TotalMix 2.0 Beginners Guide – Episode 1: Audio Routing & Signal Flow @RMEAudio
TotalMix 2.0 Beginners Guide – Episode 1: Audio Routing & Signal Flow  @RMEAudio
Uploaded August 2026 | Updated November 2026, 1 day ago
Understanding Audio Routing is the foundation of mastering RME TotalMix 2.0.

In the very first episode of the TotalMix 2.0 Beginners Guide, you’ll learn the routing philosophy behind TotalMix and discover how audio travels through your RME interface.

Rather than behaving like a traditional mixing console, TotalMix is built around three dedicated rows:

• Hardware Inputs (Top Row)
• Software Playback Channels (Middle Row)
• Hardware Outputs (Bottom Row)

The two upper rows represent every available audio source, while the bottom row contains all physical outputs of your interface. Together, they form the routing architecture that makes TotalMix one of the most flexible audio routing environments available.

This episode introduces the Submix Principle—the core concept behind TotalMix—and shows you how to route any hardware input or software playback channel to any output in just a few clicks.

Once you understand these fundamentals, creating monitor mixes, headphone mixes, recording setups and streaming configurations becomes intuitive.

In this video you’ll learn

• The structure of the TotalMix interface
• Hardware Inputs explained
• Software Playback Channels explained
• Hardware Outputs explained
• The Submix Principle
• How audio routing works in TotalMix
• How to route audio to any output
• Why TotalMix is different from a traditional mixer

Whether you’re using a Babyface Pro FS, Fireface UCX II, Fireface UFX III, Fireface 802 FS, Digiface or another RME interface, the routing concepts shown in this video apply throughout the entire TotalMix ecosystem.

⸻

Chapters

00:00 – Intro

00:30 – Hardware Inputs

00:46 – Software Playback Channels

01:02 – Hardware Outputs

01:28 – Understanding the Submix Principle

02:12 – How to Route Audio to a Submix

04:21 – Outro

⸻

Compatible Products

• Fireface UFX III
• Fireface UFX II
• Fireface UCX II
• Fireface 802 FS
• Babyface Pro FS
• Digiface USB
• Digiface Dante
• Digiface AVB
• Digiface AES
• HDSPe Series
• Most RME interfaces running TotalMix 2.0
TotalMix 2.0 Beginners Guide – Episode 1: Audio Routing & Signal FlowSteadyClock FS - Referenzklasse für digitale Taktung erklärtHow to use RME Audio RME Audio TotalMix FX - 06 Mixer LayoutEmbracing MADI Technology by RME - Take5 MusicMartin Eyerer & RME HDSPe MADI FX German VersionMixdown to Analog Tape in TotalMix FXRME Audio DIGICheck - Test, Measurement and Analysis Tool#ExperienceRME at NAMM Show 2017How to use RME Audio TotalMix FX - 04 Fader GroupsAktualisierung der Firmware des ADI-2 DACRME Essentials: Babyface Pro FSADI-2 DAC Menu Walkthrough #04 - EQ
RME Audio |

TotalMix 2.0 Beginners Guide – Episode 1: Audio Routing & Signal Flow

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER