Uploaded July 2019 | Updated September 2026, 21 minutes ago
Top 12 Electronics Projects On Breadboard Using IC, Transistor & Arduino (COMPILATION)
DIY 1: Adjustable Timer Circuit Or Delay Circuit Using IC 555
List Of Materials
1. 555 timer IC: banggood.com/custlink/vGmK26EmmM
2. Variable Resistors 103: banggood.com/custlink/33vmk6D7zn
3. Resistors: 1K Ohms and 10K Ohms: banggood.com/custlink/3vK3qBK14q
4. LED: banggood.com/custlink/mmvvz4DTBP
5. Breadboard: banggood.com/custlink/KGDvkgmTTU
6. 9V Battery (Rechargeable): banggood.com/custlink/vKvvq4hGm8
7. Battery Connector: banggood.com/custlink/KvmvMgEmKW
8. Jumper Wires: banggood.com/custlink/KDmvU0hKDN
DIY 2: AC Voltage Detector OR Wireless Tester Using 4017 IC.
List Of Materials
1. CD4017 IC.
2. Resistor: 1K Ohms
3. DC Buzzer: banggood.com/custlink/KDKKqBmuTg
4. BC547 Transistors: banggood.com/custlink/3DmvUe3fbK
5. Breadboard.
6. 9V Battery & Connector.
7. Jumper Wires.
DIY 3: 2 Channel TOUCH SWITCH Circuit Using 555 Timer IC
List Of Components & Materials:
1) 555 Timer IC.
2) 1K Ohms Resistors.
3) Breadboard.
4) LED.
5) Non Insulated Wires.
6) Jumper Wires.
7) Battery Connector.
8) 9v Battery.
DIY 4: LED Fade In And Fade Out Effect Circuit With 555 Timer IC
List Of Components & Materials:
1) 555 Timer IC.
2) 200K Resistor.
3) Breadboard.
4) LED.
5) 100uF Capacitors: banggood.com/custlink/D3KG20Gfk8
6) Jumper Wires.
7) BC547 Transistor.
8) 12V DC Adapter: banggood.com/custlink/3DDmM0Rmkm
DIY 5: KNOCK SWITCH Circuit Using 4017 IC.
List Of Materials
1. Piezo Plate: banggood.com/custlink/KmGKq0Y3ue
2. CD4017 IC.
3. 1K Resistor.
4. LED.
5. Breadboard.
6. 9V Battery & Connector.
7. Jumper Wires.
DIY 6: 2 Channel LED Chaser Circuit Using 555 Timer IC.
List Of Materials
1. 555 timer ic.
2. 2x LED.
3. Resistors: 220Ohms, 1K and 200K.
4. Jumper Wires.
5. Breadboard
DIY 7: LDR Darkness Sensor Circuit.
List Of Materials
1. 2N2222A: banggood.com/custlink/3mvDUeRKIv
2. Resistor: 100k Ohms.
3. Light Dependent Resistor (LDR): banggood.com/custlink/vvGKz6Ry6S
4. BreadBoard.
5. 9V Battery.
6. Battery Connector.
DIY 8: Touch Switch / Touch Sensor Circuit Using Single Transistor.
List Of Materials:
1) Transistor 2N2222/BC547.
2) 1K Ohms Resistor.
3) Breadboard.
4) LED.
5) Battery Connector.
6) 9V Battery.
7) Copper Wire.
DIY 9: LED Sequential Control Using Arduino For Beginners.
Arduino Code:
List Of Materials:
1. Arduino UNO: banggood.com/custlink/mv3mUgdvC3
2. 3x Resistor: 1K Ohms.
3. BreadBoard.
4. Jumper Wires.
5. 3x LED's.
DIY 10: LDR & LED Interfacing With Arduino.
Arduino Code: drive.google.com/open?id=1yPxPkKtMsnx-M6GnJEczTX1rcU3wHgvM
Circuit Diagram: drive.google.com/open?id=1Okx5EBoWyqAJ03Z6MTaDhSw0FLkC9dV4
List Of Materials:
1. Arduino UNO.
2. 9v Battery.
3. BreadBoard.
4. Jumper Wires.
5. Battery Connector.
6. Light Dependent Resistor (LDR).
7. 100KOhms Resistor.
8. LED (Lights)
DIY 11: LDR Interfacing with Arduino to Control AC Bulb.
Arduino Code: goo.gl/W3Wwpw
Circuit Diagram: goo.gl/Y68M2Z
List Of Materials For DIY Smart Lights:
1. Arduino UNO.
2. 9v Battery.
3. BreadBoard.
4. Jumper Wires.
5. Battery Connector.
6. Light Dependent Resistor (LDR).
7. 100KOhms Resistor
DIY 12: LDR & Buzzer Interfacing With Arduino.
Arduino Code: drive.google.com/open?id=1DUS58CeIpwgSByiWr1AXNVnHcKuGJGxv
Circuit Diagram: drive.google.com/open?id=1SE8tIdfp7MqkjPKQ4dXg68aZ5l9DVy-h
List Of Materials:
1. Arduino UNO.
2. 9v Battery.
3. BreadBoard.
4. Jumper Wires.
5. Battery Connector.
6. Light Dependent Resistor (LDR).
7. 100KOhms Resistor.
8. DC Buzzer.
NOTE: Watch video carefully and follow all the instructions in order to avoid mistakes in making this project, this circuit contain an IC which may be sensitive, so there no space for incorrect connections.
I explain almost everything about the circuit in subtitles, if you still face any problem, so ask me in comments below. I hope this electronics projects tutorial will be useful for you!
For more useful DIY videos please subscribe our channel "IdeasTV".
Please give us your precious feedback below in comments also like this video and share with your friends :)
Thanks! have a good day :)
Video Link: youtu.be/XaYUUgMFmvU
Facebook: goo.gl/UAw6D3
Twitter: twitter.com/IdeasTvOfficial
Instagram: instagram.com/IdeasTvOfficial
DISCLAIMER: This video description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. This help support the channel and allows us to continue to make videos like this. I only suggest those products that I personally love and use in the videos. Thank you so much for the support!
#ElectronicsProjects #BreadBoardTutorials #IdeasTV
Top 12 Electronics Projects On Breadboard Using IC, Transistor & Arduino (COMPILATION)
DIY 1: Adjustable Timer Circuit Or Delay Circuit Using IC 555
List Of Materials
1. 555 timer IC: banggood.com/custlink/vGmK26EmmM
2. Variable Resistors 103: banggood.com/custlink/33vmk6D7zn
3. Resistors: 1K Ohms and 10K Ohms: banggood.com/custlink/3vK3qBK14q
4. LED: banggood.com/custlink/mmvvz4DTBP
5. Breadboard: banggood.com/custlink/KGDvkgmTTU
6. 9V Battery (Rechargeable): banggood.com/custlink/vKvvq4hGm8
7. Battery Connector: banggood.com/custlink/KvmvMgEmKW
8. Jumper Wires: banggood.com/custlink/KDmvU0hKDN
DIY 2: AC Voltage Detector OR Wireless Tester Using 4017 IC.
List Of Materials
1. CD4017 IC.
2. Resistor: 1K Ohms
3. DC Buzzer: banggood.com/custlink/KDKKqBmuTg
4. BC547 Transistors: banggood.com/custlink/3DmvUe3fbK
5. Breadboard.
6. 9V Battery & Connector.
7. Jumper Wires.
DIY 3: 2 Channel TOUCH SWITCH Circuit Using 555 Timer IC
List Of Components & Materials:
1) 555 Timer IC.
2) 1K Ohms Resistors.
3) Breadboard.
4) LED.
5) Non Insulated Wires.
6) Jumper Wires.
7) Battery Connector.
8) 9v Battery.
DIY 4: LED Fade In And Fade Out Effect Circuit With 555 Timer IC
List Of Components & Materials:
1) 555 Timer IC.
2) 200K Resistor.
3) Breadboard.
4) LED.
5) 100uF Capacitors: banggood.com/custlink/D3KG20Gfk8
6) Jumper Wires.
7) BC547 Transistor.
8) 12V DC Adapter: banggood.com/custlink/3DDmM0Rmkm
DIY 5: KNOCK SWITCH Circuit Using 4017 IC.
List Of Materials
1. Piezo Plate: banggood.com/custlink/KmGKq0Y3ue
2. CD4017 IC.
3. 1K Resistor.
4. LED.
5. Breadboard.
6. 9V Battery & Connector.
7. Jumper Wires.
DIY 6: 2 Channel LED Chaser Circuit Using 555 Timer IC.
List Of Materials
1. 555 timer ic.
2. 2x LED.
3. Resistors: 220Ohms, 1K and 200K.
4. Jumper Wires.
5. Breadboard
DIY 7: LDR Darkness Sensor Circuit.
List Of Materials
1. 2N2222A: banggood.com/custlink/3mvDUeRKIv
2. Resistor: 100k Ohms.
3. Light Dependent Resistor (LDR): banggood.com/custlink/vvGKz6Ry6S
4. BreadBoard.
5. 9V Battery.
6. Battery Connector.
DIY 8: Touch Switch / Touch Sensor Circuit Using Single Transistor.
List Of Materials:
1) Transistor 2N2222/BC547.
2) 1K Ohms Resistor.
3) Breadboard.
4) LED.
5) Battery Connector.
6) 9V Battery.
7) Copper Wire.
DIY 9: LED Sequential Control Using Arduino For Beginners.
Arduino Code:
List Of Materials:
1. Arduino UNO: banggood.com/custlink/mv3mUgdvC3
2. 3x Resistor: 1K Ohms.
3. BreadBoard.
4. Jumper Wires.
5. 3x LED's.
DIY 10: LDR & LED Interfacing With Arduino.
Arduino Code: drive.google.com/open?id=1yPxPkKtMsnx-M6GnJEczTX1rcU3wHgvM
Circuit Diagram: drive.google.com/open?id=1Okx5EBoWyqAJ03Z6MTaDhSw0FLkC9dV4
List Of Materials:
1. Arduino UNO.
2. 9v Battery.
3. BreadBoard.
4. Jumper Wires.
5. Battery Connector.
6. Light Dependent Resistor (LDR).
7. 100KOhms Resistor.
8. LED (Lights)
DIY 11: LDR Interfacing with Arduino to Control AC Bulb.
Arduino Code: goo.gl/W3Wwpw
Circuit Diagram: goo.gl/Y68M2Z
List Of Materials For DIY Smart Lights:
1. Arduino UNO.
2. 9v Battery.
3. BreadBoard.
4. Jumper Wires.
5. Battery Connector.
6. Light Dependent Resistor (LDR).
7. 100KOhms Resistor
DIY 12: LDR & Buzzer Interfacing With Arduino.
Arduino Code: drive.google.com/open?id=1DUS58CeIpwgSByiWr1AXNVnHcKuGJGxv
Circuit Diagram: drive.google.com/open?id=1SE8tIdfp7MqkjPKQ4dXg68aZ5l9DVy-h
List Of Materials:
1. Arduino UNO.
2. 9v Battery.
3. BreadBoard.
4. Jumper Wires.
5. Battery Connector.
6. Light Dependent Resistor (LDR).
7. 100KOhms Resistor.
8. DC Buzzer.
NOTE: Watch video carefully and follow all the instructions in order to avoid mistakes in making this project, this circuit contain an IC which may be sensitive, so there no space for incorrect connections.
I explain almost everything about the circuit in subtitles, if you still face any problem, so ask me in comments below. I hope this electronics projects tutorial will be useful for you!
For more useful DIY videos please subscribe our channel "IdeasTV".
Please give us your precious feedback below in comments also like this video and share with your friends :)
Thanks! have a good day :)
Video Link: youtu.be/XaYUUgMFmvU
Facebook: goo.gl/UAw6D3
Twitter: twitter.com/IdeasTvOfficial
Instagram: instagram.com/IdeasTvOfficial
DISCLAIMER: This video description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. This help support the channel and allows us to continue to make videos like this. I only suggest those products that I personally love and use in the videos. Thank you so much for the support!
#ElectronicsProjects #BreadBoardTutorials #IdeasTV
