Uploaded November 2026 | Updated November 2026, 3 hours ago
In this video, I walk through the bed leveling process for the TRONXY CRUX 1S — a compact 180×180×180 mm 3D printer with a 275°C direct extruder and up to 300 mm/s high-speed printing. Whether you’re setting up the printer for the first time or troubleshooting first-layer adhesion, this step-by-step leveling guide is designed to help you get a clean, consistent first layer.
🛒 Get the TRONXY CRUX 1S here:
👉 store.tronxy.com/product-8000190.html
What’s covered in this video:
• Manual leveling basics — using the paper method and adjustment nuts under the platform
• Auto-leveler height adjustment — how to set the sensor and trigger point correctly
• Z-offset fine-tuning on the touch screen for the perfect first layer
• Quick tips to avoid common leveling mistakes
Why the CRUX 1S is beginner-friendly for leveling:
The CRUX 1S features a PEI heat bed (up to 110°C) and a straightforward leveling workflow. Many users report that the auto-level system “works quite well,” and Z-offset is easy to set directly from the touch screen. For manual adjustment, the large hand-screwing nuts under the bed make tramming more convenient and labor-saving.
Printer specs at a glance:
• Build volume: 180 × 180 × 180 mm
• Max speed: 300 mm/s(recommended 150 mm/s)
• Nozzle temp: up to 275°C;Bed temp: up to 110°C
• Nozzle diameter: 0.4 mm;Layer precision: Z-axis 0.0625 mm
• Slicer support: Cura、Simplify3D
Useful links:
• CRUX 1S product page: store.tronxy.com/product-8000190.html
• Tronxy FAQ & leveling reference: tronxy3dprinter.com/pages/faq
Timestamps:
0:00 Intro
0:30 Why leveling matters on the CRUX 1S
1:15 Manual leveling prep
3:00 Auto-leveler adjustment
5:30 Z-offset on touch screen
7:00 First-layer test
8:30 Final tips
If this helped you get a better first layer, hit Like and Subscribe for more TRONXY CRUX 1S guides. Drop a comment if you run into any leveling issues — I’ll try to help.
#TRONXY #CRUX1S #3DPrinting #BedLeveling #3DPrinterTutorial
In this video, I walk through the bed leveling process for the TRONXY CRUX 1S — a compact 180×180×180 mm 3D printer with a 275°C direct extruder and up to 300 mm/s high-speed printing. Whether you’re setting up the printer for the first time or troubleshooting first-layer adhesion, this step-by-step leveling guide is designed to help you get a clean, consistent first layer.
🛒 Get the TRONXY CRUX 1S here:
👉 store.tronxy.com/product-8000190.html
What’s covered in this video:
• Manual leveling basics — using the paper method and adjustment nuts under the platform
• Auto-leveler height adjustment — how to set the sensor and trigger point correctly
• Z-offset fine-tuning on the touch screen for the perfect first layer
• Quick tips to avoid common leveling mistakes
Why the CRUX 1S is beginner-friendly for leveling:
The CRUX 1S features a PEI heat bed (up to 110°C) and a straightforward leveling workflow. Many users report that the auto-level system “works quite well,” and Z-offset is easy to set directly from the touch screen. For manual adjustment, the large hand-screwing nuts under the bed make tramming more convenient and labor-saving.
Printer specs at a glance:
• Build volume: 180 × 180 × 180 mm
• Max speed: 300 mm/s(recommended 150 mm/s)
• Nozzle temp: up to 275°C;Bed temp: up to 110°C
• Nozzle diameter: 0.4 mm;Layer precision: Z-axis 0.0625 mm
• Slicer support: Cura、Simplify3D
Useful links:
• CRUX 1S product page: store.tronxy.com/product-8000190.html
• Tronxy FAQ & leveling reference: tronxy3dprinter.com/pages/faq
Timestamps:
0:00 Intro
0:30 Why leveling matters on the CRUX 1S
1:15 Manual leveling prep
3:00 Auto-leveler adjustment
5:30 Z-offset on touch screen
7:00 First-layer test
8:30 Final tips
If this helped you get a better first layer, hit Like and Subscribe for more TRONXY CRUX 1S guides. Drop a comment if you run into any leveling issues — I’ll try to help.
#TRONXY #CRUX1S #3DPrinting #BedLeveling #3DPrinterTutorial










