Uploaded December 2013 | Updated November 2026, 1 day ago
Santa joined me in the shop and we made a wooden Twisted Christmas Tree! It's made from unfinished cedar so it even smells like a Christmas tree. Below is a Parts List with basic instructions if you would like to build one of your own. Merry Christmas and Happy Holidays from The Carmichael Workshop.
Click this link for more photos and info:
thecarmichaelworkshop.com/2013/12/twisted-christmas-tree-holiday.html
Parts List:
50 Cedar Strips 3/4" wide x 3/8" thick x 14-1/8" long
2-Piece Stand 10" wide x 3.5" tall
1 3/8" Hardwood Dowel 26" long
1 Star
Steps:
1. Cut the 14-1/8" long cedar strips in pairs starting at 14", decreasing by 1/4" length for each pair. Save all pieces after cutting, including the cutoff pieces, because they will all be used on the tree. For example, when you cut a 10" piece for the bottom half of the tree, the 4" cutoff piece will be used in the top half of the tree.
2. Cut 3/4" dado half laps in the center of each piece. (Be sure to do a test fit first.)
3. Assemble stand and dowel rod. (Note that dowel rod thickness can vary from the store so always drill a test hole for a test fit.)
4. Cross-lap each pair of cedar strips in the middle and drill a 3/8" hole through the center, then slide it onto the dowel rod. Continue until at the top of the tree. (Again, drill a hole in a test piece and do a test fit.)
5. Drill a 3/8" hole in the base of the star and slide it on top. Note that you may need to cut the dowel rod to fit.
--------------------------------------------------
Recommended Tools (affiliate links):
amzn.to/2dy8cXn - SawStop Table Saw
amzn.to/2dy82iN - Craftsman Sliding Miter Saw
amzn.to/2dnLL3V - Dewalt Planer
amzn.to/2czmO8S - Craftsman Router
amzn.to/2dnMmmq - Dewalt Trim Router
amzn.to/2d5eGMi - Dewalt Jigsaw
amzn.to/2qMEEJf - Ridgid Spindle Sander
amzn.to/2dvdsrX - Ridgid Random Orbital Sander
amzn.to/2cYSxOS - Dewalt Palm Sander
amzn.to/2d29D1Z - Jet 14" Bandsaw
amzn.to/2dnIUYG - 14 Gallon Shop Vac
amzn.to/2cYRKxt - Ridgid Drill and Driver Combo
amzn.to/2dnLiPb - Dewalt Scroll Saw
amzn.to/2cYRMWf - 1" Belt Sander
amzn.to/2dnzGQP - 8" Drill Press
amzn.to/2dy8Hkx - Lathe
amzn.to/2dnLyxK - Lathe Tools
amzn.to/2dvi41g - Kreg K4 Pocket Hole Jig
amzn.to/2dvgvAF - Glubot Glue Bottle
amzn.to/2dnKZ7b - Babe-Bot Glue Bottle
amzn.to/2czmszj - Momentary Footswitch
amzn.to/2dnAXHr - Freud 50 Tooth Thin Kerf Sawblade
amzn.to/2czmXcG - Microjig Gripper
amzn.to/2d5cQvh - Microjig Grip Blocks
amzn.to/2d5cPXW - MJ Splitter Thin Kerf
amzn.to/2dvgrAF - RZ Mask
amzn.to/2dfpl4f - Bench Cookies
----------------------------------------------------------
Recommended Supplies (affiliate links):
amzn.to/2di8UVz - Harbor Freight Flashlight
amzn.to/2cVkn1Q - Clock Insert
amzn.to/2d2ab7G - 3M General Purpose 45 Spray Adhesive
amzn.to/2dvfZ5x - Stick Fast Medium CA Glue
amzn.to/2d29MlU - Stick Fast Activator for CA Glue
amzn.to/2dfnBbd - Titebond II
amzn.to/2dnLvSn - Loctite Epoxy
amzn.to/2dfrpZE - Transtint Dye
amzn.to/2cYTwyG - Deft Spray Lacquer
amzn.to/2dnD9Pv - Johnson Paste Wax
amzn.to/2dfkbVT - 10-14 Gallon Shop Vac Bag 3pk
--------------------------------------------------
Follow me on:
Etsy - etsy.com/shop/carmichaelworkshop
Facebook - facebook.com/TheCarmichaelWorkshop
Google+ - plus.google.com/u/0/111000674985715386662
Instagram - instagram.com/carmichaelwkshp
LumberJocks - lumberjocks.com/scarmike67
Pinterest - pinterest.com/carmichaelwkshp/pins
Tumblr - thecarmichaelworkshop.tumblr.com
Twitter - twitter.com/carmichaelwkshp
Website - thecarmichaelworkshop.com
WoodTube - woodtube.ning.com/profile/SteveCarmichael
--------------------------------------------------
Music from YouTube Library!
Santa joined me in the shop and we made a wooden Twisted Christmas Tree! It's made from unfinished cedar so it even smells like a Christmas tree. Below is a Parts List with basic instructions if you would like to build one of your own. Merry Christmas and Happy Holidays from The Carmichael Workshop.
Click this link for more photos and info:
thecarmichaelworkshop.com/2013/12/twisted-christmas-tree-holiday.html
Parts List:
50 Cedar Strips 3/4" wide x 3/8" thick x 14-1/8" long
2-Piece Stand 10" wide x 3.5" tall
1 3/8" Hardwood Dowel 26" long
1 Star
Steps:
1. Cut the 14-1/8" long cedar strips in pairs starting at 14", decreasing by 1/4" length for each pair. Save all pieces after cutting, including the cutoff pieces, because they will all be used on the tree. For example, when you cut a 10" piece for the bottom half of the tree, the 4" cutoff piece will be used in the top half of the tree.
2. Cut 3/4" dado half laps in the center of each piece. (Be sure to do a test fit first.)
3. Assemble stand and dowel rod. (Note that dowel rod thickness can vary from the store so always drill a test hole for a test fit.)
4. Cross-lap each pair of cedar strips in the middle and drill a 3/8" hole through the center, then slide it onto the dowel rod. Continue until at the top of the tree. (Again, drill a hole in a test piece and do a test fit.)
5. Drill a 3/8" hole in the base of the star and slide it on top. Note that you may need to cut the dowel rod to fit.
--------------------------------------------------
Recommended Tools (affiliate links):
amzn.to/2dy8cXn - SawStop Table Saw
amzn.to/2dy82iN - Craftsman Sliding Miter Saw
amzn.to/2dnLL3V - Dewalt Planer
amzn.to/2czmO8S - Craftsman Router
amzn.to/2dnMmmq - Dewalt Trim Router
amzn.to/2d5eGMi - Dewalt Jigsaw
amzn.to/2qMEEJf - Ridgid Spindle Sander
amzn.to/2dvdsrX - Ridgid Random Orbital Sander
amzn.to/2cYSxOS - Dewalt Palm Sander
amzn.to/2d29D1Z - Jet 14" Bandsaw
amzn.to/2dnIUYG - 14 Gallon Shop Vac
amzn.to/2cYRKxt - Ridgid Drill and Driver Combo
amzn.to/2dnLiPb - Dewalt Scroll Saw
amzn.to/2cYRMWf - 1" Belt Sander
amzn.to/2dnzGQP - 8" Drill Press
amzn.to/2dy8Hkx - Lathe
amzn.to/2dnLyxK - Lathe Tools
amzn.to/2dvi41g - Kreg K4 Pocket Hole Jig
amzn.to/2dvgvAF - Glubot Glue Bottle
amzn.to/2dnKZ7b - Babe-Bot Glue Bottle
amzn.to/2czmszj - Momentary Footswitch
amzn.to/2dnAXHr - Freud 50 Tooth Thin Kerf Sawblade
amzn.to/2czmXcG - Microjig Gripper
amzn.to/2d5cQvh - Microjig Grip Blocks
amzn.to/2d5cPXW - MJ Splitter Thin Kerf
amzn.to/2dvgrAF - RZ Mask
amzn.to/2dfpl4f - Bench Cookies
----------------------------------------------------------
Recommended Supplies (affiliate links):
amzn.to/2di8UVz - Harbor Freight Flashlight
amzn.to/2cVkn1Q - Clock Insert
amzn.to/2d2ab7G - 3M General Purpose 45 Spray Adhesive
amzn.to/2dvfZ5x - Stick Fast Medium CA Glue
amzn.to/2d29MlU - Stick Fast Activator for CA Glue
amzn.to/2dfnBbd - Titebond II
amzn.to/2dnLvSn - Loctite Epoxy
amzn.to/2dfrpZE - Transtint Dye
amzn.to/2cYTwyG - Deft Spray Lacquer
amzn.to/2dnD9Pv - Johnson Paste Wax
amzn.to/2dfkbVT - 10-14 Gallon Shop Vac Bag 3pk
--------------------------------------------------
Follow me on:
Etsy - etsy.com/shop/carmichaelworkshop
Facebook - facebook.com/TheCarmichaelWorkshop
Google+ - plus.google.com/u/0/111000674985715386662
Instagram - instagram.com/carmichaelwkshp
LumberJocks - lumberjocks.com/scarmike67
Pinterest - pinterest.com/carmichaelwkshp/pins
Tumblr - thecarmichaelworkshop.tumblr.com
Twitter - twitter.com/carmichaelwkshp
Website - thecarmichaelworkshop.com
WoodTube - woodtube.ning.com/profile/SteveCarmichael
--------------------------------------------------
Music from YouTube Library!










