Uploaded February 2026 | Updated November 2026, 15 hours ago
The landing gear is the principal support of the airplane while not in flight. The most common type of landing gear consists of wheels, but airplanes can also be equipped with floats (for water operations) or skis (for landing on snow).
Â
Wheeled landing gear in most general aviation airplanes consists of three wheelsâtwo main wheels and a third wheel positioned either at the front or rear of the airplane. Landing gear with a wheel mounted at the rear of the airplane is called CONVENTIONAL landing gear, but are commonly referred to as âtailwheelsâ or âtaildraggersâ. A special endorsement is required to fly tailwheel airplanes. When the third wheel is located on the nose, it is called a ânosewheelâ, and the design is referred to as a TRICYCLE gear. This is the most common configuration for flight training. đđ
Â
A steerable nosewheel or tailwheel permits the airplane to be controlled throughout all operations while on the ground. Most aircraft are steered by manipulating the rudder pedals, whether nosewheel or tailwheel. Additionally, some aircraft are steered by differential braking where brakes are to one side.
Â
Both conventional and tricycle configurations are considered FIXED landing gear systems. Itâs exactly how it soundsâthey are in a âfixedâ position (beyond steering). However, some aircraft landing gear can be retracted to reduce drag. This type is simply called a RETRACTABLE landing gear. We will explore this system next. đŹ
#flygoldseal #studentpilot #flighttraining #privatepilot #learntofly #pilottraining #flightschool #generalaviation #cfi #landinggear #aviation
The landing gear is the principal support of the airplane while not in flight. The most common type of landing gear consists of wheels, but airplanes can also be equipped with floats (for water operations) or skis (for landing on snow).
Â
Wheeled landing gear in most general aviation airplanes consists of three wheelsâtwo main wheels and a third wheel positioned either at the front or rear of the airplane. Landing gear with a wheel mounted at the rear of the airplane is called CONVENTIONAL landing gear, but are commonly referred to as âtailwheelsâ or âtaildraggersâ. A special endorsement is required to fly tailwheel airplanes. When the third wheel is located on the nose, it is called a ânosewheelâ, and the design is referred to as a TRICYCLE gear. This is the most common configuration for flight training. đđ
Â
A steerable nosewheel or tailwheel permits the airplane to be controlled throughout all operations while on the ground. Most aircraft are steered by manipulating the rudder pedals, whether nosewheel or tailwheel. Additionally, some aircraft are steered by differential braking where brakes are to one side.
Â
Both conventional and tricycle configurations are considered FIXED landing gear systems. Itâs exactly how it soundsâthey are in a âfixedâ position (beyond steering). However, some aircraft landing gear can be retracted to reduce drag. This type is simply called a RETRACTABLE landing gear. We will explore this system next. đŹ
#flygoldseal #studentpilot #flighttraining #privatepilot #learntofly #pilottraining #flightschool #generalaviation #cfi #landinggear #aviation










