Uploaded November 2026 | Updated November 2026, 3 hours ago
Over the past few weeks, I've been restoring this TRS-80 Model III, which I purchased on eBay as a non-working system. I'm absolutely delighted with how it's coming along!
The machine has 48K of RAM, an RS-232 serial port, and I've now got both the FreHD and Gotek working perfectly. I'm also planning to install a full-height 5.25-inch floppy drive to complete the setup.
The biggest challenge was a faulty CRT video driver board, which has now been replaced. The display is working beautifully, and everything else is functioning perfectly, including the keyboard, which doesn't have a single faulty key.
The video and audio featured here are courtesy of TRSVID, a brilliant project developed by George and available on his GP2000 website. George has generously made the source code and detailed instructions available, making it a fantastic resource for fellow TRS-80 enthusiasts.
Over the past few weeks, I've been restoring this TRS-80 Model III, which I purchased on eBay as a non-working system. I'm absolutely delighted with how it's coming along!
The machine has 48K of RAM, an RS-232 serial port, and I've now got both the FreHD and Gotek working perfectly. I'm also planning to install a full-height 5.25-inch floppy drive to complete the setup.
The biggest challenge was a faulty CRT video driver board, which has now been replaced. The display is working beautifully, and everything else is functioning perfectly, including the keyboard, which doesn't have a single faulty key.
The video and audio featured here are courtesy of TRSVID, a brilliant project developed by George and available on his GP2000 website. George has generously made the source code and detailed instructions available, making it a fantastic resource for fellow TRS-80 enthusiasts.




![Commodore 64 running PRG file from your Windows computer using Kung Fu Flash and EF3USB software
Commodore 64 running PRG file from your Windows computer using Kung Fu Flash and EF3USB software
Kung Fu Flash Firmware 1.20p (PAL version) or available for NTSC but this still in Beta.
Software running on my 64C EF3USB.PRG
Software running on my Windows 10 x64 2020TH2 ef3usb.exe
Syntax for executing a PRG file from your Widnows PC
ef3usb com[x] e filename.prg
where x is the com port number assigned to your Kung Fu Flash
These files are from the project GitHub page https://github.com/KimJorgensen/KungFuFlash
Kung Fu Flash boards are also available from https://silvestron.com/browse/products/consoles/commodore-64/ Commodore 64 running PRG file from your Windows computer using Kung Fu Flash and EF3USB software](https://i.ytimg.com/vi/D_Jb4YgU7Ow/mqdefault.jpg)





