganClarkeDesign1 doesn’t have that problem, though. What he creates is definitely different… But it’s also very, very good.
Morgan Clarke isn’t your typical vehicle designer and fabricator — he tends to avoid CAD and 3D scanning, he doesn’t have any formal training, and he’s certainly had a rough road to get to where he is today — yet he’s a highly regarded and sought after builder in the world of offroad vehicles.
Starting his career in industrial fabrication, cars were only an occasional side hobby for Morgan. That is, until people in the industry started to recognise his design and fabrication talents and enticed him away from the boring 9-5 and into a motorsport-focused fab shop. Morgan talks us through his challenging journey from directionless troublemaker to the owner of a successful and very much in-demand design and fabrication shop.
In this episode, Morgan takes the time to drop some great advice on how we can all improve our fab skills, and discusses why he doesn’t feel the need to use CAD or 3D scanning in his work, bucking the industry-wide trend towards harnessing tech in the build process.
We then get into the juiciest part of the conversion, as Morgan goes deep into the details on his most well-known build, an incredible Lamborghini twin turbo V10-powered Range Rover Velar Prerunner, known as the MCD1 Dakar Prototype.
This machine is a testament to the idea that beautiful form follows well-executed function, and every inch of the jaw-dropping build is an absolute work of art, from the chassis, to the suspension, to the mid-rear mounted boosted V10 capable of 2000hp. We’re able to dig deep into this project’s inner workings and the concepts that make this desert-destroying weapon what it is.
With great discussions around the pros and cons of different materials, off-road suspension system choices, what makes his vehicles so fast and capable and plenty more, this episode featuring Morgan Clarke is a must-listen.
Follow Morgan here:
IG: @morganclarkedesign1
YT: MORGAN CLARKE DESIGN
TK: morganclarkedesign1
WWW: shopmcd1.com
Don’t forget, you can use MCD100 to get $50 off HPA’s Motorsport Fabrication Starter Package: hpcdmy.co/fabpackageb
Time Stamps:
0:00 Intro
4:03 How did you get into cars?
7:00 Where does your engineering knowledge come from?
13:26 What sort of off-road vehicles are you building?
17:47 How did you learn to fabricate?
23:32 Welding Chromoly
31:25 How did you get into motorsport fabrication?
37:06 Tips on how to develop fab skills
41:48 How and when do you use CAD?
47:15 Fabricated vs billet
50:34 What is the Dakar Prototype and how did the concept come to life?
58:56 Pros and Cons of Independent rear suspension vs live rear axle
1:05:09 Engine package
1:09:45 Drivetrain
1:13:42 What electronics are you using?
1:15:30 Designing and manufacturing complex parts
1:18:43 How do you feel about such a work of art being beaten up when driven in the desert?
1:22:44 Overview of MCD and how you got it to what it is today?
1:36:03 Final 3 questions
#mcd1 #dakarprototype #rangerover #rangerovervelar #prerunner #lamborghini #highperformanceacademy #buildtunedrive #learndriveoptimise ##dieseltuning #motorsportfabrication #datanerd #racecraft #cars #motorsport #racing #boost #offroad #v10 #twinturbo
Have you ever wondered how small aftermarket companies can drastically improve on parts from OEMs and big players like Garrett or Borg Warner that have massive R&D departments and even bigger budgets behind them? If you ask this week’s guest, Robert Young of @forcedperformance768 and @xonarotor8618 , he’ll tell you: “We try harder and we’re better at it”.
Of course, the reality isn’t quite that simple… Luckily we’ve got a full two hours to dig into this topic and many others surrounding the world of performance turbocharging.
On this episode of Tuned In, we start by looking at how Robert became the turbocharger guru he is today as the name behind Forced Performance and Xona Rotor — the latter formed in partnership with Greg Jones of Tial Sport.
This is a story that involves years spent studying physics and mechanical engineering, as well as hands-on experience at turbo shops and with his own projects that ranged from old Ford Fairlanes and fast air cooled VW drag cars, to the early DSM drag world of rapid Mitsubishi Eclipses.
Both Robert’s companies produce ultra high performance aftermarket turbochargers and turbocharger components for a range of vehicles, and as one of the main brains behind these sought-after products, Robert is an absolute goldmine of turbo knowledge.
This means that the conversation quickly dives very deep into the world of boost, discussing a huge range of topics — journal vs ball bearing, billet compressor wheels, compressor maps, turbo sizing, and so much more.
This episode is a true turbo tech info dump in the best way possible. If you have any interest in going fast, don’t sleep on this fascinating conversation with a big brain of the forced induction world.
Follow Robert here:
IG: @forcedperformance, @xonarotor
FB: Forced Performance Turbochargers, Xona Rotor
WWW: forcedperformance.shop, xonarotor.com
Don’t forget, you can use FORCED25 to get $25 off HPA’s Boost Control Tuning Course: hpcdmy.co/boostb
Time Stamps:
0:00 Intro
3:35 How did you get involved with cars?
8:52 Where did the passion for turbocharging come from?
20:15 Starting your own turbocharger business?
25:10 How hard was it to design a cast stainless steel exhaust housing?
29:06 Ball bearing vs journal bearing turbos
38:51 Forced Performance overview
43:35 Turbos for Subaru’s EJ engine
47:10 How did Xona Rotor start?
51:42 Why didn’t you copy Garrett’s bearing technology?
59:46 Why is Xona Rotor its own company?
1:01:51 How are Xona Rotor turbos so good, frustrations of copied turbos
1:11:40 Development process for the compressor wheels?
1:31:34 Evolution of turbine wheels
1:44:06 How do we find the right size turbo?
1:59:22 Final three questions
#forcedperformance #xonarotor #turbo #turbocharger #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune ##wiring101 #dieseltuning #datanerd #racecraft #cars #motorsport #racing #boost #dsm #mitsubishi
Creating high-end race cars and parts for a living is a dream for many of us, but how do you turn that dream into a reality? We don’t have all the answers, but we can pick the brains of the people who’ve pulled it off, like this week’s guest, Joe Scarbo.
Joe Scarbo of @scarboperformance8623 and Scarbo Vintage began his love affair with all things motorised like many of us — young and elbow-deep in a deconstructed radio control car trying to fix and improve it. This episode first covers Joe’s early days as he gained an appreciation for all things automotive through his love of both RC cars and go-karting. After a few too many crashes in the kart, Joe steered his passions towards the engineering side of the game, and began building his first car completely from scratch.
With little experience and zero computer power, Joe designed and built a four-seater 350 SBC-powered off-road sand car that’s still hitting the dunes to this day, despite it being finished before Joe was even out of his teens.
While he was still studying mechanical engineering at university, Joe found himself employed as a fabricator and machinist at a high-end race shop. From there, his career began to snowball as his design skills became more and more in demand. We dig into the design side of Joe’s career in this conversation, discussing the creation of strong and light wheels, chassis’, and everything in between.
After that, Joe talks us through different fabrication and manufacturing processes, discussing some of the pros and cons around CNC, water and laser cutting, notching, materials, and more. This chat also goes into the business side of the equation as we attempt to answer age-old questions like: how do you accurately quote your work? And when is it better to just outsource certain jobs?
The star of this episode, though, is undoubtedly Joe’s current passion project, the SV1 Rover. This monster off-roader is a marvel of engineering, and a machine that Joe has labelled the world’s first “hyper truck”. Whether he’s right or wrong about that we’ll leave up to the listener, but either way, the details we get into on this 30-inch travel go-anywhere-at-very-high-speeds beast is well worth a listen. Find out how it was designed, what powers it, what it’s capable of, and much more in this episode of Tuned In.
Check out Method Race Wheels here: methodracewheels.com
Follow Scarbo Performance here:
IG: scarboperformance
FB: Scarbo Performance Corp
WWW: HTTP://www.scarboperformance.com
Don’t forget, you can use SCARBO50 to get $50 off HPA 3D Modelling course: hpcdmy.co/CADb
Time Stamps:
0:00 Intro
3:30 How did you get interested in cars?
8:32 What did you become passionate about through your mechanical engineering degree?
14:27 Designing a car at 19, how did you figure out how strong to make all the components?
18:20 What happened after your degree?
25:31 Design work for Method Wheels
31:35 How do you balance weight, strength vs looks when designing wheels?
36:27 Starting your own company
52:18 Overview of Scarbo Performance
1:08:48 SV Rover — what was the initial concept?
1:18:13 How much did RC cars influence your design?
1:46:43 Engine configuration in the SV Rover and an EV option?
1:50:01 Did the SV Rover work out of the box or were there teething issues?
1:57:28 Where is the SV Rover at? Are you going to be offering this to customers?
1:58:59 Final three questions
#sv1rover #sv1 #offroad #baja #scarboperformance #highperformanceacademy #buildtunedrive #learndriveoptimise #learntotune #enginebuilding101 #datanerd #racecraft #cars #motorsport #racing #boost #motorsportfabrication #fabrication


