Uploaded January 2016 | Updated September 2026, 1 hour ago

---

In this Airsoft [TUTORIAL] we learn how to perfectly shim your AEG Gears with the best method available, the "Bevel-To-Pinion", with an easy step-by-step procedure.
Drastically improve your AEG sound, battery consumption, overall Gears' smoothness and performances!

EXTRA NOTES:
BEARING: When reducing up-and-down play with Bearing, please try to obtain al least 0.3mm as specified in the [TUTORIAL], but if you feel so, try reducing the play a little more. What you're aiming for is the least amount of up-and-down play of the Gears with Bearings spinning freely alongside them.
When reducing the up-and-down to less than 0.3mm with Bearing, it's mandatory that you test the Bearings' rotation alongside the spinning of the Gears with both Gearbox's Shells closed and screwed in tight.
CUT-OFF/PISTON MATCHING: When you're done shimming, before closing the Gearbox, there's one more test you can make. Check if the Sector Gear interferes with the Cut-Off lever and matches well with the Piston's teeth, if not, try readjusting the Sector height accordingly at the best of your ability, you might need to re-set the Spur height in order to keep enough contact with the Sector, but try to preserve the Bevel position. It is best to have less contact between the Gears than altering the Bevel-To-Pinion match.
SAME BRAND OF GEARS/PINION: If possibile try to work with Gears and Pinion of the same brand, that will ensure you best compatibility and results.

"JOIN THE INVASION", SUPPORT CHUPACABRA OUTDOOR!
chupacabraoutdoor.wordpress.com/donate-with-paypal

[ITA] Guida allo Spessoramento AEG da Softair con il metodo Conico-A-Pignone, sottotitolato in italiano.
--------------------
Follow Us at:
facebook.com/ChupacabraOutdoor
youtube.com/REAPERSSOFTAIR
facebook.com/REAPERSSOFTAIR
reaperssoftair.wordpress.com
--------------------
THANKS FOR WATCHING!
--------------------
Credits:
Chance, Luck, Errors in Nature, Fate, Destruction As a Finale di Chris Zabriskie è un brano autorizzato da Creative Commons Attribution (https://creativecommons.org/licenses/...)
Fonte: chriszabriskie.com/reappear
Artista: chriszabriskie.com