Uploaded July 2012 | Updated September 2026, 2 weeks ago
Website: vorticesdynamics.com
Continuing the tuning process for resonance. I have added now all components and measure the working frequency. I also add a special component which will provide capacitance between both secondary's
Summary about the experimental setup
The reasoning is based Nicola Tesla's and Oliver Oliver Heaviside's definition for the longitudinal propagation of power.
1. Driving Tank circuit has to be counter clockwise. Apply the right hand rule and you will see that the lower part of the secondary is south or Earth and the top of the coil is North, positive polarity
2. Receiving Tank circuit has to be clockwise. The counter rotating coil to the driving coil is natures way of realising energy.
3. Coil, copper ratio has to be 1:1. That was stated by Nicola Tesla and should optimise longitudinal propagation of electrical potential.
4. Based on the wireless Power transmission and the one wire power transmission system the ideal conductor would reach from the ground of the earth to the Ionosphere, where electrical potential is enormous and highly conductive. The Plasma Dome is simulating that.
5. The plasma dome has 3 functions. 1. provide capacitance to improve longitudinal propagation of power, the change of frequency does prove that
PI/2*c. The Plasma has two functions. A. it will visualize the energy flow and B. It will draw energy from the field.3. The capacitor plates are asymmetric in build. I expect at higher power levels to show some effects. The documentation on my website will give your more details.
My website for your research is theoldscientist.co.uk
Website: vorticesdynamics.com
Continuing the tuning process for resonance. I have added now all components and measure the working frequency. I also add a special component which will provide capacitance between both secondary's
Summary about the experimental setup
The reasoning is based Nicola Tesla's and Oliver Oliver Heaviside's definition for the longitudinal propagation of power.
1. Driving Tank circuit has to be counter clockwise. Apply the right hand rule and you will see that the lower part of the secondary is south or Earth and the top of the coil is North, positive polarity
2. Receiving Tank circuit has to be clockwise. The counter rotating coil to the driving coil is natures way of realising energy.
3. Coil, copper ratio has to be 1:1. That was stated by Nicola Tesla and should optimise longitudinal propagation of electrical potential.
4. Based on the wireless Power transmission and the one wire power transmission system the ideal conductor would reach from the ground of the earth to the Ionosphere, where electrical potential is enormous and highly conductive. The Plasma Dome is simulating that.
5. The plasma dome has 3 functions. 1. provide capacitance to improve longitudinal propagation of power, the change of frequency does prove that
PI/2*c. The Plasma has two functions. A. it will visualize the energy flow and B. It will draw energy from the field.3. The capacitor plates are asymmetric in build. I expect at higher power levels to show some effects. The documentation on my website will give your more details.
My website for your research is theoldscientist.co.uk
