TotalBoat 2-PART TEAK WOOD CLEANER AND BRIGHTENING SYSTEM @TotalBoat
TotalBoat 2-PART TEAK WOOD CLEANER AND BRIGHTENING SYSTEM  @TotalBoat
Uploaded July 2023 | Updated November 2026, 1 hour ago
This two-part teak wood restoration system cleans and brightens, removing stubborn dirt, salt, stains, and mildew to restore teak’s natural, golden color.

UNDO YEARS OF SUN DAMAGE AND STAINS — IN MINUTES
If you’re partial to the gently weathered, driftwood-like, silvery gray color untreated teak turns, read no further. But if you’re going to oil, seal, or varnish teak to restore and maintain that golden beauty you originally fell in love with, it needs a thorough cleaning first with a teak cleaner that’s safe for use on teak.

The same thing goes if you’re tired of looking at tired-looking teak on your boat’s deck or trim. Especially haggard-looking, dark gray or black, pollution-ravaged, fuel-stained, suntan oil-soaked, fish-blood-and-guts-covered teak that’s seen brighter days – literally. Or moldy, mildewed teak that leaves black spots on bathing suits and towels. It can eventually ruin the teak, if left untreated.

Keeping teak wood clean prevents mold and mildew, enhances its beauty, and helps it last longer. TotalBoat Teak Cleaner restores it to its former, golden-hued glory.

IT’S OKAY TO GO AGAINST THE GRAIN, IN FACT, IT’S ABSOLUTELY NECESSARY
After applying part A to wet teak, scrub lightly across the grain to remove dirt. Going against the grain is important because Part A actually opens up the grain, and if you scrub in the direction of the grain you’ll be pushing the dirt in deeper instead of removing it. After rinsing away Part A with fresh water, apply Part B and scrub lightly across the grain again. Use fresh water to wash off Part B and you’ll be looking at cleaner, brighter teak – it’s that easy.

Before varnishing or sealing, let the teak dry completely for at least 24-48 hours. Cleaning the teak may raise the grain slightly, but a light sanding with take it back down.

PROTECT HARDWARE AND SURROUNDING SURFACES BEFORE STARTING
Harsh cleaners can dissolve and destroy expensive teak. TotalBoat Teak Cleaner will not harm teak, but it may hurt other surfaces.

Before starting, mask fiberglass, gelcoat, or aluminum surfaces that are near the area to be cleaned. Also, mask or remove any aluminum or painted parts attached to the teak. And be sure to protect yourself – especially hands and eyes – by wearing adequate personal protection.

Works quickly to break down and remove stubborn dirt, salt, stains and mildew
Dissolves and removes existing sealers
Lightens and brightens to restore teak’s natural, golden glow
Easy to apply to wetted teak wood, and requires only gentle scrubbing across the grain to lift dirt and grime
Easy-to-use formula: Part A cleans dirt, mildew, stains, and removes weathering; Part B neutralizes Part A and brightens; remove Part B by rinsing with clean, fresh water
Size: 2-Quart Kit includes 1 quart Part A Cleaner and 1 quart Part B Brightener

TOTALBOAT PRODUCTS COMMONLY USED WITH TOTALBOAT TEAK WOOD CLEANER
Halcyon Water-Based Varnish
Lust Rapid Recoat Spar Varnish
Gleam Spar Varnish
Wood Sealer Varnish Primer
Marine Wood Finish
Teak Oil
Danish Teak Sealer

TotalBoat Teak Cleaner: totalboat.com
TotalBoat 2-PART TEAK WOOD CLEANER AND BRIGHTENING SYSTEMSatisfying Epoxy Pour Rescue: Restoring a Firehouse Break Room Table #diy #transformationWhite vs. Neutral Gelcoat: Choose the Right BaseFrom Dull to WOW! Paddle Board Epoxy MagicWatch Jimmy Diresta Bring Deadwood Back to Life!How to Pour Epoxy Like a Pro for Your Tabletop!TotalBoat - RAZZO TERRAZZO TECHNIQUEHow to Repair Crazing on Your Boat | Boatworks Today with Andy MillerTotalBoat Outdrive AF Prop & Outdrive Aerosol SprayTotalBoat Hot Seat: Workbench Con 2023 Edition!
TotalBoat |

TotalBoat 2-PART TEAK WOOD CLEANER AND BRIGHTENING SYSTEM

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER