Uploaded August 2014 | Updated November 2026, 6 hours ago
This is a water repellency test of Turtle Wax ICE Paste Wax against Meguiar's Ultimate Paste Wax. The ICE Paste is on the left side of the panel, the middle section contains no wax and is used as a control, and Meguiar's Ultimate Paste is on the right side of the panel.
Note: This is an extended test. It takes a few minutes of wetting for the repellency of Ultimate Paste Wax to begin to be affected in the test. For a shorter video, see my second test video here: youtu.be/m_t2KXIhgzs
Prior to the test, the entire hood was clayed and wiped down with 91% isopropyl alcohol mixed with water to remove all wax residues from the panel. The panel was then rinsed with water and dried using a clean microfiber drying towel. The ICE side was allowed 5 minutes to dry on the paint before removing. The Meguiar's Ultimate was allowed 20 minutes to dry on the paint before removing. 18 hours were allotted for both waxes to cure before being rinsed by water for testing.
Temperature was 75*F upon application and removal. Both waxes received their own clean microfiber towels upon removal of dried wax residue.
Note: This video is not a representation of how protected the paint's surface is. This is merely an observation based on repellency and beading.
This is a water repellency test of Turtle Wax ICE Paste Wax against Meguiar's Ultimate Paste Wax. The ICE Paste is on the left side of the panel, the middle section contains no wax and is used as a control, and Meguiar's Ultimate Paste is on the right side of the panel.
Note: This is an extended test. It takes a few minutes of wetting for the repellency of Ultimate Paste Wax to begin to be affected in the test. For a shorter video, see my second test video here: youtu.be/m_t2KXIhgzs
Prior to the test, the entire hood was clayed and wiped down with 91% isopropyl alcohol mixed with water to remove all wax residues from the panel. The panel was then rinsed with water and dried using a clean microfiber drying towel. The ICE side was allowed 5 minutes to dry on the paint before removing. The Meguiar's Ultimate was allowed 20 minutes to dry on the paint before removing. 18 hours were allotted for both waxes to cure before being rinsed by water for testing.
Temperature was 75*F upon application and removal. Both waxes received their own clean microfiber towels upon removal of dried wax residue.
Note: This video is not a representation of how protected the paint's surface is. This is merely an observation based on repellency and beading.










