Uploaded January 2026 | Updated November 2026, 4 days ago
#SpeedSensor #BatteryReplacement #CR2032
▷Purpose
This video shows you how to correctly replace the CR2032 battery in your Garmin Speed Sensor to ensure reliable performance.
▷Audience
Ideal for cyclists using the Garmin Speed Sensor, Garmin beginners, or anyone replacing a sensor battery for the first time.
▷Time Code & Chapters
00:00 Introduction & required battery (CR2032)
00:14 Remove silicone sleeve and open battery cover
00:39 Remove old battery, wait 30 seconds, insert new battery
00:56 Lock battery cover and confirm LED status
▷Steps Summary
• Remove the silicone sleeve to access the sensor
• Rotate and remove the battery cover
• Remove the old battery and wait 30 seconds
• Insert a new CR2032 battery with correct polarity
• Align the markers and lock the battery cover
▷FAQ
• Q: What battery does the Garmin Speed Sensor use?
A: The Speed Sensor uses one CR2032 coin cell battery.
• Q: What should I do if the sensor does not respond after replacing the battery?
A: Make sure you waited 30 seconds before installing the new battery and that the polarity is correct.
• Q: Do I need a special tool to open the battery cover?
A: No. A coin or any similar flat object can be used.
• Q: How do I know the battery replacement was successful?
A: After replacement, the LED will flash red and green briefly, then flash green and stop, indicating the sensor is ready to use.
▷Related Links:
Official Site: https://www.garmin.com.sg/
Buy now: garmin.com/en-US/p/641230/pn/010-12843-30
Need help? Visit our service center: support.garmin.com
#SpeedSensor #BatteryReplacement #CR2032
▷Purpose
This video shows you how to correctly replace the CR2032 battery in your Garmin Speed Sensor to ensure reliable performance.
▷Audience
Ideal for cyclists using the Garmin Speed Sensor, Garmin beginners, or anyone replacing a sensor battery for the first time.
▷Time Code & Chapters
00:00 Introduction & required battery (CR2032)
00:14 Remove silicone sleeve and open battery cover
00:39 Remove old battery, wait 30 seconds, insert new battery
00:56 Lock battery cover and confirm LED status
▷Steps Summary
• Remove the silicone sleeve to access the sensor
• Rotate and remove the battery cover
• Remove the old battery and wait 30 seconds
• Insert a new CR2032 battery with correct polarity
• Align the markers and lock the battery cover
▷FAQ
• Q: What battery does the Garmin Speed Sensor use?
A: The Speed Sensor uses one CR2032 coin cell battery.
• Q: What should I do if the sensor does not respond after replacing the battery?
A: Make sure you waited 30 seconds before installing the new battery and that the polarity is correct.
• Q: Do I need a special tool to open the battery cover?
A: No. A coin or any similar flat object can be used.
• Q: How do I know the battery replacement was successful?
A: After replacement, the LED will flash red and green briefly, then flash green and stop, indicating the sensor is ready to use.
▷Related Links:
Official Site: https://www.garmin.com.sg/
Buy now: garmin.com/en-US/p/641230/pn/010-12843-30
Need help? Visit our service center: support.garmin.com

![How to Customize Controls and Garmin Pay on Forerunner 170 - Tutorial
Instantly access essential tools like Assistance and Garmin Pay right from your wrist! Learn how to fully customize your watch controls list.
Optimize your daily training with these simple steps: [See Below]
* Press and hold the LIGHT/CTRL button to open the default controls menu.
* Hold the UP/MENU button to open the custom control options.
* Select Add Controls and use UP/DOWN buttons to find new utilities.
* Choose Reorder Controls or Remove Controls to organize your layout.
#Garmin #Forerunner170 #GarminPay #ControlsMenu #Smartwatch #singapore How to Customize Controls and Garmin Pay on Forerunner 170 - Tutorial](https://i.ytimg.com/vi/3P7rTRafAVs/mqdefault.jpg)








