Uploaded September 2019 | Updated September 2026, 2 weeks ago
In this tutorial we're going to make some awesome LED tube lights. You've probably seen these around - Quasar Science, CAME-TV, and many other brands make a variety of them - from several inches to 4'. They're cool, versatile, and can go into lots of tight spaces that a traditional film or video light wouldn't be able to. I built 4x 18" lights but you could make any length you want, and you could swap out the daylight LEDs I used for RGB ones or whatever light color / temp you need for your project. The way I built them these come out to under $25/ foot of finished light. Because these are enclosed they will get slightly warm to the touch, but by attaching our wire to both ends it should cut down on the heat significantly (my first batch was only wired at one end and they got HOT), but like with all lights just be careful!
MATERIALS:
Frosted acrylic tubing: bit.ly/2lCamdL
End caps: mcmaster.com/9567k16 ***
LED light strips: amzn.to/2NUlijn
12V adapter: amzn.to/2trJeCD
Extra wire: amzn.to/2ZMEUrC
Wooden dowel rod - 1/2"
***Contact us about end caps, we have a buttload left over!
CHECK OUT PART 2 (MOUNT AND DIMMER): youtu.be/DmrjjAEt7vQ
Share some pics with us on social media once you're done building these, we'd love to see them!
Facebook: facebook.com/droimedia
Twitter: twitter.com/droimedia
Instagram: instagram.com/droimedia
Sign up for our newsletter: droimedia.com/signup
And don't forget to visit us online at https://www.DroiMedia.com.
Check out all the other gear we use to make these videos: droimedia.com/kit
Note: Some of the links above are affiliate links, and purchasing items from these links allows us to continue creating content like this - and the best part is that there is no additional cost to you! Thank you!
In this tutorial we're going to make some awesome LED tube lights. You've probably seen these around - Quasar Science, CAME-TV, and many other brands make a variety of them - from several inches to 4'. They're cool, versatile, and can go into lots of tight spaces that a traditional film or video light wouldn't be able to. I built 4x 18" lights but you could make any length you want, and you could swap out the daylight LEDs I used for RGB ones or whatever light color / temp you need for your project. The way I built them these come out to under $25/ foot of finished light. Because these are enclosed they will get slightly warm to the touch, but by attaching our wire to both ends it should cut down on the heat significantly (my first batch was only wired at one end and they got HOT), but like with all lights just be careful!
MATERIALS:
Frosted acrylic tubing: bit.ly/2lCamdL
End caps: mcmaster.com/9567k16 ***
LED light strips: amzn.to/2NUlijn
12V adapter: amzn.to/2trJeCD
Extra wire: amzn.to/2ZMEUrC
Wooden dowel rod - 1/2"
***Contact us about end caps, we have a buttload left over!
CHECK OUT PART 2 (MOUNT AND DIMMER): youtu.be/DmrjjAEt7vQ
Share some pics with us on social media once you're done building these, we'd love to see them!
Facebook: facebook.com/droimedia
Twitter: twitter.com/droimedia
Instagram: instagram.com/droimedia
Sign up for our newsletter: droimedia.com/signup
And don't forget to visit us online at https://www.DroiMedia.com.
Check out all the other gear we use to make these videos: droimedia.com/kit
Note: Some of the links above are affiliate links, and purchasing items from these links allows us to continue creating content like this - and the best part is that there is no additional cost to you! Thank you!
