Uploaded February 2020 | Updated November 2026, 4 days ago
Motorized gimbals essentially revolutionized low-budget filmmaking and video production with their ability to capture silky smooth camera moves. And in the past few years the size and cost of them has come down dramatically, making them easily accessible even for hobbyists. And while the smaller single handed ones might be easy to use there can actually be some stability issues because of that single handle. By adding in the ability to use a second handle, we give ourselves a second touch point, and can remove some of the shortfalls of a single handle.
Part you’ll need:
1x SmallRig Rod Clamp Mount (be sure to find one that fits YOUR gimbal): amzn.to/2V9i4fv
2x SmallRig Bolt On Rosette Adapters: amzn.to/2SDTd1D
2x Handgrips: youtu.be/-osnXESPEHE
This is not exactly an inexpensive build, and it adds weight and size to a small form factor gimbal, but I've been really pleased with the results and I think if you want to add to the production capabilities and stability of your single handed gimbal it's a piece of gear you should consider. And while I used my DIY handles and some relatively pricey SmallRig pieces I'm sure you could use this same method but with cheaper or DIY parts.
We're on the interwebs:
Facebook: facebook.com/droimedia
Twitter: twitter.com/droimedia
Instagram: instagram.com/droimedia
Sign up for our newsletter: droimedia.com/signup
And don't forget to visit us online at https://www.DroiMedia.com.
Check out all the other gear we use to make these videos: droimedia.com/kit
Note: Some of the links above are affiliate links, and purchasing items from these links allows us to continue creating content like this - and the best part is that there is no additional cost to you! Thank you!
Motorized gimbals essentially revolutionized low-budget filmmaking and video production with their ability to capture silky smooth camera moves. And in the past few years the size and cost of them has come down dramatically, making them easily accessible even for hobbyists. And while the smaller single handed ones might be easy to use there can actually be some stability issues because of that single handle. By adding in the ability to use a second handle, we give ourselves a second touch point, and can remove some of the shortfalls of a single handle.
Part you’ll need:
1x SmallRig Rod Clamp Mount (be sure to find one that fits YOUR gimbal): amzn.to/2V9i4fv
2x SmallRig Bolt On Rosette Adapters: amzn.to/2SDTd1D
2x Handgrips: youtu.be/-osnXESPEHE
This is not exactly an inexpensive build, and it adds weight and size to a small form factor gimbal, but I've been really pleased with the results and I think if you want to add to the production capabilities and stability of your single handed gimbal it's a piece of gear you should consider. And while I used my DIY handles and some relatively pricey SmallRig pieces I'm sure you could use this same method but with cheaper or DIY parts.
We're on the interwebs:
Facebook: facebook.com/droimedia
Twitter: twitter.com/droimedia
Instagram: instagram.com/droimedia
Sign up for our newsletter: droimedia.com/signup
And don't forget to visit us online at https://www.DroiMedia.com.
Check out all the other gear we use to make these videos: droimedia.com/kit
Note: Some of the links above are affiliate links, and purchasing items from these links allows us to continue creating content like this - and the best part is that there is no additional cost to you! Thank you!










