Uploaded February 2026 | Updated September 2026, 1 week ago
#cncmachine #madewithtormach
This is the installation video for the Self Assembled 770MX ML Mill. We guide you through the installation of the 770MX to give you a clear idea of all the steps.
Learn more about the Tormach 770MX - hubs.ly/Q03Yb6NK0 - powered by our free PathPilot® software hubs.ly/Q03Yb4tk0.
Brandon, our Machine Assembly Technician, shares the techniques he uses every day during the assembly of the Tormach mills, to make it easier for you during your install. If you do run into an issue, you should create a ticket from the support dropdown on our main page.
This video does not replace the Operator Manual. You should download the latest version for your mill from this link: tormach.com/support/mill/770mx-ml-documents
770MX Operator Manual - 0:00
Tool List - 0:47
Unboxing the 770MX Crates - 2:10
Adding Casters to Coolant Tank - 3:06
Lowering Stand Off of Pallet - 4:02
Lifting the 770MX Mill Onto the Stand with Lifting Bar and Engine Hoist - 4:55
Preparing for the ATC Installation - 10:02
Temporary Install of the 770MX Op Console - 10:28
Installation of the 770MX ATC - 13:11
Initial Setup of the ATC - 19:02
Alignment of the ATC - 20:28
Setup the Automatic Oiler - 25:40
Preparing for the 770MX Enclosure Install - 28:00
Removing the Enclosure Panels from the Crate - 28:38
Installing the Enclosure - 29:06
Installing the Enclosure Doors - 35:16
Aligning the Enclosure Doors - 37:34
Installing the Light Hardware - 38:45
Installing the Door Latch - 39:46
Installing the Side Windows - 41:40
Installing the Operator Console - 42:37
Application of Sikaflex to the Panels - 46:09
Installing the Air Nozzle - 50:54
Installing the Rear Access Panel - 52:16
Fill the Filter Regulator Lubricator - 53:09
Turning on the 770MX - 53:48
Tormach.com - hubs.ly/Q03YbhCc0
Tormach Support - hubs.ly/Q03Ybjry0
Submit Ticket - hubs.ly/Q03YbjF-0
Interested in a Tormach machine? Schedule a call with one of our team members at hubs.ly/Q029gf-H0 and they will be happy to answer any questions you have.
Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7
Join the Tormach Forums here: hubs.ly/Q029ggRV0
There are several ways to contact Tormach Technical Support.
If you want technical support, please follow these instructions to open a support ticket: hubs.ly/Q029ghcD0
Tormach Technical Support page: hubs.ly/Q029ghwW0
Tormach Technical Support contact: tormach.atlassian.net/servicedesk/customer/portals
Tormach 770MX - Self Assembly Installation
About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:
Visit our website: hubs.ly/Q029gj8M0
#cncmachine #madewithtormach
This is the installation video for the Self Assembled 770MX ML Mill. We guide you through the installation of the 770MX to give you a clear idea of all the steps.
Learn more about the Tormach 770MX - hubs.ly/Q03Yb6NK0 - powered by our free PathPilot® software hubs.ly/Q03Yb4tk0.
Brandon, our Machine Assembly Technician, shares the techniques he uses every day during the assembly of the Tormach mills, to make it easier for you during your install. If you do run into an issue, you should create a ticket from the support dropdown on our main page.
This video does not replace the Operator Manual. You should download the latest version for your mill from this link: tormach.com/support/mill/770mx-ml-documents
770MX Operator Manual - 0:00
Tool List - 0:47
Unboxing the 770MX Crates - 2:10
Adding Casters to Coolant Tank - 3:06
Lowering Stand Off of Pallet - 4:02
Lifting the 770MX Mill Onto the Stand with Lifting Bar and Engine Hoist - 4:55
Preparing for the ATC Installation - 10:02
Temporary Install of the 770MX Op Console - 10:28
Installation of the 770MX ATC - 13:11
Initial Setup of the ATC - 19:02
Alignment of the ATC - 20:28
Setup the Automatic Oiler - 25:40
Preparing for the 770MX Enclosure Install - 28:00
Removing the Enclosure Panels from the Crate - 28:38
Installing the Enclosure - 29:06
Installing the Enclosure Doors - 35:16
Aligning the Enclosure Doors - 37:34
Installing the Light Hardware - 38:45
Installing the Door Latch - 39:46
Installing the Side Windows - 41:40
Installing the Operator Console - 42:37
Application of Sikaflex to the Panels - 46:09
Installing the Air Nozzle - 50:54
Installing the Rear Access Panel - 52:16
Fill the Filter Regulator Lubricator - 53:09
Turning on the 770MX - 53:48
Tormach.com - hubs.ly/Q03YbhCc0
Tormach Support - hubs.ly/Q03Ybjry0
Submit Ticket - hubs.ly/Q03YbjF-0
Interested in a Tormach machine? Schedule a call with one of our team members at hubs.ly/Q029gf-H0 and they will be happy to answer any questions you have.
Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7
Join the Tormach Forums here: hubs.ly/Q029ggRV0
There are several ways to contact Tormach Technical Support.
If you want technical support, please follow these instructions to open a support ticket: hubs.ly/Q029ghcD0
Tormach Technical Support page: hubs.ly/Q029ghwW0
Tormach Technical Support contact: tormach.atlassian.net/servicedesk/customer/portals
Tormach 770MX - Self Assembly Installation
About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:
Visit our website: hubs.ly/Q029gj8M0
