Tutorial - Rally 110 and 210 Power Meter Pedals: Manually Enter Pairing Mode @Garmin.Singapore
Tutorial - Rally 110 and 210 Power Meter Pedals: Manually Enter Pairing Mode  @Garmin.Singapore
Uploaded July 2026 | Updated November 2026, 1 day ago
▶️ Purpose
Learn how to manually place your Garmin Rally 110 and Rally 210 power meter pedals into pairing mode. This video demonstrates the procedure whether the pedals are removed from the bike or still installed, allowing you to reconnect them with a compatible Garmin device.

▶️ Audience
Garmin Rally 110 users
Garmin Rally 210 users
Cyclists setting up or re-pairing power meter pedals

▶️ What You'll Learn
0:00 Intro
0:15 Remove the left pedal
0:33 Hold the pedal level
0:35 Rotate to vertical
0:42 Return to level
0:47 Rotate vertically again
0:54 Return to level
0:58 Verify pairing mode
1:03 Keep pedals installed
1:06 Lean bike left
1:12 Return upright
1:17 Lean bike right
1:23 Finish pairing motion
1:34 Ending

▶️ Outcome
After completing this tutorial, you'll know how to manually activate pairing mode on your Rally power meter pedals, making it easy to reconnect them with your compatible Garmin cycling device.

▶️ FAQs
Q: When should I manually enter pairing mode?
A: Use this procedure when your Rally pedals aren't detected or when you need to pair them with a new compatible Garmin device.

Q: Do I need to remove the pedals from my bike?
A: No. The video demonstrates both methods: with the left pedal removed and while the pedals remain installed on the bike.

Q: What tool is required if I remove the pedal?
A: A 15 mm pedal wrench is required to remove the left pedal.

Q: How do I know the pedals are in pairing mode?
A: The LED on the left pedal flashes purple, indicating pairing mode has been activated.

Q: Which pedal flashes during pairing mode?
A: The left pedal flashes purple to indicate the Rally pedals are ready to pair.

▶️ Related Links
Official Website: https://www.garmin.com.sg/
Buy Now:
https://www.garmin.com.sg/products/intosports/rally-rs110/
https://www.garmin.com.sg/products/intosports/rally-rs210/
Need help? Visit our service center: support.garmin.com/en-SG

#Garmin #Rally110 #Rally210 #PowerMeter #Cycling #Bluetooth #Tutorial #Garmin
Tutorial - Rally 110 and 210 Power Meter Pedals: Manually Enter Pairing ModeHow to Start Track and Save Workouts on Forerunner 170 - TutorialHow to Set Up Wi-Fi Directly on Garmin fēnix 9 _TutorialTutorial – Edge Explore 3: Features Overview | Easy-to-use Bike Computer with Superior NavigationTutorial - Enduro 4: How to Set Up Your Garmin Smartwatch and Pair It with Garmin ConnectTutorial - How to Replace the Battery on Your Garmin Cadence SensorEdge 1060 cycling computer with voice control | GarminTutorial - Enduro 4: Garmin Smartwatch Navigation Tips | Touchscreen, Menus & Quick ControlsSpy Pole | The Ultimate Sonar ComboTutorial - Garmin LiveScope 2 Complete Setup: Calibrate & Tune Settings EasilyOK Garmin: How to Use Voice Commands on Garmin Edge Explore 3 Plus - TutorialHow to Pair Garmin Forerunner 170 with Phone and Garmin Connect - Tutorial
Garmin Singapore |

Tutorial - Rally 110 and 210 Power Meter Pedals: Manually Enter Pairing Mode

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER