WYOMINGWOODTURNER | Turning a Thin Bradford Pear Bowl with Sam Angelo @WYOMINGWOODTURNER | Uploaded April 2022 | Updated October 2024, 9 hours ago.
Sam turns a 7" Bradford Pear bowl to a wall thickness of 3mm/1/8 inch. Fun to watch......Please subscribe for a weekly YouTube, woodturning video....and share this video.
See links to other related videos published by Sam Angelo in past years.
Two more videos on turning "thin".....
Natural Edge Holly Bowl
youtube.com/watch?v=pQsz9mYbKa0&t=1s
Natural Edge, Wet-turned test bowl
youtube.com/watch?v=_27WsSs8hbw&t=550s
Chapter Time Codes Click on the time to jump to your desired topic in the video Enjoy....
00:00 Introduction
00:48 Explanation of today’s project
01:29 Establishing a tenon
02:52 Starting to profile the bottom of the bowl
04:32 Working on the rim and inside of the bowl
07:03 Turning decorative grooves with a point tool
10:12 Starting to turn this bowl thin
15:43 Final cuts on the bottom/establishing proper thickness
19:33 Looking at the thickness using a light
20:46 Reverse chucking to finish the foot
23:23 The completed bowl and conclusion
Thanks for watching my videos-
Please find my work on the following sites wyomingwoodturner.com
ETSY etsy.com/shop/wyomingwoodturnercom
Send me a comment or question via e-mail: @---- samandcheryle@gmail.com
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt.
Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Sam turns a 7" Bradford Pear bowl to a wall thickness of 3mm/1/8 inch. Fun to watch......Please subscribe for a weekly YouTube, woodturning video....and share this video.
See links to other related videos published by Sam Angelo in past years.
Two more videos on turning "thin".....
Natural Edge Holly Bowl
youtube.com/watch?v=pQsz9mYbKa0&t=1s
Natural Edge, Wet-turned test bowl
youtube.com/watch?v=_27WsSs8hbw&t=550s
Chapter Time Codes Click on the time to jump to your desired topic in the video Enjoy....
00:00 Introduction
00:48 Explanation of today’s project
01:29 Establishing a tenon
02:52 Starting to profile the bottom of the bowl
04:32 Working on the rim and inside of the bowl
07:03 Turning decorative grooves with a point tool
10:12 Starting to turn this bowl thin
15:43 Final cuts on the bottom/establishing proper thickness
19:33 Looking at the thickness using a light
20:46 Reverse chucking to finish the foot
23:23 The completed bowl and conclusion
Thanks for watching my videos-
Please find my work on the following sites wyomingwoodturner.com
ETSY etsy.com/shop/wyomingwoodturnercom
Send me a comment or question via e-mail: @---- samandcheryle@gmail.com
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt.
Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
