Uploaded August 2024 | Updated November 2026, 2 days ago
The blue tube (workpiece) is clamped to the fixture (green jaws).
The yellow spindle of the orange core bit has two movements: rotation and translation. These movements are controlled by the operator using a hand drilling machine (gray).
The video shows how to clamp the workpiece and how to adjust the angle between the workpiece and the spindle.
The clamping fixture ensures that the workpiece axis always in the horizontal plane created by the workpiece axis and the spindle axis.
This design was made based on video:
youtu.be/wtJn1SmvQdo
Inventor files of this video:
mediafire.com/file/hxvtr60uiz92hj4/TubeNotchingCutterInv.zip/file
The blue tube (workpiece) is clamped to the fixture (green jaws).
The yellow spindle of the orange core bit has two movements: rotation and translation. These movements are controlled by the operator using a hand drilling machine (gray).
The video shows how to clamp the workpiece and how to adjust the angle between the workpiece and the spindle.
The clamping fixture ensures that the workpiece axis always in the horizontal plane created by the workpiece axis and the spindle axis.
This design was made based on video:
youtu.be/wtJn1SmvQdo
Inventor files of this video:
mediafire.com/file/hxvtr60uiz92hj4/TubeNotchingCutterInv.zip/file










