WYOMINGWOODTURNER | Turning a Cherry Bowl (Part 1) Woodturning with Sam Angelo @WYOMINGWOODTURNER | Uploaded October 2022 | Updated October 2024, 16 hours ago.
Part 1 ~ Turning the Bottom of a Cherry Bowl
In this video Sam begins to turn a dry cherry bowl. In this video-Part 1-he starts with the underside of the bowl and establish an expansion recess and applies a finish. In Part 2 he will turn the top of the bowl and continue to focus on his scraping technique.
See the timecodes below to see your favorite topic....
Interested in a Robust, American Beauty lathe? I have one ready to ship in the "dealer stock" lathe program. Contact me for details: samandcheryle@gmail.com or call 307-431-5395
Chapter timecodes-click on the time to jump to the desired topic.
00:00 Introduction
00:22 Cutting up the bowl blank at the bandsaw
01:00 Drilling at the drill press for the screw chuck
02:10 Mounting the bowl blank on a screw chuck
04:25 The turning begins…
05:00 Marking and turning the tenon
06:12 Truing up the blank
09:00 A little about form and design
10:00 Focus on scraping
12:28 Forming the expansion recess
17:50 Shaping the ogee on the underside of the bowl
19:15 Dealing with torn grain
21:18 The push cut to clean up the surface
25:21 Scraping the underside of the piece
29:35 SANDING!!!!
29:55 Adding a bit of texturing
31:00 Applying a finish
31:49 Conclusion See part 2 next week
Thanks for watching my videos-
Please find my work on the following sites wyomingwoodturner.com
ETSY etsy.com/shop/wyomingwoodturnercom
Send me a comment or question via e-mail: @---- samandcheryle@gmail.com
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt.
Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Part 1 ~ Turning the Bottom of a Cherry Bowl
In this video Sam begins to turn a dry cherry bowl. In this video-Part 1-he starts with the underside of the bowl and establish an expansion recess and applies a finish. In Part 2 he will turn the top of the bowl and continue to focus on his scraping technique.
See the timecodes below to see your favorite topic....
Interested in a Robust, American Beauty lathe? I have one ready to ship in the "dealer stock" lathe program. Contact me for details: samandcheryle@gmail.com or call 307-431-5395
Chapter timecodes-click on the time to jump to the desired topic.
00:00 Introduction
00:22 Cutting up the bowl blank at the bandsaw
01:00 Drilling at the drill press for the screw chuck
02:10 Mounting the bowl blank on a screw chuck
04:25 The turning begins…
05:00 Marking and turning the tenon
06:12 Truing up the blank
09:00 A little about form and design
10:00 Focus on scraping
12:28 Forming the expansion recess
17:50 Shaping the ogee on the underside of the bowl
19:15 Dealing with torn grain
21:18 The push cut to clean up the surface
25:21 Scraping the underside of the piece
29:35 SANDING!!!!
29:55 Adding a bit of texturing
31:00 Applying a finish
31:49 Conclusion See part 2 next week
Thanks for watching my videos-
Please find my work on the following sites wyomingwoodturner.com
ETSY etsy.com/shop/wyomingwoodturnercom
Send me a comment or question via e-mail: @---- samandcheryle@gmail.com
I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt.
Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s
For more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72
Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
