Tuning the DJI FPV Hyperlow // RPM filtering on Betaflight 4.1 @Furadi
Tuning the DJI FPV Hyperlow // RPM filtering on Betaflight 4.1  @Furadi
Uploaded September 2019 | Updated September 2026, 2 hours ago
#djifpv #djihdfpv

Been working tuning the new FW on the HD quad. Still has a bobble when running the HQ 6" props but it's good enough for me. btw this is Air Unit footage recorded in 4:3.

Some notes -

- There's no felt latency / stuttering anywhere in this park on 25mw with my current antenna setup. (AXII's on quad, crosshair on goggles) On stock antennas it lags all over the place.

- The RPM filter has come a long way... I've got all but 1 dterm notch filter off and the motors are coming down cold.

- I've been flying in 4:3 mode. As vocal as I am about hating 4:3 with the DJI goggles it's actually pretty good.
Tuning the DJI FPV Hyperlow // RPM filtering on Betaflight 4.1Do you really need on-board recording with DJI FPV? | FPV OASISFirst 2020 practice session! | Hyperlow RS + Caddx VistaNastiest Sidehill Ive Ever Done 🤯 | am32 RC4wd Bully 2 MOAWhy the hell did I buy a TBS Fusion module? 😳 // Tuesday Vlog3 Hornet HD Flip Flops | Caddx Vista DVRFlashing am32 FW on my Emax ESC | RPM Lock | Silent Crawler ESCDealing with Torque Twist | Element RC Enduro Builders Kit#SENDIT with the DJI FPV system?! // VlogTorqueFPV Hornet HD Build #2 | DJI FPV Jedi TrainerTCv1.5 Technical Trail Run | Filmed with the Osmo Pocket 3Eagle Hills Raceway FPV Drone Footage // #Teknotakeover / Cinesplore
Furadi |

Tuning the DJI FPV Hyperlow // RPM filtering on Betaflight 4.1

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER