Uploaded June 2022 | Updated November 2026, 2 hours ago
The Atari 7800 has a curious quality. It supports two graphics resolutions, one using 160 pixels and another using 320 pixels (by up to 240 lines). It can also change resolutions on a line, allowing for more text characters on a line or higher definition graphical elements while the gameplay used the lower resolution for improved performance and lower memory cost. The 7800 can also mix and match resolutions in a frame, so the 320 pixel mode was sometimes used for a status bar on gameplay screens but not for the moving objects comprising the gameplay itself.
When the 320 pixel mode was used it could display predictable artifact colors because its pixel clock was 2x the NTSC color frequency. The 7800 also allowed for control over the colors the system directly produced with a palette of 256 colors, influencing the artifact colors much more so than an Apple II, which only outputs white pixels. Given that the 7800 could draw from a palette of 256 directly-generated colors, this ability could have been very versatile.
Unfortunately the 320 pixel mode and artifact colors were almost never used in commercial games during the 7800's commercial life. The only game that actually uses artifact color for gameplay is Tower Toppler, (originally known as Nebulus for the C64 and later Castelian on the NES) the game demonstrated in this video. Jinks uses artifact color for its static menu screen, but its actual gameplay uses 160 pixel mode.
Playing Tower Toppler on a PAL 7800 or an NTSC 7800 modded for S-Video or RGB is much less colorful experience because those signals do not decode high frequency luma as chroma, the key to artifact color in an NTSC composite or RF signal. In those display modes, the graphics will look very stripey. Then again, if you are in a PAL country, you really should be playing Nebulus on a C64, the experience is so much better than this port.
The bonus stage does not use artifact color for its gameplay, it uses 160-pixel mode, so only directly generated colors are visible. Tower Toppler has a stage select function. By setting the right difficulty switch to one position, the game will automatically cycle through levels, so you wait for the level you want to begin, then set the switch to the other position to play that level. I use this function to show some of the later levels.
The 7800 in this video has not been modified, I am capturing its RF output (the only output the 7800 provides) through a VCR, which converts the RF to composite video, which goes into the GV-USB2 capture device. The VCR has the benefit of also providing RF output, so I can play the game on a display that is not laggy like the capture window can be. I am not great at the game and I am using a Atari Flashback 2 joystick, the most precise 9-pin controller I have which does not require a power source. RF has noisy video, and I tried my best to reduce the audio noise without altering the sound. Best not to listen to this video at full volume. 60p capturing is available at 720p and above resolutions, something no other video I know of this game shows as captured on original hardware.
I have tried to make this video a "reference video" for the 7800 and its artifact color. To this end I have resized it to a 10:11 PAR to reflect what an Atari 2600 or 7800 should show. I have also ensured that whites are at or close to RGB values 255,255,255 and blacks at or close to 0,0,0 so one obtains a full range of color. Color is a little subjective because this is NTSC color we are dealing with, but I believe this color is well within the range of acceptable NTSC color reproduction.
The Atari 7800 has a curious quality. It supports two graphics resolutions, one using 160 pixels and another using 320 pixels (by up to 240 lines). It can also change resolutions on a line, allowing for more text characters on a line or higher definition graphical elements while the gameplay used the lower resolution for improved performance and lower memory cost. The 7800 can also mix and match resolutions in a frame, so the 320 pixel mode was sometimes used for a status bar on gameplay screens but not for the moving objects comprising the gameplay itself.
When the 320 pixel mode was used it could display predictable artifact colors because its pixel clock was 2x the NTSC color frequency. The 7800 also allowed for control over the colors the system directly produced with a palette of 256 colors, influencing the artifact colors much more so than an Apple II, which only outputs white pixels. Given that the 7800 could draw from a palette of 256 directly-generated colors, this ability could have been very versatile.
Unfortunately the 320 pixel mode and artifact colors were almost never used in commercial games during the 7800's commercial life. The only game that actually uses artifact color for gameplay is Tower Toppler, (originally known as Nebulus for the C64 and later Castelian on the NES) the game demonstrated in this video. Jinks uses artifact color for its static menu screen, but its actual gameplay uses 160 pixel mode.
Playing Tower Toppler on a PAL 7800 or an NTSC 7800 modded for S-Video or RGB is much less colorful experience because those signals do not decode high frequency luma as chroma, the key to artifact color in an NTSC composite or RF signal. In those display modes, the graphics will look very stripey. Then again, if you are in a PAL country, you really should be playing Nebulus on a C64, the experience is so much better than this port.
The bonus stage does not use artifact color for its gameplay, it uses 160-pixel mode, so only directly generated colors are visible. Tower Toppler has a stage select function. By setting the right difficulty switch to one position, the game will automatically cycle through levels, so you wait for the level you want to begin, then set the switch to the other position to play that level. I use this function to show some of the later levels.
The 7800 in this video has not been modified, I am capturing its RF output (the only output the 7800 provides) through a VCR, which converts the RF to composite video, which goes into the GV-USB2 capture device. The VCR has the benefit of also providing RF output, so I can play the game on a display that is not laggy like the capture window can be. I am not great at the game and I am using a Atari Flashback 2 joystick, the most precise 9-pin controller I have which does not require a power source. RF has noisy video, and I tried my best to reduce the audio noise without altering the sound. Best not to listen to this video at full volume. 60p capturing is available at 720p and above resolutions, something no other video I know of this game shows as captured on original hardware.
I have tried to make this video a "reference video" for the 7800 and its artifact color. To this end I have resized it to a 10:11 PAR to reflect what an Atari 2600 or 7800 should show. I have also ensured that whites are at or close to RGB values 255,255,255 and blacks at or close to 0,0,0 so one obtains a full range of color. Color is a little subjective because this is NTSC color we are dealing with, but I believe this color is well within the range of acceptable NTSC color reproduction.










